Question 04 C. A venturi meter is used to measure the flow speed of a fluid in a pipe. The meter is connected between two sections of the pipe (Figure 4.1; the cross-sectional area A of the entrance and exit of the meter matches the pipe's cross-sectional area. Between the entrance and exit, the fluid flows from the pipe with speed V and then through a narrow "throat" of cross-sectional area a with speed v. A manometer connects the wider portion of the meter to the narrower portion. The change in the fluid's speed is accompanied by a change Ap in the fluid's pressure, which causes a height difference h of the liquid in the two 4 arms of the manometer. (Here Ap means pressure in the throat minus pressure in the pipe.) (25 Marks) a. By applying Bernoulli's equation and the equation of continuity to points 1 and 2 in Figure 3.2, show that V 2 Ap pla²-A²) where r is the density of the fluid. b. Suppose that the fluid is fresh water, that the cross-sectional areas are 64 cm in the pipe and 32 cm² in the throat, and that the pressure is 55 kPa in the pipe and 41 kPa in the throat. What is the rate of water flow in cubic meters per second? Meter entrance Pipe Venturi meter Manometer Figure 41 Meter exit Pipe

Question 04 C. A venturi meter is used to measure the flow speed of a fluid in a pipe. The meter is connected between two sections of the pipe (Figure 4.1; the cross-sectional area A of the entrance and exit of the meter matches the pipe's cross-sectional area. Between the entrance and exit, the fluid flows from the pipe with speed V and then through a narrow "throat" of cross-sectional area a with speed v. A manometer connects the wider portion of the meter to the narrower portion. The change in the fluid's speed is accompanied by a change Ap in the fluid's pressure, which causes a height difference h of the liquid in the two 4 arms of the manometer. (Here Ap means pressure in the throat minus pressure in the pipe.) (25 Marks) a. By applying Bernoulli's equation and the equation of continuity to points 1 and 2 in Figure 3.2, show that V 2 Ap pla²-A²) where r is the density of the fluid. b. Suppose that the fluid is fresh water, that the cross-sectional areas are 64 cm in the pipe and 32 cm² in the throat, and that the pressure is 55 kPa in the pipe and 41 kPa in the throat. What is the rate of water flow in cubic meters per second? Meter entrance Pipe Venturi meter Manometer Figure 41 Meter exit Pipe

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A round pipe of varying diameter carries petroleum from a wellhead to a refinery. At the wellhead, the pipe's diameter is 53.5 cm and the flow speed of the petroleum is 13.1 m/s. At the refinery, the petroleum flows at 5.25 m/s. What is the volume flow rate of the petroleum along the pipe, and what is the pipe's diameter at the refinery? volume flow rate: m³/s diameter: cm
Solve
A hydraulic piston has two surfaces which can move when a force is applied to them. On the left side, the piston surface is circular with a cross-sectional radius of 10 cm and on the right side it is square with a side of length 30 cm. A. If I push on the left side with 100 N of force, what total force will be exerted by the fluid in the piston on the right side? B. If I displace the piston on the left side by 18 cm, how far will the right surface move?
The figure illustrates flow through a pipe with diameters of 1 mm and 2 mm and with different elevations. px is the pressure in the pipe, and vx is the speed of a non-viscous incompressible fluid at locations x = Q,R,S,T, or U. T R D=1mm D= 2 mm Select the correct answers. Less than V PQ is PU. Less than V VT is ... 2vQ. Greater than Pu is ... PT. Submit Answer Incorrect. Tries 11/12 Previous Tries Post Discussion S Send Feedback
A large diameter closed top tank is filled with a depth of 3 meters of a fluid (density 1200 kg/m3). A small pipe leading from the bottom of the tank must carry the fluid some height above the fluid level in the tank. a) If a pressure of 2.5 Atmospheres is maintained in the space above the fill line in the tank how high above the fill line can the pipe carry the fluid and still provide an exit speed of 2 m/sec for the fluid out of the pipe? (the pressure at the exhaust end of the pipe is 1 atmosphere or about 1 x 105 pascal) If the pipe diameter is 2 cm, what will be the volume rate of flow (m3 /sec)
Water flows in a pipe as shown in the picture. At point A, the pipe diameter is 18 cm and the speed of the water is 8.0 cm/s. At point B, the pipe diameter is 9 cm. What is the speed of the water at point B. В А
Consider an open cylindrical tank that is half-filled with water and half-filled with oil as shown below. The pressure above the open lid of the tank is Patm. The density of water and oil are ρω and ρoil respectively. What is the pressure at the interface between the oil and water? a. P_atm + (rho_w)gh b. (rho_w)gh c. (rho_oil)gh d. P_atm + (rho_oil)gh
Water flows in the system shown below. The flow exits the pipe at a speed of 4.0 m/s.(a). What is the water pressure when it exits the pipe?(b). What is the height of the column of water?
A tank holds a large amount of water. A pipe is connected to the tank at the upper end and is open to the air at the lower end (see figure).The upper end of the pipe has a diameter of 17.0 cm. The lower end of the pipe has a diameter of 8.60 cm. The speed of the water at the upper end is 2.00 m/s.What is the flow rate of the water in the pipe?
A liquid-filled tube called a manometer can be used to measure the pressure inside a container by comparing it to the atmospheric pressure and measuring the height of the liquid. Such a device (filled with water) is shown in the figure, measuring the pressure inside a balloon filled with an unknown gas. The water level on the side of the manometer which is open to the air is 12.2 cm higher than on the side connected to the balloon. a. Find the gauge pressure in the balloon, in units of Pa. Recall the density of water is 1000 kg/m3. b. Find the absolute pressure in the balloon, in units of Pa.
The flow rate for a typical human aorta is approximately 90 cm3/s. If the aorta has a diameter of 2.0 cm, how fast is the blood moving in cm/s?
Physics Question