Water enters a crossflow heat exchanger (both fluids unmixed) at 16 °C and flows at the rate of 7.5 kg/s to cool 10.0 kg/s of air from 120 °C. For an overall heat transfer coefficient of 225 W/m² K and an exchanger surface area of 240 m², what is the exit air temperature? Taking the specific heats of the air and water to be constant at 1.014 and 4.182 kJ/kg K, respectively,

Water enters a crossflow heat exchanger (both fluids unmixed) at 16 °C and flows at the rate of 7.5 kg/s to cool 10.0 kg/s of air from 120 °C. For an overall heat transfer coefficient of 225 W/m² K and an exchanger surface area of 240 m², what is the exit air temperature? Taking the specific heats of the air and water to be constant at 1.014 and 4.182 kJ/kg K, respectively,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a double-pipe, counter-flow heat exchanger, water entering at 1 kg/s is heated from 23°C to 69°C as it flows thru the inner pipe. Hot oil enters the heat exchanger at 2 kg/s and 110°C. The convection heat transfer coefficients in the cold- and hot-sides are 100 and 50 kW/m2.0C, respectively. Calculate the required heat transfer area in m?. Take cp = 4.18 kJ/kg.°C for water, and cCp = 1.67 kJ/kg.°C for oil. Round your answer to 2 decimal places. Add your answer
A thin-walled double-pipe heat exchanger is to be used to cool oil (cp= 2500 J/kg-K) from 80°C to 50°C at a rate of 5 kg/s by water (cp= 4200 J/kg.K) that enters at 20°C at a rate of 2 kg/s. The diameter and length of the tube considered for the heat exchanger is 2.5 cm and 2 meters. The convective heat transfer coefficients for the oil and water are assumed to be ho = 400- and W m²c W hw = 600 , respectively. m²c' a. Determine if a parallel or counter flow heat exchanger should be used in this case (tell reason and show calculation) b. Using LMTD method, determine the number of pipes required for the heat exchanger
A single-pass, cross-flow heat exchanger uses hot exhaust gases (mixed) to heat water (unmixed) from 30 to 70 °C at a rate of 3 kg/s. The exhaust gases, having thermophysical properties similar to air, enter and exit the exchanger at 200 and 100 °C, respectively. If the overall heat transfer coefficient is 200 W/m2 ·K, estimate the required surface area. Hint : from 30 to 70 °C at a rate of 3 kg/s.
Water enters at 20 ℃ at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 90 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. ℃. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 kJ/kg.℃, respectively.Select one:a. 30.5 ℃b. 24.3 ℃c. 28.8 ℃d. 32.7 ℃
A long counter-flow heat exchanger cools water from 40°C to 10°C by passing the water via the inner tube through an enclosure of cold fluid. The water is flowing through a 3-cm diameter tube at a rate of 0.27 kg/s. The cold fluid enters the enclosure at −10°C and has a convection coefficient of 1200 W/m².K. The mass flow rate of the cold fluid and its specific heat are 1.2 kg/s and 1340 J/kg-K, respectively. (a) Assuming the flow is fully developed, find out the convection coefficient of the water flow. (b) What is the length of the heat exchanger? 1554 W/m²K 2 21.9m Water Cold Fluid
Water enters at 20 °C at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 110 °C at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. °C. The length of the tube is 14 m, and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the water. The specific heats of the water and air are given to be 4.18 and 1.01 kj/kg.°C, respectively. Select one: O a. 31.3 °C O b. 22.6 °C O C. 24.7 °C O d. 25.5 °C
With reference to the schematic below, a thin-walled double-pipe counter-flow heat exchanger is to be used to cool a hot fluid (cp=2200 J/kg.°C) from 150°C to 50°C at a rate of 2 kg/s by water (cp = 4180 J/kg°C) that enters at 22°C at a rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is 6 m. Determine the overall heat transfer coefficient, U of this heat exchanger. Hot fluid 150°C Cold water 22°C 150°C Assumptions: 1.Steady operating conditions exist. 2 The heat exchanger is well-insulated so that heat loss to the surroundings is negligible.
A steam condenser operates at 61 cm of Hg vacuum. The steam enters the condenser with a moisture content of 87%. Cooling water is supplied to the condenser at a temperature of 20 C with a terminal difference of 5 C. The water velocity of water inside the tube is to be limited to 2.5 m/s when using 2.5 cm outside diameter tubes whose thickness is 1.75 mm. The overall heat transfer coefficient of the tubes could be approximated by the equation U = 1213.4(v1/2), W/(m2-C) where v is the water velocity in m/sec. Determine: 1. The required mass flow of cooling water, kg/s 2. The required capacity of the circulating pump, liter per second 3. The Logarithmic Mean Temperature Difference, C 4. The required Number of tubes 5. The required length of tubes, (m), and number of passes
Water enters at 20 ℃ at a rate of 0.1 kg/s in a double-pipe counter flow heat exchanger is to be heated by hot air that enters the heat exchanger at 90 ℃ at a rate of 0.3 kg/s. The overall heat transfer coefficient based on the inner side of the tube to be 100 W/m2. ℃. The length of the tube is 14 m and the internal diameter of the tube is 1.4 cm. Determine the outlet temperature of the air. The specific heats of the water and air are given to be 4.18 and 1.01 kJ/kg.℃, respectively. Select one: a. 82.6 ℃ b. 74.7 ℃ c. 72.5 ℃ d. 77.9 ℃
An adiabatic heat exchanger is used to heat cold water at 15°C entering at a rate of 5 kg/s with hot water at 90°C entering at a rate of 4 kg/s. If the exit temperature of hot water is 50°C, the exit temperature of cold water is (a) 42°C (b) 47°C (c) 55°C (d) 78°C (e) 90°C
A thin-walled double-pipe counter-flow heat exchanger is to be used to cool oil (Cpo= 2200 J/kg.K) from 150°C to 40°C at a rate of 2 kg/s by water (Cpw= 4180 J/kg.K) that enters at 22°C at a rate of 1.5Kg/s. If the diameter of the tube is 2.5 cm, and its length is 6 m, determine * The rate of heat transfer in the heat exchanger * The outlet temperature of the cold fluid * The Log Mean Temperature Difference (LMTD) * The overall heat transfer coefficient
The oil (cp = 1 795 W-s/kg-K) from an oil-cooled electric transformer is cooled from 79.4 oC to 29.4 oC at the rate of 1 360.5 kg/h. This is done in an oil-water het exchanger that receives 2 948 kg/h of water at 15.6 Celsius. For the exchanger, U = 295 W/m2-K. Find the exit water temperature and heating area required (a) for counter flow and (b) for parallel flow.