Ql: 220V, 7 Hp DC series motor coupled to a fan, the motor draws 25 A and runsat 300 rpm at terminal voltage of 220V and no external resistance, torque of the fanis proportional to the square of the speed, if Ra=0.6 Q and Rf-0.4 N. (Neglectrotational losses):a) Determine the power supplied to the fan and torque developed by the motor.b) The speed is to be reduced to 200 rpm by inserting external resistance,determine the value of this resistance and the power delivered to the fan.

For the given data power delivered and torque developed is determined as shown below

Ql: 220V, 7 Hp DC series motor coupled to a fan, the motor draws 25 A and runs at 300 rpm at terminal voltage of 220V and no external resistance, torque of the fan is proportional to the square of the speed, if Ra=0.6 2 and Rf-0.4 Q. (Neglect rotational losses): a) Determine the power supplied to the fan and torque developed by the motor. b) The speed is to be reduced to 200 rpm by inserting external resistance, determine the value of this resistance and the power delivered to the fan.

Ql: 220V, 7 Hp DC series motor coupled to a fan, the motor draws 25 A and runs at 300 rpm at terminal voltage of 220V and no external resistance, torque of the fan is proportional to the square of the speed, if Ra=0.6 2 and Rf-0.4 Q. (Neglect rotational losses): a) Determine the power supplied to the fan and torque developed by the motor. b) The speed is to be reduced to 200 rpm by inserting external resistance, determine the value of this resistance and the power delivered to the fan.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 3-phase 50 Hz I.M. has a rated torque = 16.7 N.M and maximum torque = 40.5 N.M. If its rated speed = 910 R.P.M, the speed at :maximum torque will be R.P.M 578.280 R.P.M 421.640 R.P.M 590.160 None O
A separately excited DC motor is rotated at 1000rpm, the variation of armature terminal voltage as a function of field current is measured under no-load conditions and tabulated below: IF 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 VT 0 30 60 85 102 115 124 130 134 The field winding supply VF = 24V and the field resistance is adjustable. The armature winding resistance RA=0.20 and the armature terminal voltage VT=130V a) Calculate the field current if the motor is operated with no-load at 1000 rpm b) The motor drives a load at 1200 rpm. Calculate the armature voltage at 1200 rpm if the field resistance RF=600 c) Calculate the torque for the above condition d) The motor supplies a mechanical load of 4000W at 1450rpm. The mechanical rotational losses are 160W, calculate the efficiency.
3. A 4 pole, 250 dc shunt motor has a lap connected armature with 960 conductors. The flux per pole is 2 x 102Wb. Calculate the torque developed by the armature and the useful torque in N-m when the current taken by the motor is 30A. The armature resistance is 0.12 ohm and the field resistance is 125ohm. The rotational losses amount to 825W
Developed torque??
A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing 50 A current at 0.8 power factor lagging. The stator and rotor copper losses are 1.5 kW and 900 W respectively. The friction and windage losses are 1050 W and the core losses are 1200 W. The air-gap power of the motor will be
A DC motor should be operated in a strong field which is due to the What happens to if suddenly goes a) nothing, it continues rotating b) it over speeds c) it stops rotating current if moter if rotating to zero. as before
SThis course d. K = 101.86 and flux = 3.33 mWb / pole A 180-V, DC motor is connected as a cumulatively-compounded DC motor. Its characteristics are given below: RA=0.10 2 Rs=0.05 2 RF= 125 2 Radj = 100 2 %3D NF= 1000 turns NSE= 10 turns IL. rated = 55 A nm= 1800 RPM This motor has compensating windings and interpoles. When the motor is rotating at 1680 RPM, 180 V supply, 52 A armature current, the rotational losses are 933 Watt. What torque is induced by this motor? Select one: Oa. Induced Torque = 54.5 N.m Ob. Induced Torque = 50.9 N.m Oc. Induced Torque = 45.6 N.m. Od. None Is this armature winding a progressive.or a retro-progressive winding? 10
A 6-pole, 50-Hz, 3-φ induction motor is running at 950 rpm and has rotor Copper loss of 5 kW. Its rotor input is ......kW. 100 10 95 5.3
Reducing the supply voltage so that Vnew = Vold / V3 reduces the maximum torque of the motor so that Tmaxnew= ...Tmaxold . * .... ...
a 220 V dc shunt motor has armature resistance 0.23 ohm, on load it takes armature current 40 A and turnes at 720 rpm, if the flux of motor is reduced by 10% without changing the load torque . Find the new speed of the motor.
A DC series motor having a resistance of 0.4 ꭥ and runs at 2000 rpm when connected to 250 V supply and drawing a current of 20 A. (i) What resistance must be added in order to limit the speed to 4000 rpm when armature current is 5A? Assume flux varies linearly. (ii) What resistance must be added to limit the speed to 1000 rpm when armature current is 30 A? Assume that the flux at 30 A is 20% more than that at 20A. (iii) At what speed the motor will run if it is connected directly to 250 V supply when the load is such that the current drawn is 30 A?
A 3 phase, 1500 rpm, 2200 V, star connected synchronous motor has an impedance of 0.4+j90 per phase. At some excitation 2900 V is induced in the armature. Find the maximum torque developed by motor before the motor breaks out of synchronism. Also find the load angle this time.