The fuel inputs per hour of plants 1 and 2 are given asF1 = 0.2 P1 2 + 40 P1+ 120 OMR per hrF2 = 0.25 P2 2 + 30 P2 + 150 OMR per hrDetermine the economic operating schedule and the corresponding cost of generation if thenaximum and minimum loading on each unit is 100 MW and 25 MW, the demand is 160 MW, andtransmission losses are neglected. If the load is equally shared by both the units, determine thesaving obtained by loading the units as per equal incremental production cost.

Fuel inputs per hour of plants 1 and plants2. Find the power of each plants for economic load…

The fuel inputs per hour of plants 1 and 2 are given as F1 = 0.2 P1 2+ 40 P1 + 120 OMR per hr F2 = 0.25 P2 2 + 30 P2 + 150 OMR per hr Determine the economic operating schedule and the corresponding cost of generation if the naximum and minimum loading on each unit is 100 MWw and 25 MW, the demand is 160 MW, and transmission losses are neglected. If the load is equally shared by both the units, determine the saving obtained by loading the units as per equal incremental production cost.

The fuel inputs per hour of plants 1 and 2 are given as F1 = 0.2 P1 2+ 40 P1 + 120 OMR per hr F2 = 0.25 P2 2 + 30 P2 + 150 OMR per hr Determine the economic operating schedule and the corresponding cost of generation if the naximum and minimum loading on each unit is 100 MWw and 25 MW, the demand is 160 MW, and transmission losses are neglected. If the load is equally shared by both the units, determine the saving obtained by loading the units as per equal incremental production cost.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.31P: Consider two interconnected voltage sources connected by a line of impedance Z=jX, as shown in...

See similar textbooks

Related questions

Q: The maximum demand of a power station is 110 MW. It generates 105 x 10 units during the day. The…

Q: 7.8. The fuel-cost functions in $/h for three thermal plants are given by C₁ = 350 +7.20P₁ +0.0040P²…

Q: Assume that there are two primary feeders supplied by a transformer T1. One of the feeders supplies…

A: We know, Diversity Factor=Maximum noncoincident demandmaximum diversified demandThe maximum…

Q: Q2/A: A 100 MW power station delivers 100 MW for 2 hours, 50 MW for 6 hours and is shut down for the…

A: The energy produced by the power station each day can be calculated by multiplying the power output…

Q: a. prove that the circulating current value decrease with the increase in the load between the tv…

Q: A generation station has maximum demand of 10,000KW, the daily demand as following, calculate the…

A: "Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: 2. Find the economic dispatch for a total demand of 450MW system with three thermal units described…

A: Given: Total demand PD=450 MW,Previous solution of Economic load dispatch ELD=500 MW,P1=229.686…

Q: The fuel inputs per hour of plants 1 and 2 are given as F1 = 0.2 P1 2 + 40 P1 + 120 OMR per hr F2 =…

A: Fuel input per hours of plant 1 and plant 2 given. Find the economic operating schedule and cost.…

Q: Draw the per-unit reactance diagram of the system shown in Figure Q1. Assumed base values are 100…

Question

The fuel inputs per hour of plants 1 and 2 are given as
F1 = 0.2 P1 2 + 40 P1+ 120 OMR per hr
F2 = 0.25 P2 2 + 30 P2 + 150 OMR per hr
Determine the economic operating schedule and the corresponding cost of generation if the
naximum and minimum loading on each unit is 100 MW and 25 MW, the demand is 160 MW, and
transmission losses are neglected. If the load is equally shared by both the units, determine the
saving obtained by loading the units as per equal incremental production cost.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

