The specimen shown has been cut from a -in.-thick sheet o vinyl (E = 0.45 x 10 psi) and is subjected to a 350-lb tensile load Determine (a) the total deformation of the specimen, (b) the Heformation of its central portion BC. B 0.4 in. C D P = 350 lb P = 350 lb 1 in. -1.6 in.-- -1.6 in.--2 in. 1 in. 1.6 in.-

The specimen shown has been cut from a -in.-thick sheet o vinyl (E = 0.45 x 10 psi) and is subjected to a 350-lb tensile load Determine (a) the total deformation of the specimen, (b) the Heformation of its central portion BC. B 0.4 in. C D P = 350 lb P = 350 lb 1 in. -1.6 in.-- -1.6 in.--2 in. 1 in. 1.6 in.-

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A steel specimen is tested in tension. The specimen is 25 mm wide by 12.5 mm thick in the test region. By monitoring the load dial of the testing machine, it was found that the specimen yielded at a load of 160 kN and fractured at 214 kN. a. Determine the tensile stress at yield and at fracture. b. If the original gauge length was 100 mm, estimate the gauge length when the specimen is stressed to 1/2 the yield stress.
A steel specimen is tested in tension. The specimen is 2 in. wide by 2.3 in. thick in the test region. By monitoring the load dial of the testing machine, it was found that the specimen yielded at a load of 30 kips and fractured at 40 kips. a) Determine the tensile stress at yield and fracture; b) If the original gauge length was 4 in., estimate the gauge length when the specimen is stressed to 2 the yield stress.
Show Stress/ strain curve for nitinol and steel (2 separate charts please)
7) A specimen of steel 20 mm diameter with a gauge length of 200 mm is tested to destruction. It has an extension of 0.25 mm under a load of 80 kN and the load at elastic limit is 102 kN. The maximum load is 130 kN. The total extension at fracture is 56 mm and diameter at neck is 15 mm. Find (i) The stress at elastic limit. (ii) Young's modulus. (iii) Percentage elongation. (iv) Percentage reduction in area. (v) Ultimate tensile stress.
Given: metal specimen x-section (circular) = 0.5sin Gaye length Fractured final final diameter Determine ^ = 2.030 In occured at 28, 500 # length = 2.30in dia = 0.43 in al Ultimate b7 Elongation c) Reduction tensile stress in ksi a percentage as of x-section area as a percentage