Note: Give me right solution according to the question. If any data missing assume that. A wheel applies 40 kN load on a semi-infinite elastic space as shown in Figure. The modulus of elasticity of the material is 150 MPa and the Poisson’s ratio is 0.38. Assume the load is applied on the surface as a concentrated force. The vertical deformation at a depth of 500 mm at the centerline of the wheel is most nearly: 0.64 mm 0.07 mm 0.41 mm 0.26 mm

Q: 1. A solid shaft ABCD of diameter d is fixed at A and subjected to torques applied at equally spaced…

A: Since, we answer only three sub-parts at a time so we will answer the first three sub-parts. Please…

Q: The stresses shown act at a point in a stressed body. The stress magnitudes are S, = 90 MPa and S, =…

A:

Q: A thin rectangular plate ABCD is deformed into a parallelogram as shown in the figure below. The…

A: Shear strain is the ratio of displacement to an object's original dimensions due to stress, and is…

Q: A pressurized cylindrical tank with flat ends is loaded by torques T and tensile forces P (see…

A: Given, r = 141 mm t = 6.5 mm p = 7.25 MPa T = 810 Nm

Q: 3. A homogeneous bar with a cross-sectional area of 400 mm² is attached to fixed supports as shown…

A:

Q: The stresses shown act at a point in a stressed body. The stress magnitudes are S, = 80 MPa and S, =…

A: Given data in question  Normal stresses on element Angle To find out  Normal and shear stress on…

Q: A stress element is subjected to bi-axial loading as shown in figure. 30 30° www. 30⁰ What will be…

A: For a given element,To find  the maximum principal stress for the given stress element

Q: At the limit of proportionality, a bar 30 mm wide (w) and 12 mm thick (t) elongates 2.0 mm under an…

A:

Q: The stresses shown act at a point in a stressed body. The stress magnitudes are Sy = 100 MPa and Sy…

A:

Q: A thin rectangular plate ABCD is deformed into a parallelogram as shown in the figure below. The…

A:

Dependence on mechanical properties

The mechanical properties of materials are those structures that include the reaction to the load used. Metal switching features determine the scope of the usefulness of the content and establish the expected service life. Machine structures are also used to help distinguish and identify material objects. The most common mechanical properties considered are strength, ductility, stiffness, impact resistance, and resilience to fractures.