Solids analysis is one of the most widely used parameters for assessing water quality. Use the following data to determine (a) total solids (TS); (b) volatile solids (VS); (c) dissolved solids (DS); (d) total suspended solids (TSS), and (e) total volatile suspended solids (TVSS) all in mg/L. A sample volume of 150 ml was used in performing all solids analyses. Tare mass of evaporating dish = 24.3520 g Mass of evaporating dish plus residue after evaporation @ 105°C = 24.3970 g Mass of evaporating dish plus residue after ignition @ 550°C = 24.3850 g Mass of Whatman filter and tare Mass of Whatman filter and tare after drying @ 105°C Residue on Whatman filter and tare after ignition @ 550°C = 1.5103 g 1.5439 g 1.5199 g

Solids analysis is one of the most widely used parameters for assessing water quality. Use the following data to determine (a) total solids (TS); (b) volatile solids (VS); (c) dissolved solids (DS); (d) total suspended solids (TSS), and (e) total volatile suspended solids (TVSS) all in mg/L. A sample volume of 150 ml was used in performing all solids analyses. Tare mass of evaporating dish = 24.3520 g Mass of evaporating dish plus residue after evaporation @ 105°C = 24.3970 g Mass of evaporating dish plus residue after ignition @ 550°C = 24.3850 g Mass of Whatman filter and tare Mass of Whatman filter and tare after drying @ 105°C Residue on Whatman filter and tare after ignition @ 550°C = 1.5103 g 1.5439 g 1.5199 g

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Based on the below data from a sieve analysis test, what is the cumulative percent passing 630µm…

A: Cumulative percent passing 630 microne sieve= = (Cumulative mass retained on smaller size sieve /…

Q: samples. Determine the MPN/100 mL using (a) the Poisson distribu- tion [Eq. (2.90)], (b) the MPN…

A: Most probable number (MPN) = It is a method to analyze the numbers of bacteria in a sample of water.

Q: In a constant head permeability test the coefficient of permeability, k, was found to be 2.1 x 10-3…

Q: 1. Determine the effective size (d10, in mm) and the uniformity coefficient (UC) for the sand filter…

A: A sieve analysis result is given, we need to find out the effective size and uniformity coefficient

Q: After three days, the BOD concentration in a water sample was determined to be 75 mg/lt with a…

A: BOD after 3 days,L3 = 75 mg/lt Reaction rate constant, k = 0.345per day

Q: Two samples of sand are mixed together. The percentage of the cumulative retained for each sieve is…

A: Sieve Analysis: It is a process commonly used in civil engineering and engineering to evaluate the…

Q: The following analysis has been obtained for a lake water sample. Please indicate the alkalinity…

Q: A solids removal system is to be designed to remove particles from a water stream. It has been…

Q: Question #6: In a water sample, the following elements are detected. Calculate the total hardness,…

Q: 1. Calculate Total Solids (TS) and Total Dissolved Solids (TDS) in mg/L from the following data of a…

A: Sample amount V = 150 mL Weight of beaker 1 (W1) = 106.5023 gm Weight of beaker 1+ solids without…

Q: Solids analysis is one of the important parameters for assessing water quality. Use the following…

A: Given, Tare mass of evaporating dish=4.3520 g Mass of evaporating dish plus residue after…

Q: A column analysis of a flocculating suspension is shown below. The initial solids concentration is…

A: C0 = Intital solids concentration = 200 mg/L(a) Calculate the removal fraction at each depth and…

Q: Grain size distribution Homework: Following are the results of a sieve analysis: Sieve No. 4 10 20…

A: SIEVE NO. SIEVE SIZE in (mm) Mass of soil retained on each sieve percentage of weight retained (%)…

Q: (b) What is the dry unit weight of the soil in pcf? (c) What is the void ratio of the soil? (d) What…

A: Given, Total unit weight, γt = 124 pcf Specific gravity of solid, Gs = 2.66 Average water…

Q: particulate sample in an air stream is represented by the following weight percent distribution:…

Q: 2.61. The following MPN test results were obtained for three water samples. Determine the MPN/100 mL…

Q: A: Density bottle test: Sample 1: Dal = 0.9982 x (83.49-62.12) (251.3162.12) - (264.41-8 = 2.58 g/ml…

A: SampleDensity, g/cc12.5822.6132.6242.5352.5662.57

Question

Solids analysis is one of the most widely used parameters for assessing water quality. Use the
following data to determine (a) total solids (TS); (b) volatile solids (VS); (c) dissolved solids (DS); (d)
total suspended solids (TSS), and (e) total volatile suspended solids (TVSS) all in mg/L. A sample
volume of 150 ml was used in performing all solids analyses.
Tare mass of evaporating dish
= 24.3520 g
Mass of evaporating dish plus residue after evaporation @ 105°C = 24.3970 g
Mass of evaporating dish plus residue after ignition @ 550°C
= 24.3850 g
Mass of Whatman filter and tare
Mass of Whatman filter and tare after drying @ 105°C
Residue on Whatman filter and tare after ignition @ 550°C
=
1.5103 g
1.5439 g
1.5199 g

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1 se

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A Standard Proctor Test was completed according to Method A described in Chapter 12. The following laboratory data was obtained: Mass of mold = Mass of moist specimen and mold = Volume of compaction mold = Mass of container= 51.5g Mass of container plus moist soil= 261.85g Mass of container plus oven-dried soil= 231.83g Determine the Moisture content, w. (expressed as a percentage, 1 decimal place) Your Answer: 1.98 kg 3.718 kg 0.0009438m3
(c) An analysis of a water sample has produced the following concentrations, as shown in Table 1(c). Determine the following and comment on the result: (i) Total Hardness in mg/L as CaCO3 (ii) Carbonate Hardness in mg/L as CACO3 (iii) Alkalinity in mg/L as CACO3
can you answer Questions 2 and 3 on Homework questions.jpg
A primary clarifier is to be designed to treat a municipal wastewater. The influent to the clarifier has a flow rate of 7570 m³/d and a total suspended solids concentration of 320 mg/L. A laboratory settling test was performed with the following results: Suspended Solids Concentration (mg/L) at Given Depths Sampling Depth (m) Time (min) 0.61 1.22 246 2.44 272 243 1.83 3.05 10 230 262 282 20 157 195 230 253 30 115 160 211 221 230 45 90 134 163 179 195 60 48 102 131 154 170 90 29 58 86 115 141 (a) Determine the design overflow rate and detention time assuming 65% of the suspended solids are to be removed. Use typical scaling/safety factors as appropriate. (b) Determine the required diameter (to the nearest 0.1 m) and the required depth (to the nearest 0.01 m) for the clarifier.
The total mass of a sample is 102.40 g, the total volume is 48.00 cm3, the water content is 20.00%, and the relative density (relative density of the solids) is 3.20. Find the total density (ρ), dry densoty (ρD), and the void ratio (e). Enter your answers in the spaces provided below. keep your answers to two decimal places.
What diameter would a circular clarifier have to be to remove 50 μm particles with 75% efficiency from a 4 MGD (million gallon per day) flow? Assume the particle specific gravity is 1.5 and the temperature is 10°C. Answer: 18 m