The wheel is made from a 5-kg thin ring and two 2-kg slenderrods. If the torsional spring attached to the wheel's center hasa stiffness k = 2 N •m/rad, so that the torque on the centerof the wheel is M = (20) N • m, where 'e is in radians,determine the maximum angular velocity of the wheel if it isrotated two revolutions and then released from rest.HINT: USET, + XU1-2 = T;0,5 mw for the wheel is3.2 rad/sec14.1 rad/sec18.1 rad/sec6.04 rad/sec1.58 rad/sec34

According to the given information, we have the mass of the wheel is 5kg thin ring and 2 kg slender…

The wheel is made from a 5-kg thin ring and two 2-kg slender rods. If the torsional spring attached to the wheel's center has a stiffness k = 2N- m/rad, so that the torque on the center of the wheel is M = (28) N - m, where 'e is in radians, determine the maximum angular velocity of the wheel if it is rotated two revolutions and then released from rest. HINT: USE T + EU1-3 = T; 0,5 m - for the wheel is 3.2 rad/sec 14.1 rad/sec 18.1 rad/sec 6.04 rad/sec 1.58 rad/sec

The wheel is made from a 5-kg thin ring and two 2-kg slender rods. If the torsional spring attached to the wheel's center has a stiffness k = 2N- m/rad, so that the torque on the center of the wheel is M = (28) N - m, where 'e is in radians, determine the maximum angular velocity of the wheel if it is rotated two revolutions and then released from rest. HINT: USE T + EU1-3 = T; 0,5 m - for the wheel is 3.2 rad/sec 14.1 rad/sec 18.1 rad/sec 6.04 rad/sec 1.58 rad/sec

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The 18-kg rod AB is pin-connected at A and subjected to a couple moment of M =15 N- m The rod is released from rest when the spring is unstretched at 0 = 30°. As the rod rotates, the spring always remains horizontal, because of the roller support at C. (Figure 1) Determine the rod' s angular velocity, measured clockwise, at the instant 0 = 60°. Express your answer using three significant figures. Enter positive value if the angular velocity is clockwise and negative value if the angular velocity is counterclockwise. vec rad/s k = 40 N/m 0.75 m M = 15 N- m
- once answered correctly will UPVOTE!!
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A uniform slender rod of length L = 900 mm and mass m = 4 kg is suspended from a hinge at C. A horizontal force P of magnitude 75 N is applied at end B. A Ja B C P Determine the corresponding angular acceleration of the rod. The corresponding angular acceleration of the rod is rad/s² O.
The 2.28-kg uniform slender bar rotates freely about a horizontal axis through O. The system is released from rest when it is in the horizontal position 0 = 0 where the spring is unstretched. If the bar is observed to momentarily stop in the position 0 = 66°, determine the spring constant k. For your computed value of k, what is magnitude of the angular velocity of the bar when 0 = 48°. B 0.85 m 0.85 m 2.28 kg 0.29 my Answers: k = i N/m ω- rad/s 1
The slender 12-kg bar has a clockwise angular velocity of w = 2 rad/s when it is in the position shown Suppose that L = 2.9 m. (Figure 1) Figure 60⁰° 1 of 1 Part A Determine its angular acceleration, measured clockwise. Express your answer using three significant figures. Enter positive value if the angular acceleration is clockwise and negative value if the angular acceleration is counterclockwise. α = Submit Part B NA = Submit Part C 195| ΑΣΦ 41 Determine the magnitude of the normal reaction of the smooth surface A at this instant. Express your answer to three significant figures and include the appropriate units. NB = Submit Request Answer 0 μÅ Value Request Answer μA vec Value Request Answer Units Determine the magnitude of the normal reaction of the smooth surface B at this instant. Express your answer to three significant figures and include the appropriate units. 2 Units ? = ? rad/s² ?
The system is at rest with the spring unstretched when theta = 0. the 5.3 kg uniform slender bar is then given a slight clockwise nudge. The value of b is 0.45 m. (a) if the bar comes to momentary rest when the angle = 58, determine the spring constant k. (b) for the value k = 65 N/m, find the magnitude of the angular velocity of the bar when the angle = 38 degrees. a) k = 70.634 N/m
Q8
The 45-kg reel has a radius of gyration about its center O of ko = 220 mm. If it is released from rest, determine the total external work done to it when its center O has traveled 6.6 m down the smooth inclined plane (with angle = 35°). Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point, and proper SI unit. Take g = 9.81 m/s². 0.4 m 0.2 m²
The disk of radius r is confined to roll without slipping at A and B as shown in (Figure 1). Figure A 2v 1 of 1 Part A If the plates have the velocities shown, determine the angular velocity of the disk. Express your answer in terms of some, all, or none of the variables r and v. Enter positive value if the angular velocity is counterclockwise and negative value if the angular velocity is clockwise. Submit VE ΑΣΦ | 11 | vec Provide Feedback Request Answer ? Next >
If the operator initially pushes the pedals at 20 rev/min and then initiates an angular acceleration of 6 rev/min2, determine the angular speed of the flywheel F (in rev/min) after the pedal has rotated 2 revolutions. Note that the pedal arm is connected to the chain plate A, which, when turning, drives the tethered pulley B through a coupling gear D. The belt wraps around the tethered pulley and then drives pulley E and the fixed flywheel. . B D "A = 125 mm "D = 20 mm "B = 175 mm "E = 30 mm F
Please and thank