Q3) (8plates that are welded at the seams in the orientation shown. The tank has an inside diameter of400 mm and a wall thickness of 5 mm. If the gage pressure is 4 MPa, using Mohr's circle,determine the normal stress perpendicular to the weld and shear stress parallel to the weld.The pressure tank shown in Figure is fabricated from spirally wrapped metal50°

Given P=4MPa d=400mm t=5mm angle Q=50o C

The pressure tank shown in Figure is fabricated from spirally wrapped me plates that are welded at the seams in the orientation shown. The tank has an inside diameter 400 mm and a wall thickness of 5 mm. If the gage pressure is 4 MPa, using Mohr's cir determine the normal stress perpendicular to the weld and shear stress parallel to the weld.

The pressure tank shown in Figure is fabricated from spirally wrapped me plates that are welded at the seams in the orientation shown. The tank has an inside diameter 400 mm and a wall thickness of 5 mm. If the gage pressure is 4 MPa, using Mohr's cir determine the normal stress perpendicular to the weld and shear stress parallel to the weld.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure shows a roof truss and the detail of the riveted connection at joint B. Using allowable stresses of τ= 70 MPa and σb= 140 MPa, how many 22-mm diameter rivets are required to fasten member BC to the gusset plate? Member BE? What is the largest average tensile or compressive stress in BC and BE? Say ABC = 864mm2; ABE = 1780mm2.
B=55⁰ inside diameter = 28.6in. wall thickness=0.35 in. allowable normal stress perpendicular to the weld = 18 ksi allowable shear stress parallel to the weld =8 ksi What is the largest gage pressure inside the tank? Answer in psi rounded-off to 3 decimal places K
A rectangular plate (0 =23°) is formed by welding two triangular plates shown in figure. The plate is subjected to a compressive stress of 2.3 MPa in the x-direction and a tensile stress of 13 MPa in the y-direction. Determine the normal and the shear stresses acting parallel to the weld. Weld Lütfen birini seçin: a. 10.664 MPa/5.50 MPa b. 0.3131 MPa/4.93 MPa c. None d. 0.0358 MPa/5.50 MPa e. 9.3175 MPa/6.09 MPa
For the hollow built-in pipe with an inner diameter of 48 mm and an outer diameter of 60 mm, the forces given in the figure were applied. Calculate the stresses at point A by reducing the applied forces to point B, then to the cross section at A and show them on the stress element.
please do not round it off until the final answer
Steel machine element at the critical section is in biaxial stress state with two principal stress being 300 N/mm2 and 300 N/mm² (equal magnitude). Find the von Mises stress (in N/mm²) in the member
The pressure tank is fabricated from spirally wrapped metal plates that are welded at the seams in the orientation shown. The tank has an inside diameter of 700 mm and a wall thickness of 8.9 mm. For a gage pressure of 1.27 MPa, determine (a) the normal stress perpendicular to the weld (use positive for tension, negative for compression) and (b) the shear stress (absolute value) parallel to the weld. Assume = 51. s Answers: (a) Normal stress= (b) Shear stress - MPa MPa
Find the stress acting on the surface of a thin sphere of diameter 15 cm, thickness 0.25 cm and the internal pressure is 2 MPa
Mohr's circle is shown for a point in a physical object that is subjected to plane stress. Each grid square is 1 MPa in size. (a) Determine the stresses o, o, and the magnitude of Tyand show them on a stress element. (b) Determine the stresses o,, Og and the magnitude of Tht and show them on a stress element that is properly rotated with respect to thex-y element. The sketch must include the magnitude of the angle between thexand n axes and an indication of the rotation direction (i.e., either clockwise or counterclockwise). Answer: (a) Ox= MPа MPa Oy= MPa Txy = (b) On= MPa MPa Ot = MPa Tnt =
A 50 inches diameter storage tank is used to store air at an internal pressure of 625 psi with a FS = 4.5 based on ultimate strength. If the welded joints have a joint strength efficiency of 80% and the steel used to create the tank hasan equivalent strength similar to C1118,a. find a suitable plate thickness of the tank. Compare the stresses for both diametral section and longitudinal sectionb. Using the thickness solved in (a), determine the pressure to cause actual failure to the vessel