Required informationAir flowing dver a 1-m-long flat plate at a velocity of 7 m/s has a friction coefficient given as Cf=0.664(Vx/V)-0.5is the location along the plate.P, where xGiven: The properties of air at 20°C are u = 1.825 x 10-5 kg/ms, v = 1.516 x 10-5 m/s, and p= 1.204 kg/m.Determine the air velocity gradient on the plate surface. Evaluate the air properties at 20°C and 1 atm. (Round the final answer to twodecimal places.)The air velocity gradient on the plate surface iss-1

To obtain the velocity gradient of air on the plate, we must first calculate the shear stress acting…

Required information -0.5 where x Air flowing over a 1-m-long flat plate at a velocity of 7 m/s has a friction coefficient given as Cf= 0.664(Vx/V) is the location along the plate. Given: The properties of air at 20°C are p=1.825 x 10-5 kg/m s, v =1516 x 10 5 m2/s, and p = 1.204 kg/m Determine the air velocity gradient on the plate surface. Evaluate the air properties at 20°C and 1 atm. (Round the final answer to two decimal places.) The air velocity gradient on the plate surface is

Required information -0.5 where x Air flowing over a 1-m-long flat plate at a velocity of 7 m/s has a friction coefficient given as Cf= 0.664(Vx/V) is the location along the plate. Given: The properties of air at 20°C are p=1.825 x 10-5 kg/m s, v =1516 x 10 5 m2/s, and p = 1.204 kg/m Determine the air velocity gradient on the plate surface. Evaluate the air properties at 20°C and 1 atm. (Round the final answer to two decimal places.) The air velocity gradient on the plate surface is

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water flows at 20°C with a velocity of 1.1 m/s over a flat plate whose length is 15 cm. The boundary layer thickness at the end of the plate is (the density and viscosity of water are 998 kg/m3 and 1.002 × 103 kg/m⋅s, respectively). (a) 1.14 mm (b) 1.35 mm (c) 1.56 mm (d ) 1.82 mm (e) 2.09 mm
Consider the laminar boundary layer flow of an isothermal fluid ( U ∞ , T ∞ ) over a flat isothermal wall ( T 0 ). At a certain distance x from the leading edge, the local skin friction coefficient is C f , x = 0.0066. What is the value of the local Nusselt number at the same location if the Prandtl number is Pr = 7?
Q3: A square flat plate of 1 m² area whose two surfaces temperature is 90 °C is cooled by air at 20 °C flowing over both sides parallel to the plate at 2 m/sec. Calculate the rate of cooling plate Air at 20°C 1111
Mercury at 25°C flows over a 3-m-long and 2-m-wide flat plate maintained at 75°C with a velocity of 0.01 m/s. Determine the rate of heat transfer from the entire plate.
Find the Power exerted by air on the plate when the drag force on the plate is 42.2 N and the plate moves at a velocity of 17 m/s. 1434.8 W 2.5 W 717.4 W 59.2 W Clear my choice
er its eq =3 m2 Of nic Q2\ A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7°C and the wind is blowing across the pipe at a velocity of 50 km/h. emp. C Properties of air at 1 atm pressure 20 25 30 35 40 Cross-section of the cylinder Circle 45 50 60 70 Density p. kg/m³ 1.204 1.184 1.164 1.145 1.127 1.109 1.092 D 1.059 1.028 Fluid 1007 1007 1007 1007 1007 1007 1007 1007 1007 Gas or liquid Specific Ival GJ/kg K Air V_-50 km/h 7₂-PC Thermal Conductivity k, W/m K 0.02514 0.02551 0.02588 0.02625 0.02662 0.4-4 4-40 40-4000 4000-40,000 40,000 400,000 Range of Re 0.02699 0.02735 0.02808 0.02881 Thermal Diflusivity a, mis 2.074 x 10-5 2.141 x 10- 2.208 x 10-5 2.277 x 10-5 2.346 x 10-5 2.416 x 10- 2.487 x 10-5 10-5 2.780 x 10-5 2.632 x Pipe D-8cm T₁-90°C Nusselt number Nu== 0.989Re0.330 Pr1/3 Nu…
Hot engine oil at 150°C is flowing in parallel over a flat plate at a velocity of 3.30 m/s. Surface temperature of the 1.800-m long flat plate is constant at 50°C. The properties of engine oil at Tf = (150°C + 50°C)/2 = 100°C are k = 0.1367 W/m∙K, v = 2.046 × 10−5 m2/s, Pr = 279.1. Determine the local convection heat transfer coefficient at 0.200 m from the leading edge and the average convection heat transfer coefficient. The local convection heat transfer coefficient at 0.200 m from the leading edge is ___ W/m2·K. The average convection heat transfer coefficient is ___ W/m2·K.
Q2/Engine oil at 80°C flows over a 6-m-long flat plate whose temperature is 30°C with a velocity of 3 m/s. Determine the total drag force and the rate of heat transfer over the entire plate per unit width.
??
H.W.2 /: Consider a 55cm long journal bearing that is lubricated with oil whose viscosity is 0.1 kg/m.s at 20°C at the beginning of operation and 0.008 kg/m.s at the anticipated steady operating temperature of 80°C. The diameter of the shaft is 8 cm, and the average gap between the shaft and the journal is 0.08 cm. Determine the torque needed to overcome the bearing friction initially and during steady operation when the shaft is rotated at 1500 rpm?
Need help with this engineering problem.
An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is 1mm at a location where the Reynolds number is 1000. If the velocity of the fluid alone is increased by a factor of 4, then the boundary layer thickness at the same location, in mm will be 415