Using USD or ultimate strength design method, design a simply supported reinforced concrete beam 0.25 meters wide and 5.0 meters long, carrying only a wall load of 8.70 kN/m including its own weight. Keep the steel ratio within 2% and use 20 mm diameter reinforcing bars. Use fy = 414 MPa and fc'= 27.6 MPa and a minimum concrete cover 65 mm. Indicate the depth and number of reinforcing bars on the figure. %3D Cone. cover

Using USD or ultimate strength design method, design a simply supported reinforced concrete beam 0.25 meters wide and 5.0 meters long, carrying only a wall load of 8.70 kN/m including its own weight. Keep the steel ratio within 2% and use 20 mm diameter reinforcing bars. Use fy = 414 MPa and fc'= 27.6 MPa and a minimum concrete cover 65 mm. Indicate the depth and number of reinforcing bars on the figure. %3D Cone. cover

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Arch 486 Detail Problem: 2023 Detail Problem Draw a pinned connection and a fixed connection for steel, wood and concrete. The connection can be beam to beam, beam to column, truss member to truss member or any other types of connections that we have reviewed. Draw and label the connection materials and components. Describe or indicate how the connection is pinned or fixed.
Define Belling buckets
Differentiate half sectioning & full sectioning.
A CPLD is precisely what?
The area of a duct opening must be 84 sq in. The duct must be placed abovea ceiling and must be 7 inches high. What length must the duct opening be?
Sluice gate succinctly described with illustrations
draw finished floor to floor height = 3000m total width of stair (u shaped stair) = 2400 mm
Q23 Draw your own neat and detailed sketch of a Simple Flap Gate and paste this into the Student answer: section below. Ensure that you label all significant features of this mechanism.
Please help
Why clamp handles are used?
Define Fabric drain.
Provide sketches of at least four different rebar tying “knots”