Answered: Normal force (lb) Shear force at…

Engineering

Civil Engineering

Normal force (lb) Shear force at failure (Ib) 50 43.5 110 95.5 150 132.0

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A series of direct shear tests were conducted on a sample of soil in a 60 mm square shear box. The table below shows the results that were obtained at failure. Plot the graph of shear stress at failure against normal stress anddetermine the strength parameters of the soil. Normal Load (N) 200 300 400 Shear Load (N) 105 142 180
A direct shear test is performed on a soil sample with two different loads. In the first test, a normal stress of 55kPa is applied and the soil fails at a shear stress of 35kPa. In the second test, the soil failed at shear stress of 47kPa when a normal stress of 75 kPa was applied. Determine the values of internal friction angle and cohesion of the given soil sample.
A consolidated-undrained tri-axial was conducted on a normally consolidated clay sample and the results are as follows: chamber confirming pressure = 107 kPa, Deviator stress at failure = 95 kPa, Pore Water Pressure = 50 kPa. these results were used to determine the drained friction angle of the soil. Compute the deviator stress in kPa at failure when the drained test was conducted with the chamber confirming pressure changed to 160 kPa
x 18 The effective shear strength equation (S = T₁ = 25+5 tam 30); expressed for a saturated clayey soil. In undrained test on a sample of the same soil using the shear box apparatus, the following data at failure were recorded :. Shear Stress = 90 kPa a) What and Normal stress = 180 kPa pore water pressure in the specimen at time of was the failure (assume Øu= 0). Find the Unconfined compressive strength (Od max) for the same soil an Unconfined. when tested in Compression test. c) Find the major principal stress when a sample of the same soil is tested in Ul test with confining pressure of (200 kPa).
Two undrained triaxial tests were conducted on soil specimen, and they gave the following results: Sample Confining Pressure Deviator Stress A 350 kN/m² B 500 kN/m² 150 kN/m² 300 kN/m² The shear strength of sample A in the plane of it's normal stress is A 588 kPa B 283 kPa C 730 kPa D 165 kPa Correct Option
(a) A sample of dry sand is tested in direct shear. Under an applied normal stress of 4,800 psf, the sample falls when the shear stress reaches 3,100 psf. What is the angle of internal friction for this soil?(b) A second sample of the same sand material is also to be tested in direct shear, but the applied compressive loading will be 3,500 psf instead of 4,800 psf. What shear stress is expected to fail the sample?
a sample of dry sand is tested in direct shear. the shear box holding the same has a circular cross section with a diameter of 50 mm. The normal compressive load imposed is 200N. The sample shears when the shear force is 120N. Compute the Normal stress, Shear test at failure Angle ofninternal friction of this soil.
Direct shear tests were performed on a dry, sandy soil. The size of the specimen was 50 mm x 50 mm x 20 mm. Tests results were as given in the table. Find the shear stress parameters
In Triaxial test, which of the following parameters do not need to be recorded the confining pressure specimen diameter changes ) the generated pore pressure the axial force A Triaxial test was performed on a dry, cohesionless soil. If the sample failed vhen the minor principal stress was half of the major principal stress, the soil's angle of internal friction is: O 22.5 19.5 33.3 O 25 A technician obtained a soil void ratio of 1.5. It is okay because it is possible to measure void ratio values above 1. True False |
A sample of sand is sheared in the following manner. First an all around normal stresso 350 kPa is applied to the sample. Next a shear stress is applied to the horizontal pia while the normal stress remains constant. The shear stresses at failure are + 186 kPa. Ihe initial stress and stress condition at failure are shown below 350 kPa 350 kPa 186 kPa 350 kPa 350 kPa ー550 kPa 550 kPa 186 kPa 350 kPa 350 kPa Initial Conditions At Failure Determine the Following: fo A) Assuming c, = 0, draw a failure envelope for the soil. Define the friction angle ( the soil. B) Draw the Mohr's Circle at failure for the test. C) Show the location of the pole. D) Define the maximum and minimum principal stresses at failure. E) Define the normal stress corresponding to the maximum shear stress
A sand sample is subjected to direct shear testing. Two tests areperformed. For test 1, The sample shears at a stress of 2500 psf whenthe normal stress is 4000 psf.Test 2, The sample shears at a stress of 3500 psf when the normalstress is 6000 psf. Determine the following:a) Angle of Internal frictionb) Value of cohesionc) Compute the shear stress at a depth of 12 ft. if the unit weight ofthe soil is 150 pcf
A soil specimen is subjected to a tri – axial test. The soil specimen is cohesionless. If the shear stress that causes failure is 300 kPa. and the normal stress at failure is only 500 kPa 5. Determine the angle of shearing resistance in degrees 6. Determine the angle that the failure plane measured from the major principal plane. 7. Determine the total axial stress in kPa at which failure is expected to occur.