Answered: In milling operation, the cutting speed…

In milling operation, the cutting speed is 150 m/min with a tool of 12 mm diameter. What is the right spindle speed rpm for this operation? (Choose the most close to your calculated value)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: How much machining tin 58 mm over a length of approach length and ow

A: Machining Time

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

Q: A drilling operation is performed to create a through hole on a steel plate that is 20 mm thick.…

Q: A motorised metal guillotine machine is required to cut 45 mm diameter hole in a plate of 20 mm…

A: Given, Diameter of hole, d=45mmThickness of plate,t=20mmTorque,T=7Nm of sheared areaCutting…

Q: 45) Find the RPM for turning a 1 1/4 inch shaft on a lathe with the material having a cutting speed…

Q: A turning operation is performed using a rake angle of 15degree. Cutting conditions are, feed= 0.30…

Q: A 4"x 8" cast steel plate is to be machined using a milling cutter with 8 inserts. The operation is…

A: Given dataD=8inchV=350sfpm=350×39.37=inch/minf=0.015inch/totthl3=0.18inchz=8 ***as per our company…

Q: Note: All dimensions are in mm Ø 34 7. 3.) A 34 mm diameter x 120 mm shafting will be turned using a…

A: Given:- Dinitial=34 mm,Dfinal,Rough=31 mm,Dfinal,Finish=30 mm,L=50 mm,rough turn:-V=30 mmin,depth of…

Q: Q24. For the below figure please write its part program. The depth of the cut is 0.25 inches…

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 49 mm for an…

A: there are 4 subparts posted above.As per honor code and answering guidelines I can answer 1st three…

Q: wo identical cylindrical jobs are turned using (a) a round nosed tool of nose radius 2 mm and (b) a…

A: Given:feed, f=0.08nose radius, r=2 mm

Q: In machining operation, if velocity doubled then the tool life reduced to 1/16 th of initial value…

A: Givenvelocity get double of initial velocitytool life reduced to 116of initial value

Q: The rotatory speed of the cutting tool and the feed rate of the workpiece depend upon the type of…

Q: Given that the length of a work-piece made from copper alloy to be face-milled is 250 mm and the…

A: Given : L = 250 mm D = 150 mm z = 10 To find : Cutting speed and feed

Q: MI Match column A with Column B (Return this page with your answer shcet) No 1 Column A No A Column…

A: given; match with column A to column B.

Q: )Find the cutting speed in meter/minute for a step milling operation by 22mm end mill with a spindle…

A: Given d=22mm=0.022m spindle speed N=210rpm

Q: It is required to reduce the thickness of cast iron workpiece with dimensions (L x w x t) of (230 mm…

Q: Calculate the spindle speed (rpm) for turning operation when the cutting speed is 186.00 m/min and…

A: Find the spindle speed Cutting speed = 186 m/sec External diameter = 38.50 mm

Q: A two-spindle drill cuts two holes at the same time, one 1/2 inch and one 3/4 inch. The workpiece is…

Q: Find the cutting speed in meter/minute for a step milling operation by 22mm end mill with a spindle…

Q: In CNC lathes, to maintain constant cutting speed when feeding of the tool from the circumference to…

A: Option b is correct.

Q: The face milling cutter of D = 200 mm used to cut a block which is 200 mm = H, 1=480 mm, if f- 0.7…

A: Machine time is the ratio of length divided by cutting speed. Here, Length = length of block +…

Q: Find the cutting speed in meter/minute for a step milling operation by 22mm end mill with a spindle…

A: Given D = 22 mm = 0.022 m Speed, N = 260 rpm

Q: an rpm that will produce the desired surface cutting speed of 125 fpm. The cutter diameter is 3 in.…

A: Given data: Surface cutting speed, u=125 fpm Feed per teeth, fz=0.006 in./tooth Cutter diameter,…

Q: A cylindrical mild steel work piece of Ø55 X 200mm undergoes a turning operation on a lathe machine…

A: Given data Diameter of work piece = 55 mmLength of work piece = 200 mmFinal diameter = 45 mmCutting…

Q: In a turning operation, the workpiece diameter is Dm-40.00 mm and the diameter after the operation…

A: GIVEN DATA - D=40mm D2=24mm V=132m/min f=0.03mm/rev WE HAVE TO CALCULATE MRR

Q: In CNC lathes, to maintain constant cutting speed when feeding of the tool from the circumference to…

A: Cutting speed can be defined as the material that moves past the edge of the cutting tool.

