The combustion of a gaseous hydrocarbon containing only C and H produces a stack gas with Orsat analysis of 5.1% CO2, 0.8% CO, and 8.6% O2. What is the composition of water in the wet stack gas? How much % excess air is fed? What is the mole composition of the carbon in the feed?

Q: A fuel gas supplied analyzes 20% H2, 5% CO, 35% CH4, 10% C2H6, 20% C3H8, 10% N2. It is burned…

A: From the given fuel gas moles we will obtain the mole fraction of all complonets and moles.We will…

Q: Blue water gas (BWG) is obtained by passing steam over red hot carbon-enriched coal. The gas is…

A:

Q: Gaseous fuel composed of 65% carbon, 30% hydrogen and 5% oxygen saturated with water vapor is burned…

A:

Q: Carborundum is silicon carbide, SiC, a very hard material used as an abrasive on sandpaper and in…

A:

Q: 7. A liquid fuel composed of C 86%, H 12%, S 2% is combusted. After 100 kg of its combustion,…

A: Basis: 100 kg of liquid fuel and complete combustion It contains 86 kg C , 12 kg H and 2 kg of S…

Q: Example 4.2. HNO, and 8 wt% water, by mixing You are asked to make 1,000 kg of the mixed acid…

A:

Q: An iron-carbon alloy initially containing 0.255 wt% C is exposed to an oxygen-rich and virtually…

A: Given data: Initial concentration of C = 0.255 wt % Surface concentration = 0.0 wt % Temperature =…

Q: An iron-carbon alloy initially containing 0.200 wt% C is exposed to an oxygen-rich and virtually…

A: Given data:The initial carbon concentration is The carbon concentration at the surface is The carbon…

Q: A flue gas from a certain furnace burning a fuel of negligible nitrogen content is found by analysis…

A:

Q: A hydrocarbon is burnt with excess air. The Orsat analysis of the flue gas shows 10.81% CO2, 3.78%…

A: When a hydrocarbon, which is composed of carbon (C) and hydrogen (H), is burned in air, it reacts…

Q: The combustion of a gaseous hydrocarbon containing only CH4 and C2H6 with dry air produces a stack…

A:

Q: The combustion of a gaseous hydrocarbon containing only C and H produces a stack gas with Orsat…

A:

Q: The naphtha fraction derived from the distillation of Kuwait crude oil is with 0.02 wt% sulfur…

A: Dear User ! As per our  authoring guidelines, we have answered the first of the two independent…

Q: The exhaust gas from a furnace gives the following Orsat analysis: 13.6% CO2, 2.4% cO, 2.8% O2, and…

A: Basis : 100 moles of exhaust gas- hence, N2 = 81.2 moles hence O2 fed = 81.20.79×0.21 = 21.585 moles…

Q: 4. A waste mixture of 50% xylene (C8H10), 40% toluene (C7H8) and %10 water is to be combusted in a…

A: The mass flow rate of the mixture, m = 500 kg/h Mass composition of the mixture, 50% xylene (X), 40%…

Q: A pure gaseous hydrocarbon is burnt with excess air. The orsat analysis of the flue gas is CO2 –…

A: Given: Orsat analysis of the flue gas CO2-10.2 %CO-1%O2-8.4 %N2-80.4 % It is required to find HC…

Q: A mixed brine by electrolysing, a gaseous mixture is obtained at the cathode having the following…

A:

Q: A Commercial Popcorn Popping Popcorn Popper. We are constructing a 1-liter popcorn popper to be…

A: The popcorn popper is operated in steady flow.  The independent test show that popping the raw corn…

Q: 1 mole ethane, C2H6, is combusted in a reactor by using theoretical amounts of air. The products for…

A: Given combustion of 1 mol ethane to form CO2 and H2O at 25o C To find heat of reaction exiting…

Q: 3. In a reactor, carbon dioxide and hydrogen gas are combined to form methanol (CH3OH) gas and water…

A: Fractional conversion is a way of determining the reaction characteristics. It is defined as the…

Q: Many crude oils contain dissolved hydrogen sulphide  H2S  and carbon dioxide  CO2  that are referred…

A: To describe three methods or processes used to remove H2S and CO2 from fuel gases. We have described…

Q: The burning of pure ethane with dry air gives a stack gas which analyzes 9.92% CO2. The stack gases…

A: Given that, Fuel: ethane C2H6 The mole% of CO2 in the dry stack gas = 9.92% The pressure of stack…

Q: A mixture of benzene and toluene containing 30mol% benzene is required to distill by fractionating…

A: Given: XF = 0.3, XD = 0.92 and XW = 0.06 For Rectifying section of the operating line Equation, Y =…

Q: 100 k/moles of Heptane is burned with 40% excess air. Seventy percent reacts to form CO₂ and the…

A: Given data: Number of moles of heptane = 100 kmol Heptane reacts to form CO2 = 70 % Heptane reacts…

Q: 3) A gas stream containing 80 mol% C,H, and 20 mol% O, is burned in an engine with 300% excess air.…

A: Basis mole gas feed is assumed = 100 mol As per the given data: the feed gas contains: C2H6 = 80…

Q: A solid fuel containing less than 5% Nitrogen is burned to give the following dry flue gas CO2 =…

A: A solid fuel containing less than 5% Nitrogen is burned and the dry flue gas obtained are as follows…

Q: Pure sulfur is burned with 30% excess air. As a result of combustion, 7.23% SO 3, 4.06% SO 2, 7.06%…

A: Given: Pure sulfur (S) is burned with 30% excess air by the following reactions: S + 32O2  →  SO3S…

Q: An iron-carbon alloy initially containing 0.308 wt% C is exposed to an oxygen-rich and virtually…

A: Given:D=5.5×10-10m2sC0=0.308%Cs=0%Cx=0.231%t=6 h=21600 s

Q: A liquid fuel composed of C 86%, H 12%, S 2% is combusted. After 100 kg of its combustion, analysis…

A: GivenComposition of liquid fuelC-86%H-12%S-2%Mass of fuel combusted=100 kgComposition of stack…

Q: A furnace uses natural gas which consists of hydrocarbons. The flue gas analysis is CO2 - 9.5%, O2 -…

A: The atomic ratio of hydrogen to carbon in the fuel is ratio of hydrogen atoms and carbon atoms in…

Q: 16. In a combustion device, methane (CH4) burns with air at 0.7 equivalence ratio, under constant…

A: Given: Methane to air ratio is 0.7 Water is injected to control product temperature with 0.07 mass…

Q: A feed stream containing 15% wt solids and 85% wt water is introduced in a certain process where the…

A: Here it is given that feed having 15 %wt solid and 85  % wt water residue has 13 water by mass

Q: Qg: Ethane may be dehydrogenated to form acetylene C,H, →C,H¸ +2H,. Suppose 1000 kg-moles of C,Hs…

A: Basis: 100 kmol of C2H6 feed to the reactor: The reaction given is; C6H6 → C2H2 + 2H2

Q: The combustion gases from an industrial furnace using a hydrocarbon fuel and dry air enter the stack…

A: Basis: 100 moles of stack gas moles of CO2=12.2 moles moles of O2=3.1 moles moles of CO=1.2 moles…

Q: A synthesis gas consists of 64% hydrogen, 33% carbon monoxide, 2% oxygen and the remainder is…

A: