Modified True or False: Write TRUE if the statement is valid and FALSE if otherwise. If the statement is FALSE, underline the word(s) that make it wrong. 1. The distribution system disconnects the transmission system to the customer's household. 2. The step-up transformer is designed to increase the voltage from the primary winding to the secondary winding. 3. Transmission lines have a smaller cross-sectional area to allow a large amount of current to pass through. 4. Electricity is not generated or produced by turning or rotation of turbines. 5. Electricity is produced in the power plants, transmitted at high current and voltage in transmission substations, passed through the distribution substations, then finally distributed to business and residential areas.

Modified True or False: Write TRUE if the statement is valid and FALSE if otherwise. If the statement is FALSE, underline the word(s) that make it wrong. 1. The distribution system disconnects the transmission system to the customer's household. 2. The step-up transformer is designed to increase the voltage from the primary winding to the secondary winding. 3. Transmission lines have a smaller cross-sectional area to allow a large amount of current to pass through. 4. Electricity is not generated or produced by turning or rotation of turbines. 5. Electricity is produced in the power plants, transmitted at high current and voltage in transmission substations, passed through the distribution substations, then finally distributed to business and residential areas.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

5. Explain why two parallel wires carrying currents in opposite directions repel each other.
Q1.) A magnetic circuit has a mean length of 0.80 m. a cross-sectional area of 0.06 m^2 and a relative permeability of 2167. Connecting its 340-turn 64 ohm magnetizing coil to a DC circuit causes a 56-V drop across the coil. Determine the flux density in the core.
The daigram shows a coil connected to a voltage source. When the switch is closed, current flows through the coil creating a magnetic field inside the coil. The field polarized ends A and B to be north pole and south pole of the coil. This phenomena is called. A. Inductance B. Mutual inductance C. Self-inductance D. Magnetic inductance
When does electromagnetic induction occur in a coil of wire? Select one: a. When there is a change in the electric field b. When there is a change in the magnetic field c. When there is a change in the voltage of the coil d. When there is a change in the polarity of the coil
1. A generator has a 400 turns coil that is 10 cm long and 12 cm wide. The coil rotates at 8 rev/s in a 0.10-T magnetic field. Calculate the generator’s peak voltage. Use the formula: ∑ =(NBA2πf) sin 2πft
b. If a transformer supplies a (0+ 55) V output from a 220 V alternating current, find the following: i. The turns ratio required for transformer coils, and ii. The number of turns wound in the secondary coil, if the primary coil has 2500 turns.
A transformer has a primary coil with 100 turns and secondary coil with 250 turns. The input voltage is 150V and runs at 1500 Watts. Power in the secondary is calculted to be? choose one correct answer with the correct units of measure. A. 10 V B. 1500 V C. 10 Watts D. 1500 Watts
Magnitude and direction of an induced emf may be obtained by applying a. Faraday's law, b. Ampere's law c. Lenz's law d. Kirchhoff's 2nd law O (a) and (b) O (b) and (d) O (b) and (c) O (a) and (c)
7-
1. What will happen to the voltage if there are more turns on the primary coil than the secondary coil? 2. What will happen to the voltage if there are less turns on the primary coil than the secondary coil? 3. What is the difference between step-up transformer and step-down transformer? 4. What is the common use/application of step-up transformer and the step-down transformer in our daily life?
Which of the following statements is true for a step-down transformer? Select two answers. a. Primary voltage is higher than secondary voltage. b. Primary voltage is lower than secondary voltage. c. Primary current is higher than secondary current. d. Primary current is lower than secondary current.
In this lab, you learned that if a coil is connected to a DC source, the moment we turn on the switch the current going through the coil will be____. a. non-zero b. zero c. can be either or