A uniform disk of mass 10.0 kg and radius of 0.248 m spins at 302 rev/min on a low-friction axle. It must be brought to a stop in 1.00 min by a brake pad that makes contact with the disk at an average distance of 0.218 m from the axis. The coefficient of frictionbetween the pad and the disk is 0.499. A piston in a cylinder of diameter 5.00 cm presses the brake pad against the disk. Find the pressure required for the brake fluid in the cylinder.PaNeed Help?Read It

Answered: Image /qna-images/answer/f0aec879-fd40-4030-8370-74fc55aa9386.jpg

uniform disk of mass 10.0 kg and radius of 0.248 m spins at 302 rev/min on a low-friction axle. It must be brought to a stop in 1.00 min by a brake pad that makes contact with the disk at an average distance of 0.218 m from the axis. The coefficient of frie tween the pad and the disk is 0.499. A piston in a cylinder of diameter 5.00 cm presses the brake pad against the disk. Find the pressure required for the brake fluid in the cylinder. Pa Jeed Heln? Raad It

uniform disk of mass 10.0 kg and radius of 0.248 m spins at 302 rev/min on a low-friction axle. It must be brought to a stop in 1.00 min by a brake pad that makes contact with the disk at an average distance of 0.218 m from the axis. The coefficient of frie tween the pad and the disk is 0.499. A piston in a cylinder of diameter 5.00 cm presses the brake pad against the disk. Find the pressure required for the brake fluid in the cylinder. Pa Jeed Heln? Raad It

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

5,00 h A hollow sphere of mass 2.6 kg and radius 2 cm starts to roll (without slipping) down an incline of height 0.5 m. At the bottom of the incline, the sphere makes a head-on and perfectly inelastic collision with a box of mass 5.4 kg and the two objects slide together accross the ground. The coefficient of kinetic friction between the objects and the ground is 0.4. Determine the following quantities (take g = 9.81 m/s^2): (a) Kinetic energy of the sphere at the bottom of the incline (before collision) (in joules) (b) The speed of the system of two objects right after the collision (m/s) Hint: during the collision, model the two objects as point-like particles (c) The distance that the system of two objects travels from the bottom of the incline until they stop (m) (Give your answers as numbers (without any units or percentage...) with 3 significant figures. Use dot() for decimal point)
The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F₁60 N, and at C it is Fo 155 N (Eigure 1) Figure 50 mm Figure 10 mm 50 mm The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F =60 N. and at C it is Fe=155 N. (Figure 1) 20 mm- 10 mm 1 of 1 mm. 1 of 1 Part A Z Determine the and y components of the reaction force on the rocker arm ABC at the pin for equilib Express your answers using three significant figures separated by a comma. 195] ΑΣΦ | 11 | voc | B₁, B,= Submit Part B Part B Fo Submit Request Answer Determine the magnitude of the force along the spring DF for equilibrium.…
a bucket of water with a mass of 25 kilograms is lifted from a well by a rope which is wound around a cylinder with a radius of 0.10 meters. A 0.50 meter crank is attached to the cylinder so that it wraps the rope around the cylinder. what is the minimum force that must be applied to the crank to lift the water bucket ?
One popular design of a household juice machine is a conical, perforated stainless steel basket 3.30 cm high with a closed bottom of diameter 8.00 cm and open top of diameter 13.40 cm that spins at 23000 revolutions per minute about a vertical axis. Solid pieces of fruit are chopped into granules by cutters at the bottom of the spinning cone. Then the fruit granules rapidly make their way to the sloping surface where the juice is extracted to the outside of the cone through the mesh perforations. The dry pulp spirals upward along the slope to be ejected from the top of the cone. The juice is collected in an enclosure immediately surrounding the sloped surface of the cone. Pulp D Motor Spinning basket Juice spout (a) What centripetal acceleration does a bit of fruit experience when it is spinning with the basket at a point midway between the top and bottom? m/s² ---Direction--- (b) Observe that the weight of the fruit is a negligible force. What is the normal force on 1.50 g of fruit at…
The velocity of the 8-kg cylinder is 0.3 m∕s at a certaininstant. The mass of the grooved drum is 12 kg, its centroidal radiusof gyration is k = 210 mm, and the radius of its groove isri = 200 mm. The frictional moment at O is a constant3 N∙m. Find the frictional force if final speed is given to be 2.5.
A lamina V of uniform mass density and total mass M kilograms occupies the region between y = l - x 2 and the x-axis (with distance measured in meters). Calculate the rotational kinetic energy if V rotates with angular velocity w = 4 radians per second about: (a) the x-axis. (b) the z-axis.
The moment of inertia for a set of objects of mass m; rotating about a common axis is defined as 1 = Σm₁r? 2 where r, is the distance of the ith object to the axis of rotation. If there are many particles that make up a larger object then this sum transforms into an integral, 4-fff or a. I = dV, V where p is the mass density and V the volume of the object. In this exercise we will explore moment of inertia by rolling two objects down an incline plane in the Experimental Math Lab Space.
A potter's wheel—a thick stone disk with a radius of 0.570m and a mass of 118kg—is freely rotating at 41.0rev/min. The potter can stop the wheel in 5.30s by pressing a wet rag against the rim and exerting a radially inward force of 68.1N. Calculate the effective coefficient of kinetic friction between the wheel and the rag.
A hoop of mass 3.00 kg and radius 1.00 m is moving at 3π rad/s across a horizontal surface. The coefficient of friction between the hoop and the surface is 0.65. Calculate how far the hoop will travel before it comes to rest.
The flywheel of a steam engine runs with a constant angular velocity of 132 rev/min. When steam is shut off, the friction of the bearings and of the air stops the wheel in 1.40 h. (a) What is the constant angular acceleration, in revolutions per minute-squared, of the wheel during the slowdown? (b) How many revolutions does the wheel make before stopping? (c) At the instant the flywheel is turning at 66.0 rev/min, what is the tangential component of the linear acceleration of a flywheel particle that is 42.7 cm from the axis of rotation? (d) What is the magnitude of the net linear acceleration of the particle in (c)?
Among the elderly population, a sideway fall is a most frequent cause of hip fracture. An old man of mass 65 kg and height 1.7m was sent to Prince of Wales Hospital due to sideway fall. He slipped and fell laterally down with a straight body. Before falling, his centre of mass was 0.9 m above ground. His centre of mass was on the ground at the end of the fall. The radius of gyration about the anterior-posterior axis at his centre of mass was 0.55 m. (a) Calculate the initial potential energy before his fall. (b) Assuming his potential energy would be converted to linear kinetic energy of his centre of mass and rotational kinetic energy about his centre of mass, calculate the impact velocity v of his centre of mas right before he hit the ground. C. M. 1.7m 0.9m
The 11 kg disk has an angular velocity of w = 20 rad/s. (Figure 1) Figure 400 mm 500 mm 200 mm- A B ⒸO 500 mm с P (N) 5 2 1 of 1 -t(s) Part A If the brake ABC is applied such that the magnitude of force P varies with time as shown, determine the time needed to stop the disk. The coefficient of kinetic friction at B is μ = 0.4. Neglect the thickness of the brake. Express your answer to three significant figures and include the appropriate units. t = 0 Submit Value μA Provide Feedback Request Answer Units ? Next >