The olive oil is flowing between the two parallel plates which has 0.072 m diameter.The lower and upper plates are being pulled at a relative velocity of 0.45 m/s and 0.13m/s. The olive oil viscosity is 3.2x10-2 Pa-s at 323 °K. Calculate the shear stress and theshear rate for olive oil. If soybean oil having a viscosity of 1.123 kg/m.s was usedinstead of olive oil, what would be the new relative velocity in m/s?

Given data:-distance between two plates, D=0.072mviscosity of olive oil,…

The olive oil is flowing between the two parallel plates which has 0.072 m diameter. The lower and upper plates are being pulled at a relative velocity of 0.45 m/s and 0.13 m/s. The olive oil viscosity is 3.2x10? Pa-s at 323 °K. Calculate the shear stress and the shear rate for olive oil. If soybean oil having a viscosity of 1.123 kg/m.s was used instead of olive oil, what would be the new relative velocity in m/s?

The olive oil is flowing between the two parallel plates which has 0.072 m diameter. The lower and upper plates are being pulled at a relative velocity of 0.45 m/s and 0.13 m/s. The olive oil viscosity is 3.2x10? Pa-s at 323 °K. Calculate the shear stress and the shear rate for olive oil. If soybean oil having a viscosity of 1.123 kg/m.s was used instead of olive oil, what would be the new relative velocity in m/s?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

M5
The viscosity of a fluid placed in a gap of two cylinders is measured with the apparatus given in the figure. The diameter of the inner cylinder rotating at 300 revolutions per minute is 20 cm and its height is 90 cm. The distance between the two cylinders is 1 mm. Find the dynamic viscosity of the fluid as the moment applied to the rotating cylinder is measured as 2Nm. The friction on the lower surface of the rotating roller is neglected.
Calculate the velocity of water flowing in a tube with Reynolds number 4500 and the diameter of the pipe is 12 mm. Take dynamic viscosity of water is 1.14x10-3 Ns/m². Velocity in mm/s
Crude Oil is flowing through a circular pipe with a centerline velocity of 0.5m/s at a temperature of 60 degrees Celcius and viscosity of 5.5 mPa s. Determine the shear stress at the pipe surface if a parabolic velocity distribution is assumed. Also, indicate the kinematic viscosity of the crude oil at the given temperature. The density of the crude oil is 855 km/m^3 and the pipe diameter is 20 mm.
2. Dynamic viscosity of the fluid is u = 8.0×10² Pa · S , flow along the flat, the velocity gradient isdu dy 10³1/s shear stress is ( ). А, 0.1Pа В, 0.8Ра С, 80Ра D, 100Pa.
In the landing gear for the Airbus 320, engineers wish to design a damper (a device for reducingvibrations) consists of a metal plate 1mm thick moving centrally between two large plates. The gapsbetween the plate sides and side walls are both equal to 1mm. The area of the central plate is 4x10-4m2, and the damper is filled with liquid having a dynamic viscosity of 7.63poise. Calculate thedamping force on the central plate if the later moves at a velocity of 0.7m/s
Problem 1 – A laminar flow fluid of known density (ρ) and viscosity (μ) flows between twoparallel plates with different velocities in the same direction. The top plate has a velocity Utop inthe positive x direction. The bottom plate has a velocity Ubot in the positive x direction. The twoplates are a distance of “a” apart. There is a pressure gradient in the x direction ( ). Derivean expression of the velocity and shear stress profiles between the two plates
In mechanical fluid
i need the answer quickly