Please choose the correct answer about scrubber systems on ships.

A simplified diagram of the propulsion for GOES-R, a weather satellite in GEO is shown. This is a  ______ liquid propellant system that uses a  ______ system to maintain the pressure in the fuel and oxidizer tanks.

All of the following are true statements about flushing an A/C system after a compressor failure, except The condenser must be flushed and the receiver/ dryer replaced. Filter screens are sometimes located in the suction side of the compressor and in the receiver/dryer. These screens confine foreign material to the compressor, condenser, receiver/dryer, and connecting hoses. Use only CFCs for flushing. After the system has been flushed, be sure to oil all components that require it. Some manufacturers recommend replacing the clogged components and installing a liquid line (inline) filter just ahead of the expansion valve or orifice tube instead of flushing the system.

One of the type of Tunnel washers is URE b GL Top transfer Forward tilt Side load Auto carte transfer

Technician A says that the oxygen sensor provides the major input during the open-loop mode.technician B says that the coolant temperature  sensor input is not used during open loop mode operation. Who is correct?

Explain the function and operation of a variable engine cooling pump (10 - 20 words)

Technician A says that the oxygen sensor provides the major input during the open-loop mode. Technician B says that the coolant temperature sensor input is not used during open-loop mode operation. Who is correct?

True or False: Entering-air temperature and water temperature are the main factors determining the amount of ice produced in an air-cooled ice machine.

Which type of dewpoint analyzer relies on measuring the electrical conductivity of a hygroscopic material? Nuclear solids moisture analyzer NIR moisture analyzer Microwave moisture analyzer Dew cell

I need the real handdrawing complete it by adding these :  Pneumatic Valves Each linear actuator must be controlled by a directional control valve (DCV) (e.g., 5/2 or 4/2 valve). The bi-directional motor requires a reversible valve to change rotation direction. Pressure Regulators & Air Supply Include two pressure regulators as per the assignment requirement. Show the main compressed air supply line connecting all components. Limit Switches & Safety Features Attach limit switches to each actuator to detect positions. Implement a two-handed push-button safety system to control actuator movement. Connections Between Components Draw air supply lines linking the compressor, valves, and actuators. Clearly label all inputs and outputs for better understanding.