Water enters at 20 C at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 100 C at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 w/m2. "C. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the air. The specific heats of the water and air are given to be 4.18 and 1.01 kj/kg.C. respectively. Select one: O a. 82.6 C O b. 74.7 C O . 72.5 C O d. 86.2 C

Water enters at 20 C at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 100 C at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 w/m2. "C. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the air. The specific heats of the water and air are given to be 4.18 and 1.01 kj/kg.C. respectively. Select one: O a. 82.6 C O b. 74.7 C O . 72.5 C O d. 86.2 C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What are the common causes of fouling in a heat exchanger? How does fouling affect heat transfer and pressure drop?
Required information Consider a water-to-water counterflow heat exchanger with these specifications. Hot water enters at 70°C while cold water enters at 20°C. The exit temperature of the hot water is 15°C greater than that of the cold water, and the mass flow rate of the hot water is 50 percent greater than that of the cold water. The product of heat transfer surface area and the overall heat transfer coefficient is 2200 W/K. Take the specific heat of both cold and hot water to be cp= 4180 J/kg.°C. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Cold water 20°C Hot water °C Th, in Determine the effectiveness of the heat exchanger. The effectiveness of the heat exchanger is 0.5807
An engineer designed a double pipe heat exchanger where the hot fluid (cp=2400 J/kg.K) enters at a temperature of 100 °C with a flowrate of 0.1 kg/s and is wanted to leave at a temperature of 60 °C. On the other hand, the cold fluid (cp=1200 J/kg.K) enters the heat exchanger at a temperature of 30 °C with a flowrate of 0.2 kg/s and is wanted to be heated up to 70 °C. Show that whether this design is realistic or not. If yes, what is the flow configuration (i.e. counter or parallel flow)?
Water enters at 20 ℃ at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 90 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. ℃. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 kJ/kg.℃, respectively. Select one: a. 32.7 ℃ b. 30.5 ℃ c. 24.3 ℃ d. 28.8 ℃
A body is desired to be heated with hot water and oil on the body side in a heat exchanger with 20 pipe passes. The inner and outer diameters of the copper pipe are 20 and 24 mm, respectively. Water with a flow rate of 0.2 kg / s enters the pipe at 87 ° C and leaves at 43 ° C. The inlet and outlet temperatures of the oil in the heat exchanger are 7 ° C and 37 ° C, respectively. Average heat transfer coefficient on the outer surface of the pipes is 800 W / m ° K. The fouling resistances on both sides are negligible.Determine;a) Heat transfer b) External surface based total heat transfer coefficient, c) Determine the pipe length in one pass.
QUESTION 10 Consider a water-to-water counter-flow heat ex-changer with these specifications. Hot water enters at 95 °C while cold water enters at 20 °C. The exit temperature of hot water is 15 °C greater than that of cold water, and the mass flow rate of hot water is 50 percent greater than that of cold water. The product of heat transfer surface area and the overall heat transfer coefficient is 1400 W/m².ºC. Taking the specific heat of both cold and hot water to be Cp = 4180 J/kg.ºC, determine i. the outlet temperature of the cold water, ii. the effective-ness of the heat exchanger, iii. the mass flow rate of the cold water, and iv. the heat transfer rate.
Hot oil, which enter a cross-flow heat exchanger at 200 C and leave at 100 C, are used to heat water at a flow rate of 1.5 kg/s from 30 to 120 C. The overall heat transfer coefficient based on the water-side surface area is U = 220 W/m2 . K. Determine : a) the required water surface area Ac using the NTU method(let effectiveness €=0.65). b) Ac when we change the water outlet temperature to 130Cc) discuss the effect of changing the water outlet temperature to Ac? d)draw the temperature profile along the heat exchanger
Water enters at 20 ℃ at a rate of 0.2 kg/s in a double-pipe parallel flow heat exchanger is to be heated to 70 ℃ by geothermal water that enters the heat exchanger at 155 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient of the heat exchanger is 500 W/m2. ℃. The internal diameter of the tube is 1.2 cm. Determine the length of the heat exchanger. The specific heats of the water and geothermal water are given to be 4.18 and 4.31 kJ/kg.℃, respectively. Select one: a. 25.4 m b. 30.5 m c. 20.7 m d. 27.5 m
How to determine the pressure drop caused by a shell-and-tube heat exchanger? Is there a catalog with these constant values?
A Counter-flow heat exchanger (water-to-water) with these specifications. Hot water enters at 95 °C while cold water enters at 20 °C. The exit temperature of hot water is 15 °C greater than that of cold water, and the mass flow rate of hot water is 50 percent greater than that of cold water. The product of heat transfer surface area and the overall heat transfer coefficient is 1400 W/K. Taking the specific heat of both cold and hot water to be Cp = 4180 J/kg K, Calculate: (a) The outlet temperature of the cold water, (b) LMTD (c) The effectiveness of the heat exchanger, (d) The mass flow rate of the cold water, (e) The heat transfer rate.
A stream of ammonia is cooled from 100oC to 20oC at a rate of 180 kg/hr in the tube side of a double-pipe counter-flow heat exchanger. Water enters the heat exchanger at 10oC at a rate of 250 kg/hr. The outside diameter of the inner tube is 3 cm and the length of the pipe is 7m. Using the log-mean temperature difference, calculate the overall heat transfer coefficient (U) for the heat exchanger. Determine the log-mean temperature difference. Determine the heat transfer coefficient for the heat exchanger. Cp for ammonia is 5234J/kgK and cp for water is 4180J/kgK.
Water enters at 20 ℃ at a rate of 0.2 kg/s in a double-pipe parallel flow heat exchanger is to be heated to 60 ℃ by geothermal water that enters the heat exchanger at 145 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient of the heat exchanger is 500 W/m2. ℃. The internal diameter of the tube is 1.2 cm. Determine the length of the heat exchanger. The specific heats of the water and geothermal water are given to be 4.18 and 4.31 kJ/kg.℃, respectively. Select one: a. 27.7 m b. 25.5 m c. 30.5 m d. 20.2 m