Using the information below, select the correct answers below:CiAna360Discharge:a.O b.O C.O d.5.52 m³/s2.52 m³/s31.2 m³/s37.8 m³/sQC = 0.60A (ha) = 70Time of concentration, Tc(mins) = 0.02 L0.77 S-0.385Length of travel = 8000mElevation difference = 25mTime to the peak, Tp = 0.7Tc1=984Tp-0.623h = 1 m

C=0.6A=70 haLength of travel=8000 mElevation difference= 25mh=1mTo find- Discharge

Using the information below, select the correct answers below: CiAna 360 C = 0.60 A (ha) = 70 Time of concentration, Tc(mins) = 0.02 L0.77 S-0.385 Length of travel = 8000m Elevation difference = 25m Time to the peak, Tp = 0.7Tc

Using the information below, select the correct answers below: CiAna 360 C = 0.60 A (ha) = 70 Time of concentration, Tc(mins) = 0.02 L0.77 S-0.385 Length of travel = 8000m Elevation difference = 25m Time to the peak, Tp = 0.7Tc

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: The flow is occurring in a rectangular channel at a velocity of m/sec and a depth of 0.2 m.…

A: Given: The velocity of flow is 0.46 m/sec. The depth is 0.2 m. The upstream depth is 1.2 m.

Q: Find the magnitude of the net force on the following object (A) given: |F1|=3.2 N |F2 -9.8 N |F3❘ =…

Q: Equation

Q: 20 k- 20 ft 40 k- E F | 20 ft 60 k B C 30 k 60 k - 3 at 30 ft = 90 ft

A: To find force in member HI and EI

Q: 1. Complete the differential level notes shown below, perform the customary arithmetic check,…

A: Leveling is the process in which we measure the levels of the various point of field in a linear or…

Q: The points on the e vs log P curve for a normally - consolidated clay have the following…

A: To find the primary consolidation settlement

Q: ++ 0.3 m S2 3.15 m ++ 0.3 m B. 7.0 m ++ 0.3 m 1.2 m 0.3 m 4.2 m 0.3 m 1.4 m 300 mm #+ +1 140 mn 360…

A: Hi! Thank you for the question As per the honor code, We’ll answer the first question since the…

Q: 1. Complete the differential level notes shown below, perform the customary arithmetic check,…

A: Formulas Used: 1.Mean Rdg= (Upper + Middle + Lower ) Rdg/ 3 2.S = (Upper - Lower) Rdg 3. H.I =…

Q: PROBLEM 2: A support block is acted upon by two forces as shown. Knowing that the coefficients of…

Q: A hydraulic structure is sized for a 50 year recurrence interval design discharge. What is the risk…

A: Given, T = 50years Risk of exceedence in 20 years = ?

Q: PROBLEM 4: The basic barometer can be used to measure the height of a Spoints building. If the…

A: Convert the pressure at top and bottom into kPa(kilo pascals). Then using manometric equation the…

Q: report highway lab "Flash & Fire Point Test" same quations 1-Importance of “Flash and fire points…

A: Importance of “Flash and fire points test : Volatiles are emitted when the bitumen is heated at…

Q: QUESTION 3 Two titanium bars are joined together to make a truss structure as shown in Figure below.…

Q: Aerial photography is to be taken of a tract of land that is X-mi square. Flying height will be H ft…

Q: A circular region of radius R/2 is cut out from the circular region of radius R as shown. For what…

Q: From the given figure below and its properties, calculate the stress at the top where at the fixed…

A: Compression is taken as positive where as tension as negative. As the beam is symmetrical about…

Q: rectangular plan surface 5 m wide and 7 m deep lies in water in such a way that its plane makes an…

Q: IV- Double Integration Method 4. Determine the slope and deflection at B and the maximum deflection…

Q: The tension AB in the truss as shown in the figure below, is 100 N .Fill the following blanks: 2 m D…

Q: 2. A large-capacity faucet is to be connected to a water main by 20-mm diameter copper tubing as…

A: D = 20 mm f = 0.02 Q = 50 L/min or 0.000833 m3/s

Q: QUESTION 7 1. Using the following data, determine the elevation in BM-13? (give your answer in two…

A: To find the Elevation of BM-13 and To find the difference of Elevation between BM-12 and BM-13

Q: Elevation and temperature data for places are tabulated below: Elevation 'm' temp. °C 4 21.25 444…

A: Given - Elevation, = 4 m, then Temperature, = 21.25o Elevation, = 444 m, then Temperature = 15.70o…

Q: 1) Determine the Centroid of the Shaded Area, Tabulate your answers and solution Y 450 mm 300 mm r=…

Q: According to the figure below, fill out the table showing all your calculations: a) find the…

Q: The fill volume between stations 49+00 and 50+00, in cubic yards, is: (Choose the most correct…

Q: -Problem ABCDE6. A student counted 50, 52, 53, 51, 53, and 51 paces in walking along a 45-m course…

