Large-scale integrated (LSI) circuit chips are made in one department of an electronics firm. These chips are incorporated into analog devices that are then encased in epoxy. The yield is not particularly good for LSI manufacture, so the AQL specified by that department is 9% while the LTPD acceptable by the assembly department is 32%. Assume the company is willing to accept a consumer's risk of 10 percent and a producer's risk of 5 percent. a. Find the sample size. Use Exhibit 10.16. Note: if the exact value of the computed LTPD/AOQ ratio does not appear in Exhibit 10.16, use the next higher ratio. (Round up your answer to the next whole number.) Sample size b. How would you tell someone to do the test? Randomly sample LSI using the sample size from part a, the lot if more than defective.

Large-scale integrated (LSI) circuit chips are made in one department of an electronics firm. These chips are incorporated into analog devices that are then encased in epoxy. The yield is not particularly good for LSI manufacture, so the AQL specified by that department is 9% while the LTPD acceptable by the assembly department is 32%. Assume the company is willing to accept a consumer's risk of 10 percent and a producer's risk of 5 percent. a. Find the sample size. Use Exhibit 10.16. Note: if the exact value of the computed LTPD/AOQ ratio does not appear in Exhibit 10.16, use the next higher ratio. (Round up your answer to the next whole number.) Sample size b. How would you tell someone to do the test? Randomly sample LSI using the sample size from part a, the lot if more than defective.

Name: exhibit 10.16Excerpt from a Sampling Plan Table for a = 0.05, B= 0.10
Uploaded: 2024-03-20T07:06:41.000Z
Channel: Bartleby
Description: exhibit 10.16Excerpt from a Sampling Plan Table for a = 0.05, B= 0.10LTPD/AQLn* AQLLTPD/AQLn * AQL44.8900.0523.5492.61310.9460.3559.3.2063.2866.5090.8182.9573.9813.4.8901.3668.2.7684.6954.0571.9709.2.6185.4264. Large-scale integrated (LSI) circuit c

