PROBLEM 2: A glass (SG = 2.6) cylinder 3/16"thick is filled to a depth d with linseed oil(SG=0.92) and allowed to float in a tank ofwater.3- in2in16waterLinseed oil(SC-0.92)4inTo what depth in inches can the glass befilled with linseed oil such that the water willjust reach the brim of the glass?

Answered: Image /qna-images/answer/caa3569f-35bb-4974-a4b0-50445c1af3f8.jpg

PROBLEM 2: A glass (SG = 2.6) cylinder 3/16" thick is filled to a depth d with linseed oil (SG=0.92) and allowed to float in a tank of water. 3 in 2in 16 water Linseed oil (SG=0.92) 4in d To what depth in inches can the glass be filled with linseed oil such that the water will just reach the brim of the glass?

PROBLEM 2: A glass (SG = 2.6) cylinder 3/16" thick is filled to a depth d with linseed oil (SG=0.92) and allowed to float in a tank of water. 3 in 2in 16 water Linseed oil (SG=0.92) 4in d To what depth in inches can the glass be filled with linseed oil such that the water will just reach the brim of the glass?

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter4: Mechanical Processes

Section: Chapter Questions

Problem 4.6P

See similar textbooks

Similar questions

Design Problem, a horizontal separator for the following operating conditions. Gas rate: 15 MMSCFD Gas specific gravity: 0.6 Oil rate: 4,000 bbl/day Oil gravity: 40 API Operating pressure: 1000 psi Operating temperature: 60F Retention time: 3min Droplet size removal: 120 µm d Liquid Leff 20 24 30 36 42 46 No 2 Gas Leff LISS Hg=0.013 CP Pg=3.708 lb/ft³ Po= 53.03 lb/ft³ Z=0.84 SR 15 marks)
A glass (SG = 2.6)cylinder 3/16” thick is filled to a depth d with linseed oil (SG=0.92) and allowed to float in a tank of water. To what depth in inches can the glass be filled with linseed oil such that the water will just reach the brim of the glass?
Civil
Consider the following statementsProper use of internal vibrators include Vibrators can be used to move concrete horizontally To avoid the internal effects of bleeding, the vibrator should penetrate to the bottom of the layer and at least 150 mm into any previously placed layer The distance between insertions should be about 1 ½ times the effective radius of the vibrator To speed up the compaction, Internal vibrators can touch the reinforcing bars of the element but not the formwork. Of these statements Select one: A. All statements (1-4) are correct B. 2 and 3 are correct C. 2 and 4 are correct D. 1 and 3 are correct
Problem 6: What is the gage pressure [in psi] ... 5° Water Air Oil (SG=0.8)
please! Badly need help with these one.
6. A commeIcial laundry is considering constructing an ion exchange process to remove hardness from the water. The flow required is 1000 m/day and they use city water which contains 200 mg/1 as CaCO3 of calcrum and 100 mg/1 as CaCO3 of magnesium. Total hardness should be reduced to 80 mg/1 as CaCO3. The resin has a Total Hardness (TH) capacity of 60 kg TH/m' of media and the recommended hydraulic loading rate is 0.5 m/min-m2. (a) What is the water flow rate (m/d) that need to be treated ? (b) What is the total daily resin volume (m') required to soften the water? And (c) What is the area of exchanger bed needed.
Inlude fbd
The process of holding up waste water from industries dumped in batches to avoid shock loads is called?
Describe the Piston Sampler.
7. A commercial laundry is considering constructing an ion exchange process to remove hardness from the water. The flow required is 1000 m/day and they use city water which contains 200 mg/l as CaCO3 of calcium and 100 mg/l as CACO3 of magnesium. Total hardness should be reduced to 80 mg/l as CaCO3. The resin has a Total Hardness (TH) capacity of 60 kg TH/m³ of media and the recommended hydraulic loading rate is 0.5 m/min-m2. (a) What is the water flow rate (m/d) that need to be treated ? (b) What is the total daily resin volume (m') required to soften the water? And (c) What is the area of exchanger bed needed.
Describe about the Flat-blade dilatometer testing.