Using the following information: ·A binary system of A and B metallic elements, which are partially soluble in the solid state. • Consider linear solidus, liquidus, solvus lines. • The melting point of element A is 1000 °C and the melting point of element B is 1250°C. · The system has a eutectic reaction which occurs at 750°C, at a composition of CE: 25 wt% A. · The solid solution formed in A rich region a; the maximum solid solubility of B in a is 7%wt at eutectic temperature and drops to 3%wt at room temperature. · The solid solution formed in B rich region is B: the maximum solid solubility of A in B is 5%wt at eutectic temperature and drops to 0%wt at room temperature. (d) Calculate the mass fractions of the two solids for the alloy with a composition of 50%wt A-50%wt B just below eutectic temperature.

Using the following information: ·A binary system of A and B metallic elements, which are partially soluble in the solid state. • Consider linear solidus, liquidus, solvus lines. • The melting point of element A is 1000 °C and the melting point of element B is 1250°C. · The system has a eutectic reaction which occurs at 750°C, at a composition of CE: 25 wt% A. · The solid solution formed in A rich region a; the maximum solid solubility of B in a is 7%wt at eutectic temperature and drops to 3%wt at room temperature. · The solid solution formed in B rich region is B: the maximum solid solubility of A in B is 5%wt at eutectic temperature and drops to 0%wt at room temperature. (d) Calculate the mass fractions of the two solids for the alloy with a composition of 50%wt A-50%wt B just below eutectic temperature.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

For alloys of two hypothetical metals A and B, there exist an x, A-rich phase, and a ß, B-rich phase. From the mass fractions of both phases for two different alloys provided in the table below, (which are at the same temperature), determine the composition of the phase boundary (solubility limit) for both a and ß phases at this temperature. Show complete solution. Alloy Composition Fraction & Phase Fraction 3 phase 70 wt% A - 30 wt% B 0.78 35 wt% A - 65 wt% B 0.36 0.22 0.64
Quenching is a process used to preserve at room temperature a phase which exists in equilibrium at high temperature but which would decompose during equilibrium cooling. Explain the basis of this process in the precipitation process and martensitic transformation. Use phase diagrams when necessary.
(a) Figure 5 shows a phase diagram for the Nb-80 wt% W alloy which is solidified under under the nonequilibrium condition. Evaluate (i) the liquidus temperature (ii) the non-equilibrium solidus temperature (iii) the freezing range (iv) the composition of the first solid form during solidification (v) the composition of the last liquid to solidify (vi) the phase(s) present, the composition of the phase(s) and the amount of the phase(s) at 3000 °C (vii) the phase(s) present, the composition of the phase(s) and the amount of the phase(s) at 2800 °C.
A 1.5-kg specimen of a 88 wt% Pb-12 wt% Sn alloy (Animated Figure 9.8) is heated to 220°C; at this temperature it is entirely an a- phase solid solution. The alloy is to be melted to the extent that 50% of the specimen is liquid, the remainder being the a phase. This may be accomplished either by heating the alloy or changing its composition while holding the temperature constant. (a) To what temperature must the specimen be heated? i °C (b) How much tin must be added to the 1.5-kg specimen at 220°C to achieve this state? i kg
During freezing of a Cu-Zn alloy, we find that the composition is non-uniform. By heating the alloy to 600°C for 3 hours, diffusion of zinc helps to make the composition more uniform. What temperature would be required if we wished to perform this homogenization treatment in 30 minutes?
Using the following information: ·A binary system of A and B metallic elements, which are partially soluble in the solid state. • Consider linear solidus, liquidus, solvus lines. • The melting point of element A is 1000 °C and the melting point of element B is 1250°C. • The system has a eutectic reaction which occurs at 750°C, at a composition of CE: 25 wt% A. · The solid solution formed in A rich region a; the maximum solid solubility of B in a is 7%wt at eutectic temperature and drops to 3%wt at room temperature. • The solid solution formed in B rich region is B; the maximum solid solubility of A in B is 5%wt at eutectic temperature and drops to 0%wt at room temperature. (b) Name all regions within the phase diagram.
Consider the binary Magnesium-Lead phase diagram below.
(d)The microstructure of an iron-carbon alloy consists of pro-eutectoid cementite and pearlite; the mass fractions of these microconstituents are 0.11 and 0.89, respectively. Determine the concentration in wt% of carbon in this alloy. Is the steel hypoeutectoid or hypereutectoid?
Temperature zones, A, B, C and D, for a range of heat-treatment processes for carbonsteel are shown in Figure 2 below. Identify and explain the heat-treatment processrepresented by the zones
For two hypotetical materials which have limitless solubility for both in the “liquid” and “solid” states in each other, the following data are listed. Melting Temperatures of material A and B are Tm,A and Tm,B respectively, Liquidus and Solidus curves are circular arcs. a- Draw the related “Phase Diagram” of Material A and Material B showing the data given and calculated. b- Calculate/Determine the compositions of phases at T2 , explain the procedure. c- Calculate/Determine the “percentages” of “phases” of Alloy,2 at T2 , explain the procedure. Given: -Tm,A, Celcius =300 -Tm,B, Celcius =800 -T1, Celcius =600 -B percentage of Liquid phase at T1 =25 -B percentage of Solid phase at T1 =70 -B percentage of Alloy 2. =50 -T2, Celcius =650 -B percentage of Liquid phase of Alloy 2 at T2 = to be calculated -B percentage of Solid phase of Alloy 2 at T2 = to be calculated
What is degree of reaction? Give expressions of reaction rate equations by degree of reaction.
In a binary Fe-Fe3C system, what is the transformation that occurs when cooling an austenistic mixture of 2% C by weight from 1100°C to below the eutectoid temperature? What is the microstructure, and how is it formed? What are the concentrations of the total and partial phases? Data: eutectoid temperature: 723 ºC, eutectoid concentration: 0.76% C, limit concentration of ferrite: 0.022%, limit concentration of cementite: 6.7%.