The drawing depicts a copper loop lying flat on a table (not shown) and connected to a battery via a closed switch. The current / in the loop generates the magnetic field lines shown in the drawing. The switch is then opened and the current goes to zero. There are also two smaller conducting loops A and B lying flat on the table, but not connected to batteries. Determine the direction of the induced current in (a) loop A and (b) loop B. Specify the direction of each induced current to be clockwise or counterclockwise when viewed from above the table. Magnetic field lines Switch Copper loop

The drawing depicts a copper loop lying flat on a table (not shown) and connected to a battery via a closed switch. The current / in the loop generates the magnetic field lines shown in the drawing. The switch is then opened and the current goes to zero. There are also two smaller conducting loops A and B lying flat on the table, but not connected to batteries. Determine the direction of the induced current in (a) loop A and (b) loop B. Specify the direction of each induced current to be clockwise or counterclockwise when viewed from above the table. Magnetic field lines Switch Copper loop

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A coil of wire containing four circular loops with radius 0.4 m lies in the plane of the page. A uniform magnetic field points into the page, increasing from 0.4 T to 0.6 T in 0.2 s. Find the magnitude and direction of the emf generated in the coil.
Below is a closed conducting loop within a magnetic field (for direction see picture). The loop is a circle with a radius of r = 19.00 cm. The magnetic field is increasing in the direction shown at a rate of dB/dt = 169.0 mT/s. The circle wire has 150.0 loops around it. The wire has a total resistance of R = 3.30 Ohms.
Please give me correct answer and square the answer.
A loop of a wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.18 m. The normal to the plane of the loop is parallel to a constant magnetic field of magnitude 0.86 T. What is the magnitude of the change in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through half a revolution?
104 loops of wire lie in the plane of this page. A magnetic field pointing out of the page is increased from 0 → 4.5 T in 0.15 seconds. The loops each enclose an area of 1 m2. (a) What is the change in magnetic flux (∆ΦB) through one of the loops of wire in this time? (b) What is the induced voltage in the loops? (c) If the loops (combined) have a total resistance of 5 Ω, what will be the induced current in the loops? (d) In what direction will the induced current flow (clockwise or counterclockwise)?
Mindy, a medical device engineer, is designing an apparatus to monitor the breathing of a patient. The apparatus consists of a stretchable loop of conductive material wrapped in a small band around the patient's chest. A constant uniform external magnetic field is produced by a nearby solenoid. As the patient inhales, his chest expands, stretching the chest band. The resulting increase in the area of the loop causes an emf to be induced in the loop. By measuring the induced emf, a device user can estimate the patient's breathing rate. Mindy needs the apparatus to be able to detect a change in area as small as 5.50 cm? occuring over a time period of 1.50 s. If the minimum emf that can be reliably detected is 2.00 x 10-4 V, what is the magnitude of the minimum external magnetic field that would be needed from the solenoid? magnitude of minimum external magnetic field: T
A loop of wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.28 m. The normal to the plane of the loop is parallel to a constant magnetic field (p = 0°) of magnitude 0.82 T. What is the change AO in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through half a revolution? B (into paper) ΔΦ = i
A loop of wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.27 m. The normal to the plane of the loop is parallel to a constant magnetic field (φ = 0˚) of magnitude 0.87 T. What is the change ΔΦ in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through half a revolution?
A loop of wire has the shape shown in the drawing. The top part of the wire is bent into a semicircle of radius r = 0.22 m. The normal to the plane of the loop is parallel to a constant magnetic field (φ = 0˚) of magnitude 0.90 T. What is the change ΔΦ in the magnetic flux that passes through the loop when, starting with the position shown in the drawing, the semicircle is rotated through half a revolution?
A circular coil enclosing an area of 140 cm? is made of 210 turns of copper wire (shown in the figure below). The wire making up the coil has no resistance; the ends of the wire are connected across a 3.00-N resistor to form a closed circuit. Initially, a 1.20-T uniform magnetic field points perpendicularly upward through the plane of the coil. The direction of the field then reverses so that the final magnetic field has a magnitude of 1.20 T and points downward through the coil. If the time interval required for the field to reverse directions is 0.200 s, what is the average current in the coil during that time? R
Please Asap
A conducting bar of length moves to the right on two frictionless rails as shown in the figure below. A uniform magnetic field directed into the page has a magnitude of 0.310 T. Assume R = 8.70 and l = 0.340 m. l R * xxxxxx x x X x counterclockwise into the page out of the page x x x Bin (a) At what constant speed should the bar move to produce an 8.20-mA current in the resistor? m/s (b) What is the direction of the induced current? clockwise (c) At what rate is energy delivered to the resistor? mW