Q: Three piezometers have been installed in the confined aquifer having a uniform thickness of 4.6 m.…

Q: This wood flume has a slope of 0.0015. What will be the discharge of water in it for a depth of 1 m?…

A: step 1-

Q: Question 6 The catchment area of a drainage basin is 2100 km². The length of mainstream (L) is equal…

A: Given: The catchment area of drainage basin, A = 2100 km2 The length of mainstream, L = 80 km…

Q: Flood Routing • HW// • Q3/ Use the Muskingum Routing method to route the following hydrograph.…

A: Muskingum Routing method Given that K = 24 hr x = 0.2 ∆t = 12 hrs

Q: For the drainage system of irrigation project, 18 trocars was tested according to the difference…

A: Given:- Number of trocars=18 To find:- a)Median,mode b) Standard deviation

Q: 1. Complete the differential level notes shown below, perform the customary arithmetic check,…

Q: indly answer immediatelyy, thankyousomuch -Problem ABCDE6. A student counted 50, 52, 53, 51, 53,…

A: The number of paces along 45m course are =50,52,53,51,53,51Azimuth of given line =7°

Q: Q3: Given the ordinate of 2 hr. UH. Drive the ordinate of 8-hr. U.H? T(hr.) 2-h UH 300 4 720 6 800…

A: Let's solve above problem using S-Curve method.

Concept explainers

Landfills

The landfill is a site used for the disposal of waste materials. The landfill is a solid waste facility that is often known as a dumping ground. The image below shows a landfill site in Hawaii. Landfilling is the most ancient and common method used for the disposal of waste. For the landfill, a deep trench is constructed in an isolated place away from the city. The trench for landfills is designed properly after analyzing the total population and the waste generation per capita. The waste is dumped into the trench and after every layer of waste, a layer of soil is spread on the top of it.

Question

Using the information below, select the correct answers below:
CiAna
360
Discharge:
a.
O b.
O C.
O d.
5.52 m³/s
2.52 m³/s
31.2 m³/s
37.8 m³/s
Q
C = 0.60
A (ha) = 70
Time of concentration, Tc(mins) = 0.02 L0.77 S-0.385
Length of travel = 8000m
Elevation difference = 25m
Time to the peak, Tp = 0.7Tc
1=984Tp-0.623
h = 1 m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data

VIEW

Step 2: Determination of time of concentration

VIEW

Step 3: Intensity of rainfall determination

VIEW

Step 4: Determination of discharge

VIEW

Solution

VIEW

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

2.41. What conclusion can be drawn from the results given below for a BOD analysis made using three dilutions? PERCENT WASTE 1 2 3 BOD. g/m³ 200 120 80
Question 4 Screenings are placed in a debris roll-off dumpster that holds 20 cubic yards of screening. How long will it take to fill the 20 cubic yard dumpster in days? Known Unknown Flow 8.0 MGD Time to fill dumpster, days Screening removed gal/day-100 gal/day Capacity of dumpster = 20 cubic yards 7.48 gallon in a cubic ft (ft3) 27 cubic ft in a cubic yard (yd3) = O 0.72 days O 100 days O 40.39 days
show complete solutions please I need it asap
Q2-3/ An agricultural farm is cultivated by crops. Available data are: dr = 1.2 (m), A = 50 (Hectare), G=1.35, Gs=2.7.and (wy)% = 15%. ¿Compute values of (dw)F ANSWER/ (Wv)s=50%, (wv)d = 15%, (Wv)F = 35% (dw)F= 0.42 (m of water depth/ one Irrigation process).
Sanitary engineering
Following observations were made on a 4% dilution of waste water: DO of aerated water used for dilution = 4 mg/It. DO of diluted sample after 5 days of incubation = 0.8 mg/lt. DO of original waste water sample = 0.5 mg/lt. What is the value of ultimate BOD? [Take Kp (at base 10) = 0.12 day
The storage existing in a river reach at a given time is 13 acre-ft, and at the same time, the inflow to the reach is 450 cfs and the outflow is 500 cfs. One hour later, the inflow is 500 cfs and the outflow is 530 cfs. Calculate the change in storage during the hour in cubic meters and acre-feet.
A venture meter with diameter of 0.15 m at the throat is installed in an 0.45 m water main. A differential manometer gauge is partially filled with mercury and connected to the meter as shown below. Neglecting loss, what is the discharge through the meter? 0.38 • Mercury (S.G= 13.6)
Check the accuracy of the water analysis given in Problem CONSTITUENT Ca+2 Mg¹2 K Na* HCO, CI CO₂ SO₁ -2 CONCENTRATION. g/m² 2.00 85.05 39.10 92.00 61.00 284.00 3.00 288.00
at a particular time,the storage in a river reach is 60*10^3m^3.At that time ,the inflow into the reach is 10m^3/s and the outflow is 16m^3/s.After two hours ,the inflow and the outflow are 18m^3/s and 20m^3/s respectively.Determine the change in storage during two hours period and the storage volume after two hours.
I need a project management solution
please answer ASAP