Water (p = 1000 kg/m²) is flowing through a subterranean circular cylindrical pipe with radius 4.00 cm ata depth below ground of 13.5 m. The water in this section has a speed of 1.25 m/s and a gauge pressure of1.00 × 10° Pa. At a point downstream, the width of the pipe has widened to a radius of 9.00 cm, and thedepth of the pipe has increased to 28.0 m. At this downstream location, what is the10 pts. (a) velocity of the water.*s (b) absolute pressure?NOTE: Patm = 1.01 × 105 Pa.

Step 1: To find the velocity and absolute pressure downstream, we can apply the principle of…

Answered: Water (p = 1000 kg/m²) is flowing…

Similar questions

A water pipe having a 2.84 cm inside diameter carries water into the basement of a house at a speed of 0.940 m/s and a pressure of 204 kPa. If the pipe tapers to 1.82 cm and rises to the second floor 6.82 m above the input point, what are the (a) speed and (b) water pressure at the second floor? (a) Number Units (b) Number Units
A 2.0 cm diameter pipe carries water into a house with a pressure of 4.00 x 10^5 Pa and with an inflow speed of 1.5 m / s. A second tube of 1.0 cm in diameter and that it is connected to the main pipe carries water to a bath that is in a second floor at 5.0 m high. Find (a) the speed of the water flow (b) the pressure and (c) the ratio of volume flow (in liters per second), in the bath
Problem 3: Water flows through a horizontal cylindrical pipe from a smaller-diameter region to a larger-diameter region. At point A, where the pipe's diameter is 3.5 cm, the water's speed at 25.0 m/s. At point B, the pipe's diameter is 7.0 cm. (a) What is the water's speed at point B? (b) What is the pressure difference between points A and B? Which point has the greater pressure?
A pump provides pressure to the lower end of a long pipeline that supplies water from a reservoir to a house located on a hill 150 m vertically upward from the lower end of the pipe (where the water is initially at rest before being pumped). The pipeline has a constant diameter of 3.5 cm, and the upper end of the pipeline is open to the atmosphere. What pressure must the pump provide for water to flow from the upper end of the pipeline at a rate of 5.0 m/s?
A meat baster consists of a squeeze bulb attached to a plastic tube. When the bulb is squeezed and released, with the open end of the tube under the surface of the basting sauce, the sauce rises in the tube to a distance h, as the drawing shows. Using 1.013 × 105 Pa for the atmospheric pressure and 1340 kg/m³ for the density of the sauce, find the absolute pressure PB in the bulb when the distance h is (a) 0.16 m and (b) 0.08 m. (a) PB = (b) PB = i <
A water pipe having a 2.20 cm inside diameter carries water into the basement of a house at a speed of 0.792 m/s and a pressure of 240 kPa. If the pipe tapers to 1.44 cm and rises to the second floor 6.14 m above the input point, what are the (a) speed and (b) water pressure at the second floor? (a) Number i (b) Number i Units Units
A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity and to provide sufficient pressure in the pipes that deliver the water to customers. The drawing shows a spherical reservoir that contains 6.54 x 105 kg of water when full. The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in (a) house A and (b) house B. Ignore the diameter of the delivery pipes. BB B Vent 15.0 m Faucet 7.30 m A 日日 AAT (a) Number i Units (b) Number Units Faucet-
A water pipe having a 2.92 cm inside diameter carries water into the basement of a house at a speed of 0.936 m/s and a pressure of 185 kPa. If the pipe tapers to 1.57 cm and rises to the second floor 6.94 m above the input point, what are the (a) speed and (b) water pressure at the second floor?
A meat baster consists of a squeeze bulb attached to a plastic tube. When the bulb is squeezed and released, with the open end of the tube under the surface of the basting sauce, the sauce rises in the tube to a distance h, as the drawing shows. Using 1.013 × 105 Pa for the atmospheric pressure and 1470 kg/m3 for the density of the sauce, find the absolute pressure PB in the bulb when the distance h is (a) 0.18 m and (b) 0.09 m. A cylindrical storage tank has a radius of 1.08 m. When filled to a height of 3.27 m, it holds 13100 kg of a liquid industrial solvent. (c) What is the density of the solvent?
A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity and to provide sufficient pressure in the pipes that deliver the water to customers. The drawing shows a spherical reservoir that contains 3.09 x 10 kg of water when full. The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in (a) house A and (b) house B. Ignore the diameter of the delivery pipes. Vent Faicet 7.30m Faucet (a) Number Units Units (b) Number