NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A textile plant requires 4 kg/s of saturated steam at 2 MPa, which is extracted from the turbine of a cogeneration plant. Steam enters the turbine at 8 MPa and 500°C at a rate of 11 kg/s and leaves at 20 kPa. The extracted steam leaves the process heater as a saturated liquid and mixes with the feedwater at constant pressure. The mixture is pumped to the boiler pressure. Assume an isentropic efficiency of 88 percent for the pumps and 84 percent for the turbine. Boiler Pump II Process heater- kw Turbine Condenser Pump I Determine the net power output. (You must provide an answer before moving on to the next part.) The net power output is

NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A textile plant requires 4 kg/s of saturated steam at 2 MPa, which is extracted from the turbine of a cogeneration plant. Steam enters the turbine at 8 MPa and 500°C at a rate of 11 kg/s and leaves at 20 kPa. The extracted steam leaves the process heater as a saturated liquid and mixes with the feedwater at constant pressure. The mixture is pumped to the boiler pressure. Assume an isentropic efficiency of 88 percent for the pumps and 84 percent for the turbine. Boiler Pump II Process heater- kw Turbine Condenser Pump I Determine the net power output. (You must provide an answer before moving on to the next part.) The net power output is

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q2/ The peak load on a power plant is 60 MW. The loads having maximum demands of 30 MW, 20 MW, 10 MW and 14 MW are connected to the power plant. The capacity of the power plant is 80 MW and the annual load factor is 0.5. Estimate: a- The average load on the power plant. b- The energy supplied per year. c- The demand factor. d- The diversity factor.
4. It is a normal practice to use a pressure reducing device in vapor compression cycle to reduce the pressure of liquid refrigerant. An expansion engine could be used to expand isentropically saturated liquid refrigerant 12 from 40°C to the evaporator temperature of -5°C instead of pressure of pressure reducing device. Determine the following: a) Network in expansion engine b) Network in expansion valve c) % saving in network of the cycle per kilogram of the refrigerant
2. An internally reversible heat engine operates between intake and heat release temperatures between 627 and 27 °C. Part of the work generated by the heat engine is used to move an internally reversible refrigeration machine that works between temperatures of 27 and -23 °C. The heat supplied to the engine is 2100 kJ and the net work output (the work of the engine minus that consumed by the refrigerating machine) is 500 kJ. Determine a) The heat transferred to the refrigerating machine at -23°c b) The net heat transferred at 27 °C
A) With a neat sketch discuss the working of a Grid-connected system for power generation and explain the functions of important components of this system?
What are the work and energy equations ?
3. An automobile engine delivers 25hp to the driveshaft with the thermal efficiency of 30%. The fuel has a heat content of 40 000kJ/kg. Calculate the rate of fuel consumption (kg/hr) and the heat rejected (kW) through the radiator and exhaust.
Write the energy balance for the described control volume
26.) Nitrogen with a mass of 3.82 kg expands at constant pressure. The initial pressure and temperature in the piston-cylinder system are 172 kPa and 23°C, respectively. Because of the heat transfer, the system reached a final temperature of 206.2°C. Compute for the work in kJ.
b) A heat engine operates between two reservoirs at 800° C and 20° C. One-half of the work output of the engine is used to drive a Carnot heat pump that removes heat from the cold surroundings at 2° C and transfers heat to a house maintained at 22° C. If the house is losing heat at a rate of 62,000 kJ/h, determine the minimum rate of heat supply to the heat engine required to keep the house at 22° C.
13
The temperature inside a house is maintained to 28 °C using a heat pump with a coefficient of performance of 7.0. Calculate the temperature outside the house.
3.5 A novel heat engine is being considered for producing work from the thermal energy contained in the wastewater discharge from a large food-processing plant. On an average day, 35 ° C wastewater leaves the plant and is discharged into the ocean at 1,000 gallons per minute. If the average annual ocean temperature is 10 ° C at that location, what is the maximum power that could be produced by this heat engine? What would be the thermal cycle efficiency of your maximum power engine? You can assume that the heat capacity of water at constant pressure is constant at 4,200 J/kg K.