The two bars are used to support load P. When unloaded, joint B has coordinates (0, 0). After load P is applied, joint B moves to the coordinate position (-0.56 in., -0.14 in.). Assume a = 19 ft, b = 38 ft, c = 13 ft, and d = 26 ft. Determine the normal strain in each bar

The two bars are used to support load P. When unloaded, joint B has coordinates (0, 0). After load P is applied, joint B moves to the coordinate position (-0.56 in., -0.14 in.). Assume a = 19 ft, b = 38 ft, c = 13 ft, and d = 26 ft. Determine the normal strain in each bar

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

If the allowable bearing stress for the material under the supports at A and B is Ob = 780 psi, determine the maximum load Pmax that can be applied to the beam. The bearing plates each have square cross sections of 5 in. by 5 in. The reactions at the supports are vertical. Assume w = 600 lb/ft, a = 12 ft, and b = 6 ft. Answer: Pmax= i W a B b lb P
1. We have a truss structure with a hinge on the left and a roller on the right. (Use method of moments ONLY for finding the members and use the numbered name only for each member) 30.00" a) Find the force acting on members 2, 3, 7, 9, 14, 15. (Indicate Compression or Tension) b) Determine the normal stress @ members 2, 3, 7, 9. (Use figure 2 for cross-sectional area) P/2 30.00" T IP 30.00" T Figure 1 30.00" P/2 30.00" P/2 10.00" 20.00" 2.00" 0.20" Figure 2 0.20" 2.00" 0.20"!
Determine the forces in members BC and CG. The forces are positive if in tension, negative if in compression. Α' 28 kips Answers: BC = i B 12' G CG = i 11' 12' C 12' D F 66° E kips kips
1. We have a truss structure with a hinge on the left and a roller on the right. (Use method of moments ONLY for finding the members and use the numbered name only for each member) 30.00" a) Find the force acting on members 2, 3, 7, 9, 14, 15. (Indicate Compression or Tension) b) Determine the normal stress @ members 2, 3, 7, 9. (Use figure 2 for cross-sectional area) P/2 30.00" D foo 30.00" Figure 1 30.00" (10 N -30.00" P/2 P/2 10.00" 20.00" 2.00" 0.20" Figure 2 0.20" 2.00" 0.20"
3. The center post B of the assembly has an original length of 124.8 mm whereas posts A and C have a length of 125 mm. If the caps on the top and bottom can be considered rigid, determine the average normal stress in each post. The posts are made of aluminum and have a cross sectional area of 400 mm². Ea=70 GPa. Use the Force Method 100 mm -100 mm 800 kN/m 125 mm 800 kN/m
For the beam shown: 1. Draw the free-body diagram (FBD) and determine the reactions at the supports. 2. Determine the internal forces and draw their diagrams. 3. Design the beam using IPE shape. 4. Draw the stress diagram in the critical cross section. Data: F= 60 kNm, L = 1 m, 0 = 120 MPa. I IPE A F L #C L B
Consider a cantilevered beam which is made of two identical. rectangular sections, a force P is applied at free end. 11) if A and B are not clued together, determine the bending stress distribution at a-a cross section, draw o Chint: each section carries P/ and label the Tout at the outest fibers. * 0.5m a 12) if we weld the two A & B together along the member length. determine the bending stress distribution, draw and laber. m ✓ P=1kw A 181- дет B зст
A simple pin-connected truss is loaded and supported as shown. The truss is constructed from three aluminum members, each having a cross-sectional area of A = 1160 mm2. Assume a = 2.3 m, b = 6.8 m, and c = 2.8 m. If P = 50 kN and Q = 75 kN, determine the normal stress in each member. L. Answers: JAB OBC i i JAC= i P b MPa (C) MPa (T) MPa (T)
If the applied load "P" causes the point C to be displaced downward by oc=2.8 mm, determine the normal strain in members AC and BC. The unloaded lengths are LAC-290 mm and LBC=340 mm. A The strain for link AC is The strain for link BC is 60° 45° C P SC B
The two bars are used to support load P. When unloaded, joint B has coordinates (0,0). After load P is applied, joint B moves to the coordinate position (-0.65 in., -0.10 in.). Assume a = 20 ft, b = 40 ft, c = 14 ft, and d = 28 ft. Determine the normal strain in each bar. a b C (2) (1) Answer: EAB = i &BC= i P B με με d
The cross-section of the two wooden members is a rectangle with a = 120 mm and b 60. They are joined by a simple glued joint as shown. Knowing that P = 9 kN, determine the normal and shear stresses at the joint when (a) a = 30°, (b) a = 45°.
Determine the forces in members BC and CG. The forces are positive if in tension, negative if in compression. A 30 kips Answers: BC= CG= 10' i i B 10' C 10' D 12' 比 69° G SE E kips kips