The figure shows (in cross section) a wall consisting of four layers, with thermal conductivities k₁ = 0.0645 W/m-K,K3 = 0.0406 W/m-K and k4 = 0.110 W/m-K (k₂ is unknown). The layer thicknesses are L₁ = 1.77 cm,L3 = 2.75 cm and L4 = 3.68 cm(L2 is unknown). The known temperatures are T₁ = 30.6 °C, T12 = 26.8 °C and T4 = -14.6 °C. Energy transfer through the wall is steady. What is interface temperature T34? Number i T₁ ky T12 k₂ Units T23 k₂ ₁+²+ T34

The figure shows (in cross section) a wall consisting of four layers, with thermal conductivities k₁ = 0.0645 W/m-K,K3 = 0.0406 W/m-K and k4 = 0.110 W/m-K (k₂ is unknown). The layer thicknesses are L₁ = 1.77 cm,L3 = 2.75 cm and L4 = 3.68 cm(L2 is unknown). The known temperatures are T₁ = 30.6 °C, T12 = 26.8 °C and T4 = -14.6 °C. Energy transfer through the wall is steady. What is interface temperature T34? Number i T₁ ky T12 k₂ Units T23 k₂ ₁+²+ T34

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The figure shows the cross section of a wall made of three layers. The thicknesses of the layers are L1, L2 =0.650 L1, and L3 = 0.350 L1. The thermal conductivities are k1, k2 = 0.900 k1, and kg = 0.600 k1. The temperatures at the left and right sides of the wall are TH = 30 °C and Tc= -20 °C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.180 kg, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT2? k1 ko k3 TH TC L1 L2 L3 (a) AT2 = i (b) (c) AT2 = i
Liquid helium is stored at its boiling-point temperature of 4.2 K in a spherical container (r = 0.30 m). The container is a perfect blackbody radiator. The container is surrounded by a spherical shield whose temperature is 91 K. A vacuum exists in the space between the container and the shield. The latent heat of vaporization for helium is 2.1 × 104 J/kg. What mass of liquid helium boils away through a venting valve in one hour?
An iron bar is held between a fire at fixed temperature, T1 = 444 C and the other end is embedded into a block of ice of mass m = 0.478 kg at 0 C. The latent heat of fusion of ice is 334 kJ/kg. The thermal conductivity of metallic iron is 80 W/m-K. The length of the bar is /= 2.2 m and it has a width of w = 0.203 m and height of h = 0.119 m. The density of iron is 7.874 kg/m^3. The specific heat capacity of iron is 0.44 kJ/kg-K and the specific heat capacity of water is 4.182 kJ/kg-K. a) At t=0, what is the power (J/s) of heat transfer across the bar? b) If T1 is held constant, how long does it take to melt the entire block of ice? c) Suppose now that as soon as all of the ice has melted the water is put into an insulating container. The iron bar is now heated completely to T1 and dropped, cheerfully and with reckless abandon, into the container. What is the final temperature of the system?
An incandescent light bulb has a tungsten filament that is heated to a temperature of 3.20 × 103 K when an electric current passes through it. If the surface area of the filament is approximately 1.00 × 10−4 m2 and it has an emissivity of 0.360, what is the power radiated by the bulb?The Stefan–Boltzmann constant (σ) is 5.670 × 10−8 W/(m2·K4).
An aluminum bar has a cross-section that is 5.07 cm by 6.38 cm and is 1.53 m long. Aluminum has a thermal conductivity of 205 W/m K. If the aluminum bar is used to bridge between ice at 0 °C and boiling water at 100 °C, what is the rate of heat transfer (in W) along the bar?
An aluminum bar has a cross-section that is 4.37 cm by 6.87 cm and is 2.3 m long. Aluminum has a thermal conductivity of 205 W/m K. If the aluminum bar is used to bridge between ice at 0 °C and boiling water at 100 °C, what is the rate of heat transfer (in W) along the bar?
An aluminum bar has a cross-section that is 4.31 cm by 7.32 cm and is 2.38 m long. Aluminum has a thermal conductivity of 205 W/m K. If the aluminum bar is used to bridge between ice at 0 °C and boiling water at 100 °C, what is the rate of heat transfer (in W) along the bar?
The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about 0.20 W/m · K and 0.020 W/m · K respectively, while other tissues inside the body have conductivities of about 0.50 W/m · K. Assume that between the core region of the body and the skin surface lies a skin layer of 1.0 mm, fat layer of 0.50 cm, and 3.2 cm of other tissues. (a) Find the R-factor for each of these layers, and the equivalent R-factor for all layers taken together, retaining two digits. Rskin m2 · K/W Rfat m2 · K/W Rtissue m2 · K/W R m2 · K/W (b) Find the rate of energy loss when the core temperature is 37°C and the exterior temperature is 0°C. Assume that both a protective layer of clothing and an insulating layer of unmoving air are absent, and a body area of 2.0 m2. W
A 780 cm X 1320 cm house is built on a 12 cm thick concrete slab of thermal conductivity 0.68 W/m.K. If the ground temperature of the slab is 6.1°C while the interior of the house is 22.5°C.Calculate the following: a) The temperature difference in kelvin b) The temperature gradient (AT/Ax) in kelvin/metre c) The heat loss rate through the concrete slab in kilowatt
The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about 0.20 W/m · K and 0.020 W/m · K respectively, while other tissues inside the body have conductivities of about 0.50 W/m · K. Assume that between the core region of the body and the skin surface lies a skin layer of 1.0 mm, fat layer of 0.50 cm, and 3.2 cm of other tissues. (a) Find the R-factor for each of these layers, and the equivalent R-factor for all layers taken together, retaining two digits. Rskin m2 · K/W Rfat m2 · K/W Rtissue m2 · K/W R m2 · K/W (b) Find the rate of energy loss when the core temperature is 37°C and the exterior temperature is 0°C. Assume that both a protective layer of clothing and an insulating layer of unmoving air are absent, and a body area of 2.0 m2. W
We performed the experiment to measure the thermal conductivity of 2 materials (Brass & Steel) in the laboratory and measured the following tabulated values: Material 1- BRASS (Diameter = 25mm) %3D Power Temperature (°C) Q' 1 (W) 2 3 4 5 8 14.8 78.9 77.4 76 50 46.6 42.4 36 34.4 33.5 Material 2 - STEEL (Diameter = 25mm) Power Temperature (°C) Q' (W) 1 2 3 7 8 9 14.35 88.5 87.4 85 33.9 33.7 32.4
A human body has a temperature of 30°C If its total surface area is 1.2 m2, what is the net rate of heat loss from the body by convection alone considering the surrounding temperature to be 24°C? Consider film coefficient to be h = 4.7 W/m2K.