Problems-3 1- Two stage compressor with suction pressure and temperature of (100kPa) and (300K). The compression ratio for the low pressure stage is (5.5:1) and for high pressure ratio is (6.5:1). The temperature of the air leaving the intercooler is (47°C). Determine the work done in the two stages of compression on air, the heat loses in the two stages. Take the compression according to PV¹ 22C.

Problems-3 1- Two stage compressor with suction pressure and temperature of (100kPa) and (300K). The compression ratio for the low pressure stage is (5.5:1) and for high pressure ratio is (6.5:1). The temperature of the air leaving the intercooler is (47°C). Determine the work done in the two stages of compression on air, the heat loses in the two stages. Take the compression according to PV¹ 22C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I need the answer as soon as possible
4. A two-stage air compressor with an intercooler takes in air at 14.6 psia at 62 degree F anddelivers it at 502 psia. The temperature of the air leaving the intercooler is 62 degree F.Calculate the work required per pound of air delivered if compression isisentropic, ft-lbf/lbA. (-)108,072 ft-lbf/lb C. (-)168,072 ft-lbf/lbB. (-)118,072 ft-lbf/lb D. (-)128,072 ft-lbf/lb
Can I ask for the schematic diagram of this? and also the Ts diagram and Ph diagram. Thank You! Catalogue data for R-32 compressor with a displacement of 80 L/s show the capacity to be 8 tons when the suction conditions are 0.2 MPa and -20°C and condensing temperature is 50°C. The refrigerant leaves the condenser as saturated liquid. Calculate the actual volumetric efficiency and the brake work of the compressor if the compressor efficiency is 65%.
In an ammonia refrigerator , the pressure in the evaporator is 267. 58 KPa and the ammonia at is 0.14 dry while at the exit is 0.86 dry . During compression the work done per kg of ammonia is 20 ,000 kg .m . Calculate volume of the vapor entering the compressor per minute if the rate of ammonia circulation is 6.54 kg. The compressor has a volumetric efficiency of 90% and it runs at 150 rpm .The ratio of stroke to bore is 1 .Latent enthalpy of ammonia at based on its evaporating pressure is 320 Kcal per kg and its latent specific volume of ammonia based on its evaporating pressure is 0.436 m3 per kg .Specific volume of ammonia WITH PH DIAGRAM
an air compressor of three stage compresses air from 100 kpa to 1000 kpa. calculate the intercooler pressure between the first and second stage
Solve it correctly please. I will rate accordingly with 3votes.
A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m³/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. calculate: 1. The intermidiate pressure ratio 2. The intermidiate pressure at first, second and third stages in kPa
A four stage single acting air compressor running in an atmospheric at 87 KPa and 15 degrees Celsius has a free air delivery of 2,83 m³/min. The section pressure and temperature are 80 KPa and 32 degrees Celsius respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 degrees Celsius, take n=1.3 for all stages. Calculate : 1. The intermidiate pressure ratio in 3 decimal place 2.The intermidiate pressure at first, second and third stage in KPa 3. The mass flow rate in kg/min 4.The power input in KW
Explain in essay why using too much compressor stages is not efficient.
An iseal Brayton cycle has a pressure ratio of 6:1. The temperature of the air is 22 degrees celsius at the inlet to the compressor and 1080 derees celsius at the inlet to the turbine. Take specific heat at constant pressure and constant volume for air as 1,006 KJ/kg K and 0,717 KJ/kg K respectively. Calculate: 1. the compresion absolute temperature to one decimal place 2. the work ratio of the plant to three decimal places 3. the specific work output to the turbine and specific work input to the compressor , to one decimal place and SI unit 4. the thermal efficiency of the plant to one decimal place
i need the answer quickly
For a compression ratio of 4.56 (V1/V2), determine the final temperature of air inside the closepiston cylinder assembly if the initial condition is at STP. Final pressure is 847.75kPa a. 273.89260C b. 271.50380C c. 279.13430C d. 277.92850C