Two long ideal solenoids (with radii 20mm and 30 mm, respectively) have the same number of turns of wire per unit length. The smaller solenoid is mounted inside the larger, along a common axis. The magnetic field within the inner solenoid is zero. The current in the inner solenoid must be; half the current in the outer solenoid one-third the current in the outer solenoid twice the current in the outer solenoid the same as the current in the outer solenoid Otwo-thirds the current in the outer solenoid

Two long ideal solenoids (with radii 20mm and 30 mm, respectively) have the same number of turns of wire per unit length. The smaller solenoid is mounted inside the larger, along a common axis. The magnetic field within the inner solenoid is zero. The current in the inner solenoid must be; half the current in the outer solenoid one-third the current in the outer solenoid twice the current in the outer solenoid the same as the current in the outer solenoid Otwo-thirds the current in the outer solenoid

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

An electron is moving at a speed of 1.70 x 104 m/s in a circular path of radius of 3.2 cm inside a solenoid. The magnetic field of the solenoid is perpendicular to the plane of the electron's path. The solenoid has 25 turns per centimeter. (a) Find the strength of the magnetic field inside the solenoid. (b) Find the current in the solenoid.
In a solenoid in vacuum of length l = 10 cm with 2052 turns per meter the current creates the field B = 70 µT. What will be the value of the current if the solenoid is placed in an external uniform magnetic field Bext = 35 µT with field lines exactly opposite to the field produced by the solenoid? Assume µo = 4Tt × 10¬7 H/m and give your answer in milli-amperes (mA).
For a technical application, an electrical engineer needs to create a solenoid using copper wire with diameter d = 0.500 mm. The resistance of the solenoid needs to be 5.10 2 and the magnetic field of the solenoid with a current of 3.10 A should be 5.90 x 10-2 T. Assume the resistance does not change significantly with temperature, and the radius of the solenoid is 1.00 cm. (Use p = 1.70 x 1080 m for the resistivity of copper.) (a) How many turns of wire does the electrical engineer need? turns (b) Determine the required length (in cm) of the solenoid. cm
Chapter 30, Problem 023SN The figure shows two parallel loops of wire having a common axis. The smaller loop (radius r) is above the larger loop (radius R) by a distance x>>R. Consequently, the magnetic field due to the counterclockwise current / in the larger loop is nearly constant throughout the smaller loop. Suppose that x is increasing at the constant rate dx/dt = v. (a) Find an expression for the magnetic flux through the area of the smaller loop as a function of x. In the smaller loop, find (b) an expression for the magnitude of the induced emf and (c) the direction of the induced current. R. (a) ? ENI (ь) 2 Edit (c)
A very long solenoid having a square cross section 5.0 cm on a side is connected to a power supply that drives enough current through the solenoid to create a 0.20-T magnetic field in its interior. Imagine that we surround this solenoid with a circular loop 10 cm in diameter whose resistance is 0.015 Ω and which is oriented with its face perpendicular to the solenoid’s axis. Suppose that when we switch off the power supply, it takes 30 ms for the current flowing through the solenoid to drop to zero. About how much current flows in the loop during this time?
What current is required in the windings of a solenoid that has 900 turns evenly distributed over a length of 0.5 m, to produce in the center of the solenoid a magnetic field of magnitude 7X10-3 T?
A closely wound solenoid 80 cm long has 5 layers of windings of 400 turns each. The diameter of the solenoid is 1.8 cm. If the current carried is 8.0 A, estimate the magnitude of B inside the solenoid near its centre.