Answered: Q1: A specimen made from Titanium with…

Q1: A specimen made from Titanium with diameter 4 mm subjected to force of 2500 N. The specimen extended by 0.422 mm. If the young modulus is 107 GPa. Find the gauge length of specimen.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Find tensile load
Q1: 30-mm-diameter steel bar is to be used as a torsion spring. If the torsional stress in the bar is not to exceed 110 MPa when one end is twisted through an angle of 30°, what must be the length of the bar in m? modulus of rigidity=80 GPa . (close to two decimal)
None
Q // The tensile tests were performed on longitudinal specimens of compact bone. The E1= 0.0004 65° strain rosette is mounted on a bone were the readings are obtained for each gauge as shown in figure. Determine (a) the principal strains and (b) the shear strain and average normal strain. 50° E2 = - 0.0005 65° €z = 0.0003
A tensile specimen havign a diameter of 6 mm and a gauge length of 50 mm was tested to fracture and the stress-strain diagram is show. Poisson's ratio of material, v = 0.3 Determine the load P that the sample is subjected to when a stress of 300 MPa is applied. What is the instantaneous diameter of the sample given a longitudinal strain of 0.002?
solve first one only and use b h and x to find the strain
If the engineering strain in a tensile bar is 0.0025 and Poisson’s ratio is 0.33, find the original length and the original diameter if the length and diameter under load are 2.333 ft. and 1.005 in. respectively.
3. The elastic portion of the stress-strain diagram for a titanium alloy used for medical implants shown. The specimen from which it was obtained has an original diameter of 10 mm and a gage length of 45 mm. If a tensile load of P = 300 kN is applied to the specimen. Take Poisson ration 0.3. a) determine specimen's new length after deformation. b) determine specimen's new diameter after deformation. Make sure to include the calculation for all steps including E and longitudinal and lateral strains MPa 700 600 500 400 300 200 100 E 10-3 10 15 (Ans:lnew - 46.718mm, Dnew - 9.885mm, ) for tregting
Question 3 3. A string 4 mm in diameter has original length 2 m. A force of 200 N. pulls the string. If the final length of the spring is 2.02 m, determine: (a) stress (b) strain (c) Young's modulus.
A sample is deformed until the uniaxial strain is 0.251. Calculate the corresponding true strain. • Express your answer in scientific notation using 3 significant figures, e.g., 1.23*10^(-4). Use the pop-up MathType window to enter your answer. Check