Question 2: Consider a non-uniform 10m long cantilever beam, with flexural rigidity of 300 kN/m if 0≤x<5 x+15 300 kN/m if 5 ≤ ≤ 10 25-1 a) What are the boundary conditions for this beam? b) Calculate the deflection function for this beam under a uniform distributed load of 10N/m over the whole beam.

Question 2: Consider a non-uniform 10m long cantilever beam, with flexural rigidity of 300 kN/m if 0≤x<5 x+15 300 kN/m if 5 ≤ ≤ 10 25-1 a) What are the boundary conditions for this beam? b) Calculate the deflection function for this beam under a uniform distributed load of 10N/m over the whole beam.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Topic is Double integration method, please include the complete solution and figures
Solve asap
A simply supported beam, 6m in length, has an initial deflection of 0.50mm at midspan due to its own weight. The said beam is then use to carry the loads as shown. If E=24,870MPa and 1=5400x106mm, determine the following: (Use Area-Moment Method) 1. Weight of the beam in kN/m 2. Maximum Deflection 8kN 5kN 10KN/m 6m
Show full and clear solutions. Use the THREE-MOMENT EQUATION to answer the following question(s). 1. Determine the deflection at B 2. Make the shear force diagram of the continuous beam 3. Make the bending moment diagram of the continuous beam
A simple supported beam made up of a material with the density of 2400kg/m3 has a rectangular cross section of 200mm x 450mm. In addition to the self weight, the beam is subjected at 2/3rd of the span (from left hand) with a point load of P kN. Find out the maximum deflection and slope if the span length of the beam is 3.5 m. (Where P is equal to 55). Consider the self weight of the beam in solving the question.
A cantilever beam, 3.5 m long, carries a concentrated load, P. at mid-length. Given: P = 200 KN Beam Modulus of Elasticity, E = 200 GPa Beam Moment of Inertia, I = 60.8 x 10 mm 1.75m ť How much is the deflection (mm) at mid-length? Select the correct response 100 1.84 29.4 23.5 1.75m
Consider a 3 metre long uniform beam with flexural rigidity of 100 kNm². The beam is supported with a fixed (clamped) support on the left, and a roller support 1 metre from the right hand side. 3m 2m A 1kN/m point load is applied 1 metre from the left hand side. If we find the deflection for this beam, using the boundary conditions for the fixed (clamped) end and for the roller support, we get the equation. y(z) 9600 ((16³-48x² +48r - 16) H(r− 1) - 112³ +18r²) (you do not need to calculate this yourself, but you may verify it if you wish) Have Desmos (or any other computer graphing system you like) draw a picture of the beam under load. Make sure the picture is accurate, and is zoomed appropriately to see the actual bends in the curve. What is wrong with the deflection function to the right of the roller support? b) Solve the deflection for this beam in two parts, as if there were two separate beams: 3m Om 2m 2m For the roller support use the following boundary conditions: y (2)= 0 and…
The beam has a Young's modulus of Eo 100 GPa, a length of / = 4 m and 2nd moment of area of I₂ = 4 m². The intensity of the uniformly distributed load is w = 100 N/m. Now calculate the maximum beam deflection: Umax = X Expected answer: 0.1149623254 (m)
Problem 2 Consider a beam (L = 4m and El =2000 kN-m2) fixed at both and loaded by a uniform load q = 20 kN/m. Use FDM/Mathematica with h = 0.5 m to find the following: a) the maximum deflection b) the bending moment at supports