Water at 60 F from a lake through 500 ft if 4in ID cast iron pipe at a water turbine 250 ft below the surface of the lake. After flowing from the turbine, the water is discharged into the atmosphere through a horizontal 50 ft section of the same pipe. The turbine power output is 10hp when the water in the discharged pipe is flowing at 5 ft/s. What is the turbine efficiency defined as the actual power output of the turbine divided by the power output that would be withdrawn if there are no friction within the turbine. If the turbine were by passed, what would be the flow rate of water through the 500 ft of 4in pipe.

Water at 60 F from a lake through 500 ft if 4in ID cast iron pipe at a water turbine 250 ft below the surface of the lake. After flowing from the turbine, the water is discharged into the atmosphere through a horizontal 50 ft section of the same pipe. The turbine power output is 10hp when the water in the discharged pipe is flowing at 5 ft/s. What is the turbine efficiency defined as the actual power output of the turbine divided by the power output that would be withdrawn if there are no friction within the turbine. If the turbine were by passed, what would be the flow rate of water through the 500 ft of 4in pipe.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter40: Typical Operating Conditions

Section: Chapter Questions

Problem 10RQ: The seasonal energy efficiency ratio (SEER) includes the energy used in the _____and _____cycles.

See similar textbooks

Similar questions

NOTE THE ANSWER SHOULD BE 10.75m3/s Find the flow rate of water through the sytem shown for the turbine to produce 20 kW. Neglect friction in your calculations NOTE: THE ANSWER SHOULD BE 10.75m3/s
What is the turbine output of 100m head and delivering 1 cu. m/ sec in a hydro electric power plant if turbine efficiency is 88%?
1. A pump delivers 50 L/s of water and consumes 10HP of power by the pump system. Determine head developed by the pump. 2. A pump receives 8 kgs of water at 220 kPa and 110°C and discharges it at 1100 kPa. Compute the power required in kW. 3. A water pump develops a total head of 200 ft. The pump efficiency if 80%and the motor efficiency is 87.5 %. If the power rate is 1.5 cents per kw-hr, what is the power cost for pumping 1000 gal? 4. A hydraulic turbine receives water from a reservoir at an elevation of 100 m above it. What is the minimum water flow in kg/s to produce a steady turbine output of 50 MW? 5. A hydro-electric plant discharges water at the rate of 0.75 m³/s and enters the turbine at 0.35 mps with a pressure of 275 kPa. Runner inside diameter is 550 mm, speed is 520 rpm, and the turbine efficiency is 98%. Find the turbine speed factor. 6. A double overhung impulse turbine of 85% efficiency is direct connected to a 30,000 kW generator of 95% efficiency. Elevation of…
The available flow of water is 25 cu. m/ sec at 30 m elevation. If a hydro electric plant is to be installed with turbine efficiency of 85% and generator efficiency 90%, what maximum power that the plant could generate?
Que 4.35. A reaction turbine is revolving at a speed of 200 rpm and develops 5886 kW SP when working under a head of 200 m with an overall efficiency of 80 %. Determine unit speed, unit discharge and unit power. The speed ratio for the turbine is given as 0.48. Find the speed, discharge and power when this turbine is working under a head of 150 m.
3. For a Pelton turbine the pressure of the flow before the nozzle is 5 bar while the velocity of flow leaving the nozzle is 31m/s. If the speed of the turbine is 500 rpm and the wheel diameter is 1.5 m, the efficiency of the nozzle will be: а. 0.96 b. 0.97 с. 0.98 d. 0.99 e. None of the them.
2. A pump draws water from a lake delivered to a height of 50 meters above the lake and encounters 15 meters of headloss. Determine the pump power requirement in Kilo-Watts to deliver a constant supply of 500 Liters per second? The correct answer has a margin of 1 from exact answer. Velocity head is neglected.
Provide the diagram for the problem. Choose the correct answer and provide complete solution. Water at 60 F from a lake through 500 ft if 4in ID cast iron pipe at a water turbine 250 ft below the surface of the lake. After flowing from the turbine, the water is discharged into the atmosphere through a horizontal 50 ft section of the same pipe. The turbine power output is 10hp when the water in the discharged pipe is flowing at 5 ft/s. A. What is the turbine efficiency defined as the actual power output of the turbine divided by the power output that would be withdrawn if there are no friction within the turbine? a. 86%b. 65%c. 77%d. 50% B. If the turbine were by passed, what would be the flow rate of water through the 500 ft of 4in pipe. a. 45 lb/sb. 37 lb/sc. 52 lb/sd. 29 lb/s
Draw the right diagram for the problem. Show complete solution. Water at 60 F from a lake through 500 ft if 4in ID cast iron pipe at a water turbine 250 ft below the surface of the lake. After flowing from the turbine, the water is discharged into the atmosphere through a horizontal 50 ft section of the same pipe. The turbine power output is 10hp when the water in the discharged pipe is flowing at 5 ft/s. a. What is the turbine efficiency defined as the actual power output of the turbine divided by the power output that would be withdrawn if there are no friction within the turbine? b. If the turbine were by passed, what would be the flow rate of water through the 500 ft of 4in pipe?
A turbine of Kaplan type operates under a dam on height of 30m, the discharge of water equal to 180m3/sec. the efficiency overall is 92%. Calculates the power produced by this turbine.
Identify what is the system in this problem and write the general energy balance equation (no need to solve) A turbine is driven by a system that enters the turbine at the ff. conditions: 200 kg/h, 39 atm, 501 deg C, 49 m/s linear speed. The steam exits at a point 8 meters below the inlet stream of the turbine with the following conditions: atmospheric pressure, 290 m/s speed. 69000 W of shft work is delivered by the turbine while 100 kcal/h heat is lost. What is the specific delta H?
Consider a pumped hydro system that is used for energy storage. During off-peak hours, excess electricity is used to pump water up to a storage reservoir. During peak demand periods the flow is reversed and electric power is generated by flowing the water through a hydraulic turbine. The storage reservoir is 100 m above the hydro turbine/pump units and the hydraulic turbine can accommodate up to 650 l/s (liters per second) of flow.a.How much area would the pumped storage reservoir need to be to store 1000 MWh of hydro energy if its average depth were 10m? Express your answer in acres. Is this reasonable?(91.06 acres)Thepotential energy of water in the reservoir can be calculated as gH, where is the density of water, gis gravitational acceleration, and His the effective head of the system.First calculate the total volume of water required in meters, then the surface area of the reservoir if it is 10m deep on average. Then convert to acres.b.Estimate the theoretical power…