MATLAB: An Introduction with Applications

6th Edition

ISBN:9781119256830

Author:Amos Gilat

Publisher:Amos Gilat

Chapter1: Starting With Matlab

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

9. State the null hypothesis and the alternative hypothesis for this situation: "The level of a pollutant in a river adjacent to a chemical plant is regularly monitored. Over a period of years, the normal level of the pollutant of 0.5 ppm has been established by chemical analyses. Recently, the company has made several changes to the plant that appear to have increased the level of the pollutant. The company wants proof that the pollutant level has not increased." 10. State the null hypothesis and the alternative hypothesis for this situation: "Sewage and industrial pollutants dumped into a body of water can reduce the dissolved oxygen concentration and adversely affect aquatic species. In one study, weekly readings are taken from the same location in a river over a two-month period. The mean dissolved oxygen obtained from the analysis is 4.5 ppm. Some scientists think that 5.0 ppm is a dissolved oxygen level that is marginal for fish to live. They want to proof whether the mean…
p paras Michelin is considering going "lights-out" in the mixing area of the business that operates 24/7. Currently, personnel with a loaded cost of $480,000 per year are used to manually weigh real rubber, synthetic rubber, carbon black, oils, and other components prior to manual insertion in a Banbary mixer that provides a homogeneous blend of rubber for making tires (rubber products). New technology is available that has the reliability and consistency desired to equal or exceed the quality of blend now achieved manually. It requires an investment of $1,900,000, with $75,000 per year operational costs and will replace all the manual effort described above. The planning horizon is 8 years, and there will be a $180,000 salvage value at that time for the new technology. Marginal taxes are 25%, and the after-tax MARR is 10%. The new investment relates to the 7-Year Property Class. Click here to access the TVM Factor Table Calculator Click here to access the MACRS-GDS table. Part a Your…
An engine health monitoring system consists of a primary unit and a standby unit. The MTTF of the primary unit is 1000 operating hours and the MTTF of the standby unit is 333 hours when in operation. There are no failures while the backup unit is in standby. If the primary unit may be repaired at a repair rate of 0.01 per hour, while the standby unit is operating, estimate the design life for a reliability of 0.90.-
A drug has a half life of 30 hours. The drug is administered via injections, which can be somewhat painful. Therefore it's decided to given an injection every 3 days. Toxicity sets in if over 200 mg of the drug is present in the bloodstream at any one time. You are in charge of setting the dosage. What is the appropriate dosage for which these is no possibility of toxicity? Answer with the largest acceptable such dosage, to the nearest 0.1 mg.
it's urgent please
In the process of producing engine valves, the valves are subjected to a first grind. Valves whose thicknesses are within the specification are ready for installation. Those valves whose thicknesses are above the specification are reground, while those whose thicknesses are below the specification are scrapped. Assume that after the first grind, 70% of the valves meet the specification, 20% are reground, and 10% are scrapped. Furthermore, assume that of those valves that are reground, 90% meet the specification, and 10% are scrapped. a) Find the probability that a valve is ground only once. b) Given that a valve is not reground, what is the probability that it is scrapped? c) Find the probability that a valve is scrapped. d) Given that a valve is scrapped, what is the probability that it was ground twice? e) Find the probability that the valve meets the specification (after either the first or second grind). f) Given that a valve meets the specification (after either the first or…
A clinical trial is being conducted in order to determine the efficacy of a new drug that will be used to treat Crohn’s disease. The efficacy of the medication will not only be determined by the physical improvement of symptoms but will also be determined by using a blood test to examine the concentration C-reactive protein (an inflammatory marker) in an individual’s blood. If the researcher wants a margin of error for the level of C-reactive protein to be less than or equal to 2.9 mg/dL and the standard deviation for C-reactive protein concentrations among Crohn’s disease patients was previously documented at 10.1 mg/dL, how many patients should be recruited for each group of individuals in the study, assuming a 95% confidence interval will be used to quantify the mean differences between the control group and the treatment group?
Polychlorinated biphenyl is among a group of organicpollutants found in a variety of products, such as coolants
9
A new analytical method to detect pollutants in water is being tested. This new method of chemical analysis is important because, if adopted, it could be used to detect three different contaminates - organic pollutants, volatile solvents, and chlorinated compounds - instead of having to use a single test for each pollutant. The makers of the test claim that it can detect high levels of organic pollutants with 99.6% accuracy, volatile solvents with 99.91% accuracy, and chlorinated compounds with 89.4% accuracy. If a pollutant is not present, the test does not signal. Samples are prepared for the calibration of the test and 60% of them are contaminated with organic pollutants, 27% with volatile solvents, and 13% with traces of chlorinated compounds. A test sample is selected randomly. (a) What is the probability that the test will signal? (b) If the test signals, what is the probability that the chlorinated compounds are present? Carry out all calculations exactly, then round the final…
Air pollutants common in U.S. cities include fine particulate matter (PM) and ozone (O3). PM is measured as “inhalable” particles 10 micrometers in diameter or “fine inhalable” particles 2.5 micrometers in diameter. Suppose that studies show, for a particular region, that cities exceed PM2.5 standards 20% of the time and exceed ozone standards 10% of the time. Assume that PM2.5 and ozone measurements are statistically independent. A) Determine the probability that a city, selected at random, exceeds one of the standards. B) If a city exceeds the standards, what is the probability that it exceeds only the PM2.5 standard?
A factory produces furniture as the main product. One of the major components of the furniture product is a steel bar with the specification of the length at 1,250 mm with +/- 10% tolerance. Based on historical records, the average demand for steel bars is 1,000 units per month. The factory receives two quotation prices from two independent suppliers along with the quality control records from their production process of the steel bars as below: (refer to table image) Anticipating that a portion of the steel bars delivered will fall outside the specification limits, the factory is prepared to cut steel bars that are too long, while those that are too short will have to be discarded. Based on the above information, answer the following questions: a. Provide your assessment on the capabilities (based on their capabilities index) of the two suppliers as well as their estimated percentage of defective products against the factory’s specification of the steel bars. b. Which of the two…