What is the heat transfer coefficient inside the tubes of a solar collector in which the tubes are 10 mm in diameter and separated by a distance of 100 mm? The collector is 1.5 m wide and 3 m long and has total flow rate of water of 0.075kg/s. The water average temperature is 80°C. Assume you have 15 tubes. Hint:need find Nu by equation not graph?

What is the heat transfer coefficient inside the tubes of a solar collector in which the tubes are 10 mm in diameter and separated by a distance of 100 mm? The collector is 1.5 m wide and 3 m long and has total flow rate of water of 0.075kg/s. The water average temperature is 80°C. Assume you have 15 tubes. Hint:need find Nu by equation not graph?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I need the answer as soon as possible
REFERENCE: FROM BOOK - ENGINEERING THERMOFLUIDS, M. MASSOUD
To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe (k, = 45 W/m-K) has an inside diameter of D₁, 1 = 150 mm and wall thickness t; = 20 mm while the outer steel pipe has an inside diameter of D₁,2 = 250 mm and wall thickness to = 1;. Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation (k = 0.055 W/m-K) between the two pipes does not exceed its maximum service temperature of 7p,max = 70°C. The ocean water is at T, = -5°C and provides an external convection heat transfer coefficient of h, = 500 W/m²K. The convection coefficient associated with the flowing crude oil is h; = 450 W/m².K. (2) It is proposed to enhance the performance of the…
Problem 6. ART TAT Consider the cylindrical pipe shown in the figure. Heat is being generated in the pipe wall at a rate of R in units of W/m³, and the thermal conductivity of the wall is k, the heat transfer coefficients at the inside and outside of the pipe are h; and ho, respectively. At a given location along the pipe axis, the temperature of the fluid flowing inside of the pipe is Ti and that at the outside is To i. ii. Find the expression for the temperature distribution in the pipe wall. Find the total heat transfer rate from the pipe to both fluids.
Water going into a pipe with a tempeture of T1 and going out T2 . ambient tempeture is T0. flow rate q. Develop an expression for T2 ( based on heat transfer) Length of the pipe Lh0 - convective heat transfer coefficient of the airhW -convective heat transfer coefficient of the waterk- pipe thermal conductivity (W/m·K)d – pipe diameter Use any other varilable that you need and can be found online easily .
G. ?" Which matcrial has the higher themal conductivity'? d: 5. (ht What is the overall heat-transfer coefficicnt U? Describe a physical situation,in す 5コ . :- which it could be used. 石:.5 . (c) A standard Schedule 405 cm steel pipe (inside diameter 5.25 cm and wall thickness 040 cm) čarrying steam is lagged (i.e insulated) with 5.0 cm of 85 per cent magnesia covered in turn with 5.0 cm of cork. Estimate the heat loss per hour per meter of pipc if the inner surface of the pipe is at 120°C and the outer surface of the cork is at 32°C. The thermal conductivitics of the substances concerned are 9. of Material Thermal Conductivity [Watts/ha K] Steel 45 85% Magnesia (0.07 Cork 0.05 At いい 1
Q₁: Find the heat transfer rate by adding straight fins of rectangular cross section of length 50 mm and thickness of 0.5 mm when the heat transfer coefficient from the surface is 40 W/m K and for the fins is 30 W/m°K and k=900 W/m K, surface area (1x1) and distance fins 4 mm. Ans 51526.25
During a wall heat flux measurement, at the instantaneous time t, we obtained the following values: Q = 30/ Tal = 20 °C Tse = 5°C Calculate the instantaneous U-Value at time t m²K (Note: R₂ = 0.13 W and R = 0.04³)
To cool hot oil, an engineer has suggested that the oil be pumped through a pipe submerged in a nearby lake. The pipe (external diameter = 15 cm) will be placed in the horizontal direction. The temperature of the outer surface of the pipe averages 125 ° C. The surrounding water temperature is assumed to be constant at 15 ° C. Pipe length 125 m. If it is assumed that there is no water movement. a. Determine the convective heat transfer coefficient of the outer pipe surface to the water. = Answer Watt / (m² ° C) b. Determine the heat transfer rate from the pipe to the water. = Answer kW
A Figure illustrates the tube-flow system. The heat transfer under developed flow conditions when the flow remains laminar. The wall temperature is Tw, the center of the tube temperature is Te the radius of the tube is re, and the velocity at the center of the tube is uo. The velocity distribution equation is: 1 uo Prove that: 1 aT uor. T - T= a ax 4 ro Start the solution of the equation : P{żar drjuc,T 1 a ()- aT 1 әт ur дr ar « дх
PROBLEM: IVB-46 FROM THE BOOK: ENGINEERING THERMOFLUIDS, M. MASSOUD.