the following with (True) or (False): 1- The head loss in box culverts varied linearly with the Manning coefficient. 2- In the sliding gate design, the plate considered as a beam simply supported on tow wall. 3- The total head in open flow is equal to velocity head added to specific energy. 4- The head losses in the syphon decreased with increasing of bend angle. 5- In the floor design, Bligh method is most economic method.

the following with (True) or (False): 1- The head loss in box culverts varied linearly with the Manning coefficient. 2- In the sliding gate design, the plate considered as a beam simply supported on tow wall. 3- The total head in open flow is equal to velocity head added to specific energy. 4- The head losses in the syphon decreased with increasing of bend angle. 5- In the floor design, Bligh method is most economic method.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

24. A galvanized steel pipeline conveys ethyl alcohol at a rate of 0.04 m/s. Determine the optimum economic pipe size for the installation given that: C2 = $0.05/kWh C, = $1100/mn+1 t = 6000 hr/yr F = 6.75 n = 1.2 a = 1/10 0.10 b = 0.01 1 = 0.75 40fm®C,t n(a + b)(1 + F)C,na²p² n+5 Dogt
1. A water tube boiler operates at 1100 psia has the following characteristics: No. of riser 100 Riser wall thickness 0.22 in OD of riser Length 3in 105 ft No. of 90° Bends 6 14 lb water / lb steam 1200 lb steam / hr-tube Circulation Ratio Steam per tube No. of Down Comer 1 Length of Down Comer 75 ft No. of 90° Bends 2 Calculate: a. The mean density b. Diameter of the Down-Comer for a 80 ft system height.
As a junior field engineer, you have been asked to assist a contractor in resolving the following problem. A 4.9 kW motor and gear drive rated at 175 rpm has been shipped with the four impeller blades listed below. The baffled rapid mix tank to which one of the impellers will be installed is 3.0 m² in volume (1.56 m diameter and 1.56 m depth). Assume water temperature of 10C, G= 1000s, water density = 1000 kg/m³, and motor power to water power transfer efficiency of 80%. Impeller options: A. Axial flow, 3 blades, diameter = 0.48 m, N₁-1.0 B. Axial flow, 3 blades, diameter = 0.61 m, Np=1.0 C. Radial flow, 6 blades, diameter = 0.48 m, Np=6.3 D. Radial flow, 6 blades, diameter = 0.61 m, Np 6.3 Answer the following: 3. What is the rotational speed (n) in rps? b. What is the power required in kW for impeller option A? What is the power required in kW for impeller option C? C. d. What is the power transferred to the water from the selected motor in kW? e. Which impeller should be used?…
A single acting, twin cylinder, Ammonia compressor with bore equal to stroke is driven by an engine at 250 rpm. The machine is installed in a chilling plant to produce 700 kW of refrigeration at -18°C evaporating temperature. At this temperature the cooling effect per kg mass is 1160 kJ. The specific volume of vapor entering the compressor is 0.592 m³ per kilogram. Assume 85% volumetric efficiency, determine the bore in mm. A. 400 mm С. 450 mm В. 300 mm D. 500 mm
35. The intcrnal and external diameters of an inward flow reaction turbine are 0 6 metre and 1 metre respectively. The width of the wheel at inlet and outlet is 12 cms. is 9 metres and the hydraulic efficiency is 90%. The vane angle at outlet is 20°. The final discharge at outlet is radial at a velocity of 2 70 metres per second. Find (a) The guide blade angle. The head on the turbinc (6) The runner vane angle at inlet. (c) The speed of the turbine. (d) The discharge of the turbine. (e) The WHP. (14° 8' ; 164° 43'; 236 rpm; 66 hp)
QUESTION 02 An inward flow reaction turbine has an overall efficiency of 80% and is required to develop 150 Kw of power. The available head is 8 m. The Peripheral velocity of the wheel = 0.36/2gH ; Radial velocity of flow = 0.96/2gH . Speed = 150 rpm. %3D %3D %3D Hydraulic losses = 22% of available energy. Assuming radial discharge, determine: 2.1) Guide blade angle at inlet. 2.2) Vane angle at outlet. 2.3) Diameter of wheel. 2.4) Width of wheel at inlet.
It is desired to construct a hydraulic turbine for a hydraulic power plant to operate under the following conditions: discharge Q = 3.5 m3/s of water, the available net head = 290 meters, the hydraulic efficiency = 0.8, the rotating speed = 300 rpm. A Pelton wheel impulse turbine was selected with the following specifications: the bucket angle b2 = 160°, the coefficient of velocity for the nozzle is 0.98 and assume the friction coefficient k = 0.2. Determine the following:Jet Diameter to Wheel diameter ratio, dj/Dw. The Specific Speed in M.K.S., Ns.The computed head coefficient ϕ.The brake horsepower. The required number of Jets. The Pelton wheel diameter in meters.
(1) Inlet sudden contraction H Valve (2) Sudden expansion Bends Find out the following? Case 1: Major Losses only Exit H = Case 1: Minor Losses only, H = Case 3: Major & Minor Losses H =
A pump, for which the characteristic curve is shown below, is used to pump water from a canal into a dam. The pump is mounted 2.0 m above the water level. There is a 50 mm PVC pipe connected to the suction side of the pump, and a 40 mm PVC pipe connected to the discharge side. The total length of pipe on the suction side is 8 m, and there is a strainer (K = 20), a non-return valve, a 90° elbow and a fully open gate ball valve in the suction line. Another fully open gate valve, and two 90° elbows are mounted in the discharge line. The total length of the discharge line is 60 m, and the discharge pipe outlet is 4 m above the pump. You may assume a water temperature of 25 °C. Determine: (a) The flow rate through the system(b) The required fluid power(c) The efficiency of the pump(d) Whether the pump will cavitate or not.
Homework 9- Determine the total energy production of a run-of-river plant having an total efficiency of 85%. It receives flow by means of a penstock, 400m long with 1.2m diameter, and f=0.015 in Darcy-Weisbach equation. The available head is 200m and seasonal fluctuations of upstream and downstream water levels are ignored. The flow duration data are tabulated as below. Q (m/s) Duration, 100 t (%) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 95 80 65 55 40 35 25 20 10
Given: Rotor dia. = 4m; Power coefficient, Cp = 0.35; Ave. wind speed = 6 m/s; Air density = 0.124 kgs^2/m^4; Generator efficiency = 90%. Solve for the 1) Swept Area, 2) Density of Air in kg/m^3, 3) Output power of the windmill, and 4) Available power of the windmill.
It is a torsional parameter equal to twice the product of the area enclosed by the centerline of the tube and the shear flow. a. Torsional stress b. Torque c. Angle of Twist d. Modulus of rigidity