Q1: A pharmacy with dimensions (L= 10 m, W= 10 m, H= 3 m) are to be air- conditioned with 24 °C DBT and 50% RH at following details: • East wall 10 m, group No.2 with U-value =0.643 W/m*K. • East Window type B, area 30% from the wall, U-value 1.2 W/m'K and Sc =0.8 • The wall has also a door (2 × 2) m manufactured of Maple with a thickness of 35 mm, CLTDcorrected door = 23 °C • Roof type 9, U-value =4.16 W/m K • 6 devices are all hooded with efficiency 80%, each device consume 250 watt. Occupancy of 3 pharmacists and a manager • The space is lighting by 10 fluorescent tubes of 40 watt power consumption • Infiltration 0.75 ACH. • Outside conditions are 45 °C DBT and 24 °C WBT, DR=11.6 • The space is at latitude of 32 N. • Take CLF = 1 when needed. Determine the cooling load in TR from the east wall, east window, door, roof, devices, occupancy, lighting, infiltration and ventilation (based on number of people) on August at 2 p.m.

Q1: A pharmacy with dimensions (L= 10 m, W= 10 m, H= 3 m) are to be air- conditioned with 24 °C DBT and 50% RH at following details: • East wall 10 m, group No.2 with U-value =0.643 W/m*K. • East Window type B, area 30% from the wall, U-value 1.2 W/m'K and Sc =0.8 • The wall has also a door (2 × 2) m manufactured of Maple with a thickness of 35 mm, CLTDcorrected door = 23 °C • Roof type 9, U-value =4.16 W/m K • 6 devices are all hooded with efficiency 80%, each device consume 250 watt. Occupancy of 3 pharmacists and a manager • The space is lighting by 10 fluorescent tubes of 40 watt power consumption • Infiltration 0.75 ACH. • Outside conditions are 45 °C DBT and 24 °C WBT, DR=11.6 • The space is at latitude of 32 N. • Take CLF = 1 when needed. Determine the cooling load in TR from the east wall, east window, door, roof, devices, occupancy, lighting, infiltration and ventilation (based on number of people) on August at 2 p.m.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Please provide a detailed explanation Consider a system with the same speaticahons as the Clousius"atatement except that it allows work done on the cystem. Please calculate the minimum work done on the cystem inorder to tamfer heat Eom the low-Hempboture to Hhe high lempealucaad
Note:- • Do not provide handwritten solution. Maintain accuracy and quality in your answer. Take care of plagiarism. • Answer completely. • You will get up vote for sure.
#1--- #2 << < < < < T(°C) #6 300 200 85 #3 ---- 100 0 L+a 20 Pb-Sn System 40 D #4 a+B #5 60 C, wt% Sn E mary eutectic 80 eutectic L L4B #6 100 F В O LD 11. B ME IV.F V. A VI. C
2. Calculate Passive House's energy demand. a, Calculate window U-value based on given data in figure. 0.117m 0.117m 0.134m C₂ Utotal Wglass-0.996m = 1.229m glass Uglass = 0.6- glass W window - 123m W m².c 0.117m 1.48m nwindow W m² °C Uframe = 1.6- Area₁ U₁ + Area2 U₂... + Area, * U₁ Area total b. With the calculated U value for the windows find out how much power needed to maintain 20°C in a home with outside of 0°C based on the following: the house having a square footprint 17 m by 17 m, walls 2.5 m high (Uwalls = 0.152 each of the four walls hosting two windows, and each window having an area of 2 m². The entry door area is 2.5 m² (Udoor = 0.65- ). What are the heat loss rates for the installed windows, the door, the walls, the ceiling, and the floor? What is the overall heat loss rate of the home? m². C 1. What do these calculated heat loss rate values mean? 2. What is the definition of the passive house? 3. What does the U-value represent? Use its unit as a hint and describe it…
The composite wall of an oven consists of three materials, two of which are of known thermal conductivity, ka = 20 W/m · Kand ke = 50 W /m · K, and known thickness, LA = 300 mm and Lc = 150 mm. The third material, B, which is sandwiched between materials A and C, is of known thickness, Lg = 150 mm, but unknown thermal conductivity kg. ka ke Air T., h Under steady-state operating conditions, measurements reveal an outer surface temperature of T, = 20°C, an inner surface temperature of T, = 600°C, and an oven air temperature of T = 800°C. The inside convection coefficient h is known to be 25 W/m? · K. What is the value of kg?
For the calculation of heat transfer by natural transport from a horizontal cylinder, what is the dcharacteristic length found in the number Gr. Please select one: a. Length b. Half of the perimeter c. None of them d.Diameter e. Environment
7
solve all 4, show assumptions and comments for each.
G. ?" Which matcrial has the higher themal conductivity'? d: 5. (ht What is the overall heat-transfer coefficicnt U? Describe a physical situation,in す 5コ . :- which it could be used. 石:.5 . (c) A standard Schedule 405 cm steel pipe (inside diameter 5.25 cm and wall thickness 040 cm) čarrying steam is lagged (i.e insulated) with 5.0 cm of 85 per cent magnesia covered in turn with 5.0 cm of cork. Estimate the heat loss per hour per meter of pipc if the inner surface of the pipe is at 120°C and the outer surface of the cork is at 32°C. The thermal conductivitics of the substances concerned are 9. of Material Thermal Conductivity [Watts/ha K] Steel 45 85% Magnesia (0.07 Cork 0.05 At いい 1
Q3: For sysem shown in Figure, Determine final temperature if R= 0297 KPam’ and cp = 1.04 Kikg:
When operating at steady-state in a 250C room, the surface temperature of a 20 W incandescent light bulb is 1250C. Approximate the bulb as a 40 mm diameter sphere to estimate the rate of heat transfer from the bulb via convection. Air properties: k-0.030 W/m-K Spear surface area: S=4tr²³ v-20.92x10" m²/s Sphere volume: V=(4/3)Tr Pr-0.700
The internet café, shown in the figure, is on the ground floor of a single storey (G) building in Çanakkale. The neighboring room, store, is not conditioned Downstairs: Basement (not conditioned) Upstairs: Terrace (sunlit) Outer walls: 30 cm brick, U=3.0 kJ/h.m2. 0C, exterior surfaces dark painted Inner walls: U=7.0 kJ/h.m2. 0C Ceiling: 15 cm concrete, U=2.0 kJ/h.m2. 0C Floor: U=6.0 kJ/h.m2. 0C Windows: Single window with single absorbing glass, metal sash, industrial type, shaded with dark colored, half drawn inside roller shade, wind speed is 16 km/h Outer door: U=5.0 kJ/h.m2. 0C, without glass (assume no solar heat gain through the outer door) Average occupancy is 45 people 2000 W electric lights in total 45 PC, each releasing 200 W of heat.a) Determine the appropriate db and wb temperatures (inside design conditions) for the office in summer conditions and calculate the heat gain at 16:00.b) Determine the appropriate db temperature, and find the wb temperature and also…