(Two circular bars.) one of brass and the other of steel, are to be loaded by a shear load of 30 kN. Determine(the necessary diameteh of the bars (a) in single shear, (b) in double shear, if the shear stress in the two materials must not exceed 50 MN/m and 100 MN/m² respectively. 2. Ans: [27.6, 19.5, 19.5, 13.8mm.]

(Two circular bars.) one of brass and the other of steel, are to be loaded by a shear load of 30 kN. Determine(the necessary diameteh of the bars (a) in single shear, (b) in double shear, if the shear stress in the two materials must not exceed 50 MN/m and 100 MN/m² respectively. 2. Ans: [27.6, 19.5, 19.5, 13.8mm.]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two solid cylindrical rods (1) and (2) are joined together at flange B and loaded as shown. If F₁ = 13 kips, F₂ = 34 kips, and the normal stress in each rod must be limited to 22 ksi, determine the minimum diameter d₁ required for rod (1). A (2) d₁ F₂ B C O 1.087 in. O 0.823 in. O 0.541 in. O 0.867 in. O 1.003 in. d₂
3. A solid bar having a diameter of 160 mm is to be replaced by a rectangular tube having cross- sectional area of 150 mm x 310 mm to the median line of the cross-section. (a) Determine the required thickness of the tube so that the maximum shear stress in the tube will not exceed the maximum shear stress in the solid bar. (b) Determine the shear stress in the tube . If it is subjected to a torque T = 15 kN-m and a thickness of 10 mm. and (c) Determine the angle of twist in degrees of the tube if the length of the tube is 1000 mm and the shear modulus is 75 GPa. Thickness of the tube is 10 mm and the torque T = 15 kN-m.
STRENGTH OF MATERIALS (NO LONG EXPLANTION NEEDED. RATE WILL BE GIVEN) Two blocks of wood, 50 mm wide and 20 mm thick are glued together as shown. If P is 600N, the shearing stress in the glued joint is
PROBLEM No.1 If the wood joint shown in the figure has width of 200 mm, determine the average shear stress developed along shear planes a - a and b - 6. 8KN 8KN 125 mm 150 mm
The timber member has a cross-sectional area of 1850 mm? and its modulus of elasticity is 12 GPa. What is the normal stress in member AB? 40 kN 35 kN 20 kN D A B +1.5 m→ - 3 m - - 3 m · Select one: O a. 8.11 MPa b. 10.81 MPa с. 13.51 MPа d. 21.62 MPa
A steel truss structure is loaded as shown in Fig. 1. The truss members are made of A36 steel (f, = 36 ksi). All the members are made up of two 3.0"x5.0" (each) parallel flat bars. All the joints have bolt connection (pin connection), acting in double shear. The diameter of all the bolts is 3.0". Determine, •The average normal and shear stresses in bars AB, and Cl and the shear stress in pin H. •The average normal and shear strain in AB, and CI and shear strain in pin H (Given, E = 29x106 psi, G = 11x 106 psi) 4k 4k C IH or GH 8 ft A Pin H JT H 4k 6 @ 8 ft = 48 ft Fig. 1