Q4/ A concrete mixture has 310 kg cement, 550 kg sand, 1300 gravel and 185 kg water. Calculate the followings: A. The temperature of the mixture if you have temp. of cement= 55°C, temp. of sand= 30°C, temp. of gravel- 35°C and temp. of water= 25°C. B. The required amount of ice to reduce the concrete temperature to 20°C.

Q4/ A concrete mixture has 310 kg cement, 550 kg sand, 1300 gravel and 185 kg water. Calculate the followings: A. The temperature of the mixture if you have temp. of cement= 55°C, temp. of sand= 30°C, temp. of gravel- 35°C and temp. of water= 25°C. B. The required amount of ice to reduce the concrete temperature to 20°C.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Explain all how you came to your conclusion..
Calculate the required adjustment to the amount of mixing water per cubic yard of coffee to maintain a combatant w/c ratio. Mention if water is added or removed from the mixture. The concrete producer plans to use aggregate from the stockpile: 1920 Ibs/yd^3 coarse aggregate and 1160 Ibs/yd^3 of fine aggregates, properties of aggregate are: Coarse aggregate: Absorption capacity= 3.5% Total moisture= 4.3%. Fine aggregate: Absorption capacity= 1.4% Total moisture= 0.8%
Compare materials quantity for M30 grade of concrete?
Answer carefully the following questions : 1 Die is great Se me Meaning of normal con 3-what is the range of values of standard 4-How the consistency of cement paste is measured? 5-State the significance of initial setting time and final setting time of cement. 6-What is the range value of compressive strength for normal concrete 7 days and 28 days? ODOO TOSTSEC of C e Cheet or aggi gan grading on the properties of concrete? -Describe kinds of slump.. OF MOON Cone. what is the approximate value of Flexural su compressive 10-What is the approximate value of spli compressive strength? nave 25 MPa tor strength if we have 25 MPa for
Find the quantities of cement, fine aggregates (FA) and coarse aggregates (CA) for 1 m³ of concrete. The void ratio in cement is 60%, in FA is 40% and in CA is 44%. Take Materials properties as: Mix is 1:2:4 with water-cement ratio of 0.59. One bag of cement weighs 50 kg (neglecting the empty weight of bag) and density of cement is 1440 kg/m³. Density of FA is 1780 kg/m³ and coarse aggregate (CA) is 1650 kg/m³. Volume of one bag of cement is 34.7 litres. Assume volume of air in concrete as 3% per m³ of concrete.
Thank you so much. Please hand write if possible
asap!
What is the w/cm for the following 1 m3 batch of concrete? Express your answer with 2 decimal places. Material Batch mass, kg Cement 250 Pozzolan 84 Fine aggregate (absorption 0.8%. moisture content, 4%) Coarse aggregate (absorption 0.4%. moisture content 1.5%) Water added to the batch mix 623 1177 116
The volume of one bag of cement is (a) 0.0214 cu.m (b) 0.0347 cu.m (c) 0.0434 cu.m (d) 0.0609 cu.m
compute for the corrected amount of water needed in the concrete mix if the mass and fine coarse aggregates are 740 kg and 1100 kg, and both have a natural moisture content of 2% and 1.5% respectively. water/cement ratio is 0.5 and the mass of ratio of concrete is 1:2:3
For the beams and columns of a structure the followings are specified or determined. Design an appropriate concrete mix for this work on volumetric basis. Explain each step of the mix design. When you use the tables in the lecture notes, indicate the value you take from table. Give the final weights of each ingredient in tabular form at the end of your calculations (after doing adjustments for aggregate field moisture). Required average 28-day strength: 30 MPa Slump: 75-100 mm Dmax: 19 mm Dry rodded unit weight of coarse aggregate: 1700 kg/m’ ASTM Type I cement with Specific gravity=3.25 Non-air entrained concrete Density of water= 1000 kg/m³ Table 1. Aggregate information Moisture Absorption сараcity 1.2 % SSD Bulk Fineness specific gravity Modulus content Coarse 2.71 0.8 % aggregate Fine aggregate 2.66 1.5 % 2.5 % 2.8 [5 pts] 4) Same concrete mix is cast at two locations, A and B. 1 hour after mixing, the slump loss at A is 5 cm and the slumn loss at R is 10 cm Could vou…
Q1 What moisture condition should the coarse and fine aggregate be in when mixing the concrete? A Unknown B Saturated C Oven Dry D Air Dried E SSD Q2 What restriction is placed on the size of a sample of a concrete batch? A 30 L B 15 L C 20 L D 10 L E 5 L