Methane and air are fed into the oxidation reactor at the conditions of temperature of 25 °C and pressure of 2 bar. Molar flow rate for methane is 100 kgmoleh while molar flow rate for air is 260 kgmole/h. Composition of Nitrogen and Oxygen in the air feed is 0.79 and 0.21, respectively. Some products leave the top of the reactor as vapor while some products leave the bottom of the reactor as liquid. The ratio of compositions of product at top and bottom reactor is 1.1. There are two reactions involved. Reaction I will proceed first with 40% conversion of methane to carbon oxide and hydrogen followed by reaction 2 with 60% conversion of methane to carbon dioxide and hydrogen. Methane is the limiting reactants and will be used up at the end of the reaction. Calculate the flow rate and composition of all the components in the vapor

Q: 4. A total of 200 mol/s of a liquid mixture with 40 mol% benzene and 60mol % toluene is fed to a…

A:

Q: An iron-carbon alloy initially containing 0.255 wt% C is exposed to an oxygen-rich and virtually…

A: Given data: Initial concentration of C = 0.255 wt % Surface concentration = 0.0 wt % Temperature =…

Q: A mixture of 70% Benzene and 30% Water enters distillation column #1 at a rate of 200 kg/h. One…

A:

Q: 1. Calculate the temperature change for each reaction. 2. Calculate the energy released, in kJ, for…

A:

Q: 4. A waste mixture of 50% xylene (C8H10), 40% toluene (C7H8) and %10 water is to be combusted in a…

A: The mass flow rate of the mixture, m = 500 kg/h Mass composition of the mixture, 50% xylene (X), 40%…

Q: A combustion process involves gaseous sulfur hexafluoride (SF6) and liquid lithium (Li). Determine…

A: At very low pressure  and at  temperature, a combustion process is done between gaseous and liquid…

Q: Question 3: Ethane at 25 °C and 1.1 atm (abs) flowing at a rate of 100 mol/s is burned with 20%…

A: Ethane gas is burned with oxygen.

Q: Please show every step you used to solve each problem. A vapor mixture of 100 mol/s comprising 55…

A: Taking the values from previous answer

Q: 50% by mass NaOH was diluted to 10% by the addition of water. The temperature of the 50% by mass…

A: Given: 50% at 65.6 °C by mass NaOH was diluted to 10% at 37.8 °C Enthalpy change by using NaOH/H2O…

Q: A continues fractionation column, operation at atmospheric pressure, is to be designed to separate a…

A: Given : A mixture of CS2 and CCl4 is separated in a distillation column.Mixture containing Overhead…

Q: An iron-carbon alloy initially containing 0.308 wt% C is exposed to an oxygen-rich and virtually…

A: Given:D=5.5×10-10m2sC0=0.308%Cs=0%Cx=0.231%t=6 h=21600 s

Q: F2 gas and excess iodine solid are heated together at high temperatures.  The iodine sublimes and…

A: Given, I=2.5g,  No. of moles of I=2.5/Atomic mass of I=2.5/127 moles No. of moles of I=0.019685…

Q: Chemical Engineering Calculation All questions are interconnected, allowed by bartleby.    PROBLEM…

A:

Q: Consider the pair of reactions in which ethylene is oxidized either to ethylene oxide (desired) or…

A: a) To determine the number of degrees of freedom of the process, we use the Gibbs phase rule, which…

Q: Q2. Consider a fuel which is an equimolar mixture (1 mole each) of propane (C3Hs) and methane (CH4).…

A: Given that, The number of moles of propane C3H8 in the fuel = 1 mol The number of moles of methane…