Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50 at a rate of 35 L/min and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 3°C. Neglecting changes in kinetic and potential energy and any stray heat transfer, please answer the following. a. Create a schematic of the cycle, use the same numbers used in your textbook the inlet and exit states of each device, and include the energy exchanges between the cycle devices and the surroundings. b. Sketch the cycle processes on a T-s diagram. c. Determine the isentropic efficiency of the compressor. d. Compute the rate of heat supplied to the heated room. e. Determine the COP of the heat pump.

Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50 at a rate of 35 L/min and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 3°C. Neglecting changes in kinetic and potential energy and any stray heat transfer, please answer the following. a. Create a schematic of the cycle, use the same numbers used in your textbook the inlet and exit states of each device, and include the energy exchanges between the cycle devices and the surroundings. b. Sketch the cycle processes on a T-s diagram. c. Determine the isentropic efficiency of the compressor. d. Compute the rate of heat supplied to the heated room. e. Determine the COP of the heat pump.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

! Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50°C at a rate of 0.024 kg/s and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 4°C. (Take the required values from saturated refrigerant-134a tables.) Он 750 kPa (3) Condenser Expansion valve Evaporator +M QL 800 kPa 50°C Compressor Determine the COP of the heat pump. (You must provide an answer before moving to the next part.) The COP of the heat pump is
Steam from a turbine with inlet pressure 30 bar and temperature 350°C is bled at 5 bar and 1 bar to supply a two-stage regenerator to heat up condensate leaving the turbine at 0.08 bar. In each stage, the condensate is heated up to the saturation temperature of the bled steam and the bled steam itself condenses completely. Remember: in a regenerator, there is no contact between the two streams, only heat exchange. of Consider the amount of steam bled at 5 bar and 1 bar, respectively, to be m¡ and m2 kg per steam supplied to the turbine. For the first stage, m¡ kg of bled steam at 5 bar heats each kg of condensate arriving from the second stage without any contact (that is, regeneration). Then, m¡ kg of condensate derived from the bled steam drains into the steam space of the second stage at 1 bar without heat loss. The combined drain from the second stage at 1 bar consists of mi+m2 kg per kg of steam supplied to the turbine. The combined drain is cooled to the condenser temperature…
May you please be as detailled as possible. Thank you
Enumerate the four processes comprised in the cycle of a typical heat engine
An r-134a refrigerator operates a simple vapor compression cycle (SVCC). The evaporatoroperates at -10 °C, while the condenser operates at 1 MPa. R-134a flows around the system at 10 g/s.a. Graph the cycle in a P-h diagram and calculate the temperature at the exit of the compressor, assuming it is 100% isentropicallyefficient.b. Calculate the power required by the compressor (in W) and the cooling effect of the refrigerator (in kW) c. Compute for the COP of the system. What is its percent difference from the reversible efficiency?
A gas turbine cycle with two stage of compression and two stage of expansion, the overall pressure ratio is 9, air enters each stage of compression at 298 K and each stage of turbine at 1200 K. Determine the thermal efficiency of the cycle under the following conditions:- 1- no heat exchanger is used. 2- ideal regenerator is used
Q.5 A standard vapor compression cycle uses R134a as the refrigerant. The condensing and evaporating temperatures are 40°C and 0°C respectively. The isentropic efficiency of the compressor is 80%. The refrigerant flow rate is 0.35 kgs. Calculate (i) the heat absorption rate, (ii) the work input to the compressor, and (iii) the COP of the cycle. Answers: (i) 49.7 kW, (ii) 11.33 kW, (iii) 4.39| Nihal E wijeysuuга Heabins principles of ventilation air conditio win and
The ordinary household refrigerator is a good example of the application of this cycle. Evaporator Freezer compartment Capillary ube Kitchen air 25°C -18°C Condenser coils 3°C Comprosor HW: Q1: Refrigerant-134a is the working fluid in an ideal compression refrigeration cycle. The refrigerant leaves the evaporator -20°C and has a condenser pressure of 0.9 MPa. The mass flow rate is 3 kg/min. Find COP,, COPR. Camat for same Tmas and Tmin, and the tons of refrigeration. Q2: A simple VCRC using R-134a operates with a condensing temperature of 30°c and an evaporating temperature of -20°c .The system produces 50 kw of refrigeration. Determine the : a) Thermodynamic property values at the four main state points of the cycle, b) COP, c) Rate of refrigerant flow. Another measure of the effectiveness of the refrigeration cycle is how much input power to the compressor, in horsepower, is required for each Ton of cooling. The unit conversion is 4.715 hp per Ton of cooling To convert from COP to…
Superheated steam from the boiler expands in the turbine from inlet pressure p₁ of 50 bar and temperature 7 of 487 °C to condenser pressure p2 of 18 kPa. In the condenser, the steam condenses to saturated water. The isentropic efficiency of the turbine ns is 78.0 %. The mass flow of steam 9m,h is 140 kg/s. In the boiler, heat flow rate to the circulating fluid (water/steam) is 458 MW. Read from h,s-diagram and calculate: 1. Enthalpy of the superheated steam h kJ/kg (with zero decimal accuracy) 2. Enthalpy of the steam at turbine outlet after isentropic expansion h₂s kJ/kg (with zero decimal accuracy) 3. Enthalpy of the steam at turbine outlet h₂ kJ/kg (with zero decimal accuracy) 4. Turbine power Pt MW (with one decimal accuracy) 5. Steam content at the turbine outlet X2 kJ/kg (with two decimal accuracy) 6. Enthalpy after condenser h3 kJ/kg (with zero decimal accuracy) 7. Thermal power of condenser Qc 8. Thermal efficiency of the plant n MW (with one decimal accuracy) % (with one…
Below is an ideal cascade refrigeration system with High P = 800 kPa, Intermediate P = 360 kPa, and Low P = 140 kPa.If the lower cycle transfers 69kW of energy to the upper cycle, What is the mass flow rate of R-134A (in kg/s) in the upper cycle? a.0.4014 b.0.3892 c.0.3554 d.0.4357
The following is how a reheat turbine works. It takes steam with a pressure of 1560 psi and a temperature of 780 F and expands it to 430 psi. The steam now returns to the boiler to be resuperheated before returning to the turbine at 410 psi and 600 F. The steam then expands to the condenser temperature of 96 F. Calculate the efficiency of the cycle.
Question 2: (a) The pressure at which the steam should be reheated. (b) The thermal efficiency of the cycle. (c) Total heat input (Qin) (d) Total turbine work output (Wtur.out) (e) Draw the T-S diagram Notes: Assume the steam is reheated to the inlet temperature of the high-pressure turbine. • The moisture content of the steam at the exit of the low-pressure turbine is not to exceed 9.5% Boiler 650 C 17.5 MPa ww Reheater High-P turbine P₁ = Ps= Preheat Pump Low-P turbine Condenser e 15 KPa