Problem 3 A 1mm filament produces a 1mm x 1mm electron beam incident on an anode disk with anode angle = 13°. The center of the focal spot is 1 m away from a detector which is centered at the center of the focal spot on the anode disk and is 50 cm wide. Determine the effective focal spot dimensions on the disk and the dimensions of the focal spot in the center of the detector, at the far anode edge of the detector, and at the far cathode edge of the detector (see figure below which is definitely not to scale). 1 m 1 mm 40 cm

Problem 3 A 1mm filament produces a 1mm x 1mm electron beam incident on an anode disk with anode angle = 13°. The center of the focal spot is 1 m away from a detector which is centered at the center of the focal spot on the anode disk and is 50 cm wide. Determine the effective focal spot dimensions on the disk and the dimensions of the focal spot in the center of the detector, at the far anode edge of the detector, and at the far cathode edge of the detector (see figure below which is definitely not to scale). 1 m 1 mm 40 cm

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: Calculate the wavelength corresponding to an electron with the energy of 104 eV (kiloelectronvolt).…

A: Given that Energy ( in eV ) = 104 eV . In joule : 104eV = 104×1.6 × 10^-¹⁹J . So we know…

Q: X-rays with wavelengths of 128 pm was used to study a crystal which produced a reflection of 15.8…

A: Given data: Wavelength λ=128 pm Angle θ=15.8o Order n = 1

Q: A laser with 589 nm wavelength and a beam diameter of 2 mm is fed through a beam-expander, then…

A: Given Data: The wavelength of light (λ) = 589 nm = 5.89×10-7m.Beam diameter (d) = 2 mm = 0.002…

Q: The structure factor defines the amount of scattering from the planes hkl in the direction e defined…

A: Let us consider the Geometrical structure factor given by: Fhkl=∑j=1N fjhkl exp 2πihxj+kyj+lzjFhkl…

Q: Diffracted rays Incident rays 1 2 1 2 d Figure 1: Problem 2.

Q: A double-slit experiment is performed with sodium light (λ = 589.0 nm). The slits are separated by…

A: The double slit experiment is a demonstration of the wave-particle duality. In the experiment, light…

Q: An X-ray beam with A = 154 pm incident on the surface of a crystal produced a maximum reflection at…

A: Given: The wavelength (λ) of the X-ray beam is 154 pm. The order (n) of the reflection is 1. The…

Q: A patient 12 in thick is positioned on a table 15 in from the target of an x-ray tube. The region of…

A: The objective of the question is to determine whether the entire region of interest in the patient…

Q: 1. An X-ray beam of wavelength 0.71 A is diffracted by a cubic KCL crystal of density 1.99x10^3…

A: KCL has a FCC structure, Hence effective toms is n’ =4, The molecular weight of the KCL is 74.6 amu.…

Q: Malo Manos was playing with his sister's electric parallel plate system when he noticed that a…

Q: Tungsten is a very high density, high melting point, and hard metal. These properties are partially…

A: Tungsten structure is BCC with mass ;m=183.3u Length of side of BCC=0.3155nm We have to find density…

Q: A crystal sample of bacteriorhodpsin, a light-sensitive protein found in halobacteria that responds…

A: The expression for the Bragg diffraction for the maximum is as follows: 2dsinθ=nλ…

Q: A beam of x rays of wavelength 29.3 pm is incident on a calcite crystal of lattice spacing 0.313 nm.…

Q: A beam of 150 eV electrons are directed at normal incidence onto a crystal surface. The m = 2…

A: According to the Bragg's law, 2d×sinθ = mλ where, d = spacing of the crystal layers θ = incident…

Q: What (X-ray based) analytical technique would you use if you wanted to precisely measure the…

A: To precisely measure the chemical composition of a small micron-sized area in a crystal, one…

Q: Problem 5. Two beams of individual irradiances I₁=1 W/m² and 1₂=9W/m² are combined at a detector. A)…

A: It is given that, The intensity of the first beam,…

Q: X-rays of wavelength 0.0552 nm are scattered from a crystal with a grazing angle of 11.8°. Assume m…

A: This problem can be solved using Bragg's law.

