Rigid bar ABC is supported by two identical solid bronze [E = 111 GPa, a = 15.3 x 10-6/°C] rods, and a solid steel [E = 219 GPa,α = 11.9 × 10-6/°C] rod. The bronze rods (1) each have a diameter of 19 mm and they are symmetrically positioned relative to thecenter rod (2) and the applied load P. Steel rod (2) has a diameter of 18 mm. The bars are unstressed when the structure is assembledat 33°C. Assume L = 0.42 m. When the temperaturedecreases to -23°C, determine:(a) the normal stresses in the bronze and steel rods 6₁, 6₂ (positive if tensile, negative if compressive).(b) the normal strains in the bronze and steel rods ₁, 2 (positive if stretched, negative if shortened).(1)Answers:σ₁ =E₁ =iM.(2)B(1)LMPa, 0₂ = iμε, ἔγ = iMPa.με.

Answered: Image /qna-images/answer/90bb0c43-e263-402d-aec1-78fab095a026.jpg

Rigid bar ABC is supported by two identical solid bronze [E = 111 GPa, a = 15.3 x 10-6/°C] rods, and a solid steel [E = 219 GPa, a = 11.9 × 10-6/°C] rod. The bronze rods (1) each have a diameter of 19 mm and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 18 mm. The bars are unstressed when the structure is assemble at 33°C. Assume L = 0.42 m. When the temperature decreases to -23°C, determine: (a) the normal stresses in the bronze and steel rods 0₁, 0₂ (positive if tensile, negative if compressive). (b) the normal strains in the bronze and steel rods ₁, 2 (positive if stretched, negative if shortened). (1) Answers: 0₁ = E₁ = i Mi B (1) L MPa, 0₂ = με, Ε = Mi MI με. MPa.

Rigid bar ABC is supported by two identical solid bronze [E = 111 GPa, a = 15.3 x 10-6/°C] rods, and a solid steel [E = 219 GPa, a = 11.9 × 10-6/°C] rod. The bronze rods (1) each have a diameter of 19 mm and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 18 mm. The bars are unstressed when the structure is assemble at 33°C. Assume L = 0.42 m. When the temperature decreases to -23°C, determine: (a) the normal stresses in the bronze and steel rods 0₁, 0₂ (positive if tensile, negative if compressive). (b) the normal strains in the bronze and steel rods ₁, 2 (positive if stretched, negative if shortened). (1) Answers: 0₁ = E₁ = i Mi B (1) L MPa, 0₂ = με, Ε = Mi MI με. MPa.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A2
Calculate the support reactions of the column element given in the figure. Determine the required edge length a to ensure to safety of the element that is made of a material with a safety stress capacity of 200 MPa and that supports the column at point A. ( AB and BC parts have the same material properties. )
C 1.5 m B 950 Nm 0.7 m 50 mm A The rod shown above is composed of two connected segments: AB is steel with shear modulus Gsteel = 75 GPa and BC is brass with shear modulus Grass = 40 GPa. The steel segment has a diameter of 50 mm. a) Determine the required diameter of the brass segment such that the reaction at A will equal the reaction at C under the applied torque of 950 Nm at B. b) What is the magnitude and direction of the reactions at A and C? c) What is the maximum shear stress developed in the steel and brass rods d) What is the angle of twist at B relative to C?
The pin-connected structure consists of a rigid bar ABCD and two axial members. Bar (1) is bronze [E = 90 GPa] with a cross-sectional area of A1 = 510 mm². Bar (2) is an aluminum alloy [E = 68 GPa] with a cross-sectional area of A2 = 320 mm². A concentrated load of P - 75 kN acts on the structure at D. Assume L1-840 mm., L2-420 mm., a-650 mm., b-260 mm., and c-1070 mm. Determine: (a) the normal stresses o1,02 in both bars (1) and (2). (b) the downward deflection vp of point D on the rigid bar. L2 B b D Answers: (a) oi = i MPa, 02 = i MPa (b) VD - i mm.
Determine the degree of determinacy of the structure shown below. Put "-1" if unstable, "O" if determinate and the degree of indeterminacy if indeterminate.
The brass wire has a triangular cross section, 2mm on a side. The yield stress for brass is Ty= 208 MPa. Gbr= 37 GPa. Determine the maximum torque to which it can be subjected so that the wire will not yield and the angle of twist
need fast
Compound axial member ABC has a uniform diameter of d = 1.25 in. • Segment (1) is an aluminum [E1 = 10000 ksi] alloy. The length of segment (1) is L1 = 100 in. • Segment (2) is a copper [E2 = 17000 ksi] alloy. The length of segment (2) is L2 = 140 in. When axial force Pis applied, a strain gage attached to copper segment (2) measures a normal strain of ɛ2 = 2300 uin./in. in the longitudinal direction. What is the total elongation of member ABC? L2 (1) Aluminum B (2) Copper Answer: in, AL = i
Z B D K E F1 F2 AC, CE, EG, GI, IK, BD, DF, FH, HJ = 9.5 m, AZ=11.5 m, ZB=5 mF_1= 65 kN, F_2 = 65 kN For the truss as shown and the loading indicated. Show the free body diagram for the joint: Olncluded in manual solution ONot made 1.Find the reactions. Reaction at A is: kN. (answer to the nearest whole number) Reaction at K is: kN. (answer to the nearest whole number) ENG 2 G 4 O E
Quickly please ??
H1
А P 200 mm В E 150 mm F Three steel (E=200 GPa) rods (AB, CD and EF) support a load of P=30 kN as shown in the figure. Each of the rods AB and CD has a 80-mm2 cross-sectional area and rod EF has a 120-mm2 cross-sectional area. (a) Write the equilibrium equation for the rigid member BED in vertical direction, (b) write the compatibility equation for the given bar system, (c) determine the force in rod EF (d) determine the average normal stress in rod EF.