Water enters at 20 °C at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 110 °C at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. °C. The length of the tube is 14 m, and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 k/kg.°C, respectively. Select one: O a. 31.3 °C O b. 22.6 °C O c. 24.7 °C O d. 25.5 °C

Water enters at 20 °C at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 110 °C at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. °C. The length of the tube is 14 m, and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 k/kg.°C, respectively. Select one: O a. 31.3 °C O b. 22.6 °C O c. 24.7 °C O d. 25.5 °C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A condenser consists of several tubes. The outer diameter of each tube is 2 cm, and the thickness is 2 mm. It is designed to condense saturated steam that enters the condenser at the mass flow rate of 100 kg/s. The steam pressure is 10 kPa. There is 10% moisture in saturated steam. The inlet temperature of cooling water is 20°C, and the outlet temperature is 40°C. Water velocity 2 m/s. The overall heat transfer coefficient based on outer surface area is 3.5 3. kW/m2.K. The heat capacity of water is 4.2 kJ/kg.K. Water density is 1000 kg/m'. Find the number of tubes and the length of each tube.
In a once-through boiler, feed water enters through the bottom of tubes, receives heat from combustion of coal, and escapes from the top of the tubes as superheated steam, calculate the heat transfer coefficients of water and superheated steam using the following data: Pressure of feed water at tube inlet = 22.0 MPa Absolute temperature of feed water, Tf =523 K Pressure of superheated steam at tube outlet = 22.5 MPa %3D Absolute Temperature of superheated steam, Tg = 868 K Velocity of Feed water through each tube. Vf = 8 m/s Internal diameter of each tube = 53.5 mm %3D Length of pipe = 120m Use, Density of water = 818.25 kg/m3 Density of steam = 63.34 kg/m3 %3D
Water at 90C is being pumped from a large storage tank at 1 atm abs at a rate of 0.189 m3/min by a pump. The motor that drives the pump supplies energy to the pump at a rate of 2 hp. The water pumped through a heat exchanger, where it gives up 700 kW of heat and is then delivered to a large open storage tank at an elevation of 20 m above the first tank. What is the final temperature of the water to the second tank? Neglect kinetic energy.
A double-pipe parallel-flow heat exchanger is to heat water (cp=4180 J/kg*K) from 25°C to 80°C at a rate of 0.5 kg/s. The heating is to be accomplished by geothermal water (cp = 4310 J/kg*K) available at 160°C at a mass flow rate of 0.75 kg/s. The inner tube is thin-walled and has a diameter of 1 cm. If the overall heat transfer coefficient of the heat exchanger is 550 W/m²*K, determine the length of the tube required to achieve the desired heating.
A parallel flow double-pipe heat exchanger is to heat water from 20°C to 90°C at a rate of 1.4 kg/s. The heating is to be accomplished by geothermal water available at 160°C at a mass flow rate of 2.2 kg/s. The inner tube is thin-walled and has a diameter of 1.5 cm. If the overall heat transfer coefficient of the heat exchanger is 650 W/m2°C, determine the length of the heat exchanger required to achieve the desired heating. The specific heats of water and geothermal fluid to be 4180 and 4310 J/kg °C, respectively.Select one:a. 100.6 mb. 81.7 mc. 121.3 md. 195.4 m
The water (C, = 4180 J/kg - °C) enters the 2.5-cm internal-diameter tube of a double-pipe counter-flow heat exchanger at 17°C at a rate of 3 kg/s. It is heated by steam condensing at 120°C (he = 2203 kJ/kg) in the shell. If the overall heat transfer coefficient of the heat exchanger is 1500 W/m? - °C, determine the length of the tube required in order to heat the water to 80°C. Steam 120°C Water 80°C 17°C 3 kg/s
Answer the question below
Required information Consider a water-to-water counterflow heat exchanger with these specifications. Hot water enters at 70°C while cold water enters at 20°C. The exit temperature of the hot water is 15°C greater than that of the cold water, and the mass flow rate of the hot water is 50 percent greater than that of the cold water. The product of heat transfer surface area and the overall heat transfer coefficient is 2200 W/K. Take the specific heat of both cold and hot water to be cp= 4180 J/kg.°C. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Cold water 20°C Hot water °C Th, in Determine the effectiveness of the heat exchanger. The effectiveness of the heat exchanger is 0.5807
In order to cool a mass flow rate of 55 Kg/h of air (cp = 1060 J/KgoC) at 300o C, it is passed through the tube side of a counter flow heat exchanger with a length of 2 m and 2.54 cm tube outer diameter. Thecooling water, (cp = 4182 J/Kg o C and ρ = 1000 Kg/m3 ), enters the heat exchanger at a temperature of 30o C with a volume flow rate of 0.6 Litre/min. If the overall heat transfer coefficient, U, is 5.83 W/m2oC andthe effectiveness of the heat exchanger 60 %, calculate the following:a. The heat transfer rate,b. The exit temperatures of both the water and the air,c- The surface area of the heat exchanger,
Water enters at 20 ℃ at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 90 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. ℃. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 kJ/kg.℃, respectively. Select one: a. 32.7 ℃ b. 30.5 ℃ c. 24.3 ℃ d. 28.8 ℃
A body is desired to be heated with hot water and oil on the body side in a heat exchanger with 20 pipe passes. The inner and outer diameters of the copper pipe are 20 and 24 mm, respectively. Water with a flow rate of 0.2 kg / s enters the pipe at 87 ° C and leaves at 43 ° C. The inlet and outlet temperatures of the oil in the heat exchanger are 7 ° C and 37 ° C, respectively. Average heat transfer coefficient on the outer surface of the pipes is 800 W / m ° K. The fouling resistances on both sides are negligible.Determine;a) Heat transfer b) External surface based total heat transfer coefficient, c) Determine the pipe length in one pass.
Water enters at 20 ℃ at a rate of 0.2 kg/s in a double-pipe parallel flow heat exchanger is to be heated to 70 ℃ by geothermal water that enters the heat exchanger at 155 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient of the heat exchanger is 500 W/m2. ℃. The internal diameter of the tube is 1.2 cm. Determine the length of the heat exchanger. The specific heats of the water and geothermal water are given to be 4.18 and 4.31 kJ/kg.℃, respectively. Select one: a. 25.4 m b. 30.5 m c. 20.7 m d. 27.5 m