Q1) A 4 poles de separate excited generator has 56 slots, and each armature coil has 8 turns. Thewire used to wound the armature has a resistivity = 6.2 x 10-8 2.m, and the average length ofeach turn = 1.8 m, the wire cross-section area = 5 mm². If the flux per pole = 0.012 web, findthe load voltage when the generator is wave wound, driven at 110 rad/sec, and supplies 7 A.3+10/50+8/Q2) A series de motor has flux characteristics given by p= web, when I represent the field'scurrent. If the supply voltage = 100 V, the armature resistance = 0.7 £2, and the field resistance= 0.32. The motor takes 25 A when driving a load at 1450 R.P.M. Find load torque, startingtorque, and no-load speed. Draw the required circuit diagram.Q3) Two de generators, A and B, connected in parallel with the following characteristics:GA: P=3 Kw; Vr = 200 V, ra = 192.GB: E=210 V; I, = 20 A, ra = 0.8 2.Find the maximum possible load power, the power supplied to the load at floating conditions.Q4) Answer any four questionsA: Draw the circuit diagram for the shunt generator and give the condition for its voltage build-up?B: If the no-load voltage of the series generator is 12 V. and the load voltage of it at a certainload is 180 V. What will be the voltage regulation?C: The separate excited motor with no-load speed = 150 rad/sec has a speed = 115 rad/sec at atorque = 22 N.M. At what torque will its speed be 1350 R.P.M?D: Why the load voltage at the same conditions for shunt connected generator is less than whenseparate excited?E: The parallel operation of two dc, A and B, generators when EA> EB will cause a circulatingcurrent. What is the direction of this current, and which machine will act as a generator?

To find the load voltage of the generator, we need to calculate the armature resistance and the…

Q1) A 4 poles de separate excited generator has 56 slots, and each armature coil has 8 turns. The wire used to wound the armature has a resistivity = 6.2 x 10-8 22.m, and the average length of each turn = 1.8 m, the wire cross-section area = 5 mm². If the flux per pole = 0.012 web, find the load voltage when the generator is wave wound, driven at 110 rad/sec, and supplies 7 A.

Q1) A 4 poles de separate excited generator has 56 slots, and each armature coil has 8 turns. The wire used to wound the armature has a resistivity = 6.2 x 10-8 22.m, and the average length of each turn = 1.8 m, the wire cross-section area = 5 mm². If the flux per pole = 0.012 web, find the load voltage when the generator is wave wound, driven at 110 rad/sec, and supplies 7 A.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A magnetic circuit with a cross-sectional area of 20 cm? is to be operated at 50 Hz from a 120 V rms supply. The number of turns required to achieve a peak magnetic flux density of 1.8 T in the core is
AC Machinery Fundamentals A three-phase delta-connected six-pole winding is installed in 36 slots on a stator. There are 150 turns of wire in each slot of the windings. All coils in each phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1000 r/min. What are the resulting phase and terminal voltages?
The armature of a two-pole generator is rotating at 3600 r/min. The armature has a simplex lap winding with a total of 1504 conductors. Determine the generated voltage when the flux per pole is 600,000 x 10-8 Wb. 5.5
5-5.When one coil of a magnetically coupled pair has a current 5.0 A the resulting fluxes ?11and ?12 are 0.2mWb and 0.4mWb, respectively. If the turns are N1= 500 and N2=1500, find L1, L2, M, and the coefficient of coupling k
Please solve , last time i got wrong answer
For the electromagnet of Figure-a. Find the flux density in the core.b. Sketch the magnetic flux lines and indicate theirdirection.c. Indicate the north and south poles of the magnet.
A ferromagnetic core is shown in Figure Pl-2. The depth of the core is 5 cm. The other dimensions of the core are as shown in the figure. Find the value of the current that will produce a flux of 0.005 Wb. With this current, what is the flux density at the top of the core? What is the flux density at the right side of the core? Assume that the relative permeability of the core is 800. 1-5. 10 cm- 5em 20 em 15 cm 15 cm 15 cm Coe depth - Scm SOLUTION There are three regions in this core. The top and bottom form one region, the left side forms a second region, and the right side forms a third region. If we assume that the mean path length of the flux is in the center of each leg of the core, and if we ignore spreading at the corners of the core, then the path lengths are I, = 2(27.5 cm) = 55 cm, I, = 30 cm, and /, = 30 cm. The reluctances of these regions are:
A four pole machines generates 250V when operated at 1500 rpm. If the flux per pole is 1.85 x 106 maxwell, the number of armature slots is 45 and the armature winding has two parallel paths. If the speed of the generator is reduced to 1350 rpm, what would be the generated voltage. To what value of flux per pole should the excitation be adjusted if the generated voltage is to remain the same at 250V
Please help i want urjent answer i am waiting
A simple generator has a square armature 9.0 cm on a side. The armature has 80 turns of 0.59-mm-diameter copper wire and rotates in a 0.700-T magnetic field. The generator is used to power a lightbulb rated at 12.0 V and 25.0 W. Part A At what rate should the generator rotate to provide 12.0 V to the bulb? Consider the resistance of the wire on the armature. Express your answer to two significant figures and include the appropriate units. HA ? f = Value Units
3-5. A three-phase, A-connected, six-pole winding is installed in 36 slots on a stator. There are 150 turns of wire in each slot of the windings. All coils in cach phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rolation of the magnetic field is 1000 r/min. (a) What is the frequency of the voltage produced in this winding? (b) What are the resulting phase and terminal voltages of this stator? 3-6. Athree-phase, Y-connected, 60 Hz, two-pole synchronous machine has a stator with 5000 rurns of wire per phase. What rotor flux would be required to produce a termi- nal (line-to-line) voltage of 13.2 kV? 3-7. Modify the MATLAB in Example 3–1 by swapping the currents flowing in any two
A three-phase Y-connected four-pole winding is installed in 24 slots on a stator. There are 40 turns of wire in each slot of the windings. All coils in each phase are connected in series. The flux per pole in the machine is 0.060 Wb, and the speed of rotation of the magnetic field is 1800 r/min. (a) What is the frequency of the voltage produced in this winding? (b) What are the resulting phase and terminal voltages of this stator