Q: For a He-Ne laser at 1 m and 2 m distances from the laser the output beam spot diameters are 4mm and…

Q: uistan ViSIon! During the deep X-ray therapy high energy X-rays are used. They are filtered by…

Q: Problem 3. A Fabry-Perot laser cavity is made of two identical mirrors. Each mirror has an optical…

A: Given: Optical power reflectance of each mirror R=0.999 The distance between two mirror d=10 cm=0.1…

Question

Problem 3.
A 1mm filament produces a 1mm × 1mm electron beam incident on
an anode disk with anode angle = 13°.The center of the focal spot is 1 m away from a detector
which is centered at the center of the focal spot on the anode disk and is 50 cm wide. Determine
the effective focal spot dimensions on the disk and the dimensions of the focal spot in the center
of the detector, at the far anode edge of the detector, and at the far cathode edge of the detector
(see figure below which is definitely not to scale).
1 m
աալ
0
40 cm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Define the given data :

VIEW

Step 2: Calculation of effective focal spot dimension on the anode disk :

VIEW

Step 3: Calculation of dimension of focal spot in the center of detector :

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Superimpose on a single plot EN, ER, and EA versus r up to 1.0 nm.
Q3: The below table lists diffraction angles for the first three peaks (third -order) of the x-ray diffraction pattern for some metal. Monochromatic x-radiation having a wavelength of (a) Determine the lattice constant. (b) radius of atoms. (0.1234 nm) was used for FCC crystal ? Peak miller Diffraction Number indies Angle (2e) 1 101 88 100 98 3 111 108
The (200) plane gives rise to a diffraction peak in simple cubic (sc), body-centred cubic (bcc) and face-centred cubic (fcc) structures. What are the hkl values of the next 2 planes that also give diffraction peaks in all 3 of these structure types?
The spacing between atoms in KCl crystal is 3.1 x 10^-10 m. At what angle from the surface will a beam of 3.14 x 10^-11 m x-rays be constructively scattered? (Ans. 2.9 degrees)
Perry O’tic wanted to look at the atomic emission spectrum of Helium. He created a spectroscope with a diffraction grating (4900 lines per cm) and two metersticks. The diffraction grating was located 23 cm from the optical slit. When Perry O’tic looked through the diffraction grating, he observed a spectral line 8.0 cm from the optical slit. What is the wavelength of the observed spectral line?
Calculate the wavelength corresponding to an electron with the energy of 103 eV (kiloelectronvolt). Give your answer in Angstrom (10-10 m, for example, if the answer is 1.6x10-10 m, then write 1.6 as your answer). This should give you a good idea why one can use a crystal lattice with an average interatomic distance of around 10-10 m to observe electron diffraction.
What are “diffraction pattern” and “electron density map.”? Can you please brielfy explain it and what mathematical function relates the two in an X-ray crystallography experiment?
At room temperature, the diffractogram of a cubic material with lattice parameter of 10Å presents a peak at 2θ = 20o. At a higher temperature, the lattice parameter has expanded 20%. Calculate the 2q value of the diffraction peak of the material at the high temperature. λλ is fixed. Do not assume a particular (hkl) set of values, nor a value for λ.
What is the difference between pmos and nmos? What is the difference between pmos and nmos current mirror?
An electron beam, where all electrons have the same energy of 42.5 eV, strikes perpendicularly on the surface of a crystalline material, causing electrons to scatter from the surface atoms. The order of diffraction m = 2 intensity maximum occurs at an angle of 60.6\ deg relative to the surface normal. a) Calculate the distance between atoms in the surface layer. d = b) Are there any other intensity maxima? 1) Yes. 2) No.
PROBLEM For a given x-ray diffraction test (n = 1) on a cubic crystal structure, the recorded diffraction peaks (20) were 24.09°, 34.33°, 42.37°, 49.33°, 55.62°, and 61.48°. The x-ray wavelength used in the test was 0.15418 nm. For this test, determine the crystal structure of the element, the lattice constant, and identify the element.
I need the answer as soon as possible