The star-connected rotor has a standstill reactance and resistance of 2.0 N and 0.4 N per phase respectively. Determine: (a) the full-load torque if the full-load speed is 1,425 r.p.m., (b) ratio of starting torque to full-load torque, and (c) the additional rotor resistance required to give maximum torque at standstill.

The star-connected rotor has a standstill reactance and resistance of 2.0 N and 0.4 N per phase respectively. Determine: (a) the full-load torque if the full-load speed is 1,425 r.p.m., (b) ratio of starting torque to full-load torque, and (c) the additional rotor resistance required to give maximum torque at standstill.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Help please and explanation if possible...TIA A 48 V, DC shunt motor delivers power to a load at 1200 r/min. The armature circuit resistance of the motor is 0.2 Ω and the field resistance is 60 Ω. The line current is 8 A. Assume no rotational losses. What is the value of the load torque in N·m?
1. In order to have sparkless commutation, the brushes should be placed along... 2. D.C. series motor are used in those applications where.. required. 3. The self-induction of a coil undergoing commutation causes . . at the brushes. ...starting torque is 4. The back e.m.f. in a d.c. motor . . the applied voltage and when it is equal to .. applied voltage the mechanical power will be maximized. 5. The deciding factor in the selection of a d.c. motor for a particular application is its characteristic.
1) A long-shunt generator running at 1000 rpm supplies 22 kW at a terminal voltage of 220 V The resistances of armature, shunt field and the series field are 0.052, 1102 and 0.06 ) respectively. The overall efficiency at the above load is 88%, Find (a) Cu losses (b) iron and friction losses (c) the torque exerted by the prime moyer.
A 10-pole lap-wound generator is rated at 120 V, 500 A, and 750 rpm. The armature has 163 slots with 4coil sides per slot and 2 turns per coi1. The hot winding resistance is 7.2 mQ, and the brush contact drop is 1.5 V.a. Find the rated load power, the developed torque, and the flux per pole; also find the per coil and per turn resistances and emfs.b. The armature coils are reconnected to form a simple wave winding with the speed and flux per pole unchanged. Find the new machine ratings. (current, voltage, power)d. For both lap and wave connections, find the average voltage between adjacent .commutator segments
Calaulate.- 14. In a certain 8-pole, 50-Hz machine, the rotor resistance per phase is 0.04 Q and the maximum torque occurs at a speed of 645 r.p.m. Assuming that the air-gap flux is constant at all loads, determine the percentage of maximum torque (a) at starting (b) when the slip is 3%.
A 3-phase 50 Hz I.M. has a rated torque = 16.7 N.M and maximum torque = 40.5 N.M. If its rated speed = 910 R.P.M, the :speed at maximum torque will be %3D R.P.M 578.28O R.P.M 421.640 R.P.M 590.160 None O
Q2: A single-phase induction motor with a 4-pole, 50-Hz, 130-V, is rotating in the clockwise direction at a speed of 1450 rpm. Determine its per-unit slip (a) in the direction of rotation and (b) in the opposite direction. At standstill the rotor resistance is 15 Q, determine the effective rotor resistance in each branch.
A four-pole, three-phase induction motor drives a turbine load. At a certain operatingpoint the machine has 4 percent slip and 87 percent efficiency. The motor drives aturbine with torque–speed characteristic given by TL = 20 + 0.006ω2,where TL is theload torque at the shaft. Determine:(1) the torque at the motor-turbine shaft.(2) the total power delivered to the turbine.(3) the total power consumed by the motor.
A 4 pole, 220V dc shunt motor takes 32A from the supply mains and develops a power of 5.6KW in its armature. The field winding and armature resistances are 220ohms and 0.09ohm respectively. It has 540 lap wound conductors. If the flux per pole is 30mWb, calculate the torque developed in lb-ft.
3. A4-pole, 50-Hz induction motor has a full-load slip of 5%. Each rotor phase has a resistance of O.3 Q and a standstill reactance of 1.2 2. Find the ratio of maximum torque to full-load torque and the speed at which maximum torque occurs. [2.6 ; 1125 r.p.m.]
Answer should written on paper and answer both subparts please
SOLVE THE PROBLEM, SHOW YOUR COMPLETE SOLUTION AND MAKE SURE THAT THE FINALS ANSWERS ARE IN 4 DECIMAL PLACES. 1. A 20-KW long compound DC generator is rated 240 V. It has a full load efficiency of 78% and stray power loss of 1600 watts. The shunt field and series field resistances are 110 ohms and 0.08 ohm respectively. Find the armature resistance, efficiency at maximum and the load current corresponding to maximum efficiency.