2. a) Explain the terms load factor and diversity factor. b) Discuss the advantages of interconnected grid system. c) A generating station is to supply four regions of load whose peak loads are 10 MW, 5 MW, 8 MW and 7 MW. The diversity factor at the station is 1-5 and the average annual load factor is 60%. Calculate: (i) the maximum demand on the station, (ii) annual energy supplied by the station and (iii) suggest the installed capacity and the number of units.
Id is : 510221
A generation station of 3 MW supply a two region A & B .The load variation of these regions is as follow: Region A (Time) From midnight from 4a.m to From 10a.m to From 5p.m to to 4a.m 10a.m 5p.m 7p.m From 7p.m to midnight Load(kw) 800 500 NO load 300 100 Region B (Time) From From From From From midnight 6a.m to 2p.m to 4p.m to 9p.m to Load(kw) to 6a.m 300 2p.m 4p.m 9p.m midnight 600 No load 800 1100 With neglect transmission line losses. Find the load factor, diversity factor, reserve capacity,plant use factor.
I need help from an expert on how to draw a load curve, as there are two periods A and B with different loads and times. I need a detailed explanation of this process because it is difficult. Q1. A generation station of 3 MW supply a two regions A & B The line losses are neglected and the load variation of these regions is as follow: Region A (Time) From midnight to 5 a.m No-load From 8 a.m to From 5 am to Load (kw) 8 a.m 1200 11 a.m 800 Region B From From From (Time) midnight to 6 a.m to p.m to Load (kw) 6 a.m 400 3 p.m 7 p.m 900 No-load 1-Plot The daily load curve of the total system. From 11 a.m to 6p.m No-load From From 6 p.m to midnight 600 From 7 p.m to 9 p.m to 9 p.m midnight 1800 200
Q20. The section bus-bars A and B as shown in Figure B5 are linked by a bus-bar reactors each rated at 5000 kVA with 10% reactance. On bus-bar A, there are two generators each of 10,000 kVA with 10% reactance and on B two generators each of 8000 kVA with 12 % reactance. Find the Current and MVA that fed into a dead short circuit between all phases on B with bus-bar reactor in the circuit. Page 4 of 5 جامعة التقنية والعلومر التطبيقية بإبراء University of Technology and Applied Sciences - Ibra Student ID: Section: Student Name: 8,000 kVA 12% 10,000 kVA 10,000 kVA 10% 8,000 kVA 12% 10% 2 3 5,000 kVA 10% lell 8,000 kVA 10% Figure B5 "End of Question Paper"
two generators supplying a load. Generator I has a no-load frequency of 62.5 Hz and a slope Sp1 of I MW/Hz. Generator 2 has a no-load frequency of 62.0 Hz and a slope sp2 of I MW/Hz. The two generators are supplying a real load totaling 2.5 MW at 0.8 PF lagging. (a) At what frequency is this system operating, and how much power is supplied by each of the two generators? (b) Suppose an additional I-MW load were attached to this power system. What would the new system frequency be, and how much power would Gl and G2 supply now? Generator 1 VT V2 Generator 2 VTí KVAR KVAR
Two turbo alternators rated for 140 MW and 260 MW have gov ernor drop characteristics of 5% from no load to full load. They are connected in parallel to share a load of 250 MW. Determine the load shared by each machine suming free governing action.
Two generators are supplying a load. Both the generators have a no-load frequency of61.5 Hz and the slope sp of 1 MW/HZ. If they are supplying a real load of 2.0 MW at 0.8 pflagging, what would be the system frequency and power sharing between two generators?What measures can be taken to make the frequency 60 HZ. If an additional 1.0 MW load isconnected to the existing one what would the system frequency be.
High voltage engineering subject
Hoover Dam has a nameplate capacity of 2080 MW[] and an annual generation averaging 4.2 TW·h. (The annual generation has varied between a high of 10.348 TW·h in 1984, and a low of 2.648 TW·h in 1956.) Determine the capacity factor. Ans. 23% (Show the Solutions)
A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and L=40mH. (a) Determine the power factor of the circuit and state whether it is lagging or leading. (b) Determine the real and reactive power absorbed by the load. (c) Calculate the peak magnetic energy Wint stored in the inductor by using the expression Wint=L(Irms)2 and check whether the reactive power Q=Wint is satisfied. (Note: The instantaneous magnetic energy storage fluctuates between zero and the peak energy. This energy must be sent twice each cycle to the load from the source by means of reactive power flows.)
5-25 Electric power is to be generated by installing a hydraulic turbine-generator at a site 110 m below the free sur- face of a large water reservoir that can supply water steadily at a rate of 900 kg/s. If the mechanical power output of the turbine is 800 kW and the electric power generation is 750 kW, determine the turbine efficiency and the combined turbine- generator efficiency of this plant. Neglect losses in the pipes.