Q: describe in detail how to “tram” the tool head of a manual vertical milling machine. in other words,…

A: TOOLS FOR TRAMMING A dial indicator for measuring minute deflection between the two surfaces is a…

Q: A cylindrical workpiece has a 14.0 in diameter and has 30 in long. It is to be turned in an engine…

Q: The workpiece of size o 50 mm x 90 mm length is to be reduced to o 42 mm x 85 mm. If the depth of…

A: We have provided data from the question, Initial diameter= 50 mm; Initial length= 90 mm Final…

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

A: for solution refer below images.

Q: A motorised metal guillotine machine is required to cut 45 mm diameter hole in a plate of 20 mm…

Q: A surface of 43 mm x 246 mm will be machined by using a shaper and 7 mm deep stock will be removed…

A: Given,

Q: Program the motion of cutting tool from point 1 to point 2 according scheme below, in absolute…

A: Write the absolute programming for CNC lathe, using the radius programming.

Q: A mild steel specimen of Initial diameter of 30.5 mm is turned to final diameter of 27 mm for an…

A: Turing is a material removal operation in which the diameter of the workpiece is reduced. It…

Q: g device can be used to precisely rotate a workpiece to a specific angle, positioning it a are a few…

A: given: On a milling machine. what work-holding device can be used to precisely rotate a ‘workpiece…

Q: In a lathe machine, the maximum torque transmitted by a shaft exceeds the mean torque by 18 %. A…

A: Given, P=3 kW=3×103 WN=625 rpmTmax=1.18Tm

Q: part program

A: Firstly, the drill point will be set at a target point location at x = 0, y = 0,and z = + 10. The…

Concept explainers

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.

Question

In milling operation, the cutting speed
is 150 m/min with a tool of 12 mm
diameter. What is the right spindle
speed rpm for this operation? (Choose
the most close to your calculated
value)
4500
O 3980
3700
4200

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Given data

VIEW

Detailed solution

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A cylindrical rod is machined using turning processes. It is given that the cutting speed is 120min ¹, and feed per tooth is 0.0025 m/min. The outer diameter is 35mm, the length of the rod is 130m and the inner diameter is 22mm. The number of teeth is 6. Find Rotational speed, Feed rate, Machining time, and Depth of cut.
Please don't provide handwritten solution...
Dont keep asking for a clear pic. This is what i have. And the data is conplete. Solve it using given data itself.
Machining time required reduce a mild steel rod of diameter 60mm, initial length (L) 125mm to final length (L1) 120mm to 58 mm by turning a carbide insert. If the approach length and over run length are 5 mm and 1 mm respectively, take Cutting speed as 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm
None
Calculate the spindle speed (rpm) for turning operation when the cutting speed is 107.00 m/min and external diameter is D44.00 mm? (Two decimal places; Don't input units.) Your Answer: Answer
What is the feed speed (mm/min) of an end milling cutter if it mills a distance of 300 mm in ten minutes? What is the feed per tooth if it is rotating at 800 rpm?
To facilitate the milling (roughing) work of a cast steel material using a 1.5 inch diameter cutter choose between the two available stock. Find the speed of the cutter in rpm. – high speed steel cutter with a cutting speed of 50 fpm or – carbide tipped cutter with a cutting speed of 200 fpm.
How much machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm by turning using a carbide insert. If the approach length and over run length is = 5 mm, Cutting speed is 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm D
For the operation of straight turning in a lathe machine, the diameter of the workpiece is 80 mm, the length is 0.12 m, the cutting speed is 80 m / min, the feed is 0.5 mm / rev and the depth of cut is 0.002 m . Find the material removing rate and the time of machining.
b) A mild steel having length of 350mm and diameter of 12.5 cm, is being reduced to diameter 9.5 cm, for the length of 22cm by turning on lathe, with a spindle speed of 250rpm. Assume feed (f) 2.5 mm/rev and 2 passes to complete the turning operation. Write the formula and calculate (i) Cutting speed (ii) Depth of cut.
Using the formula (below), calculate the revolutions per minute (rpm) a drill press spindle should rotate using a Ø1⁄2 HSS twist drill if the cutting speed will be 90 surface feet per minute, SPM?N~[4xV]÷DN = _____________________________________________ RPM’s