In an adiabatic steady state control volume with two inlets and one outlet,air and CO2 enter separately and are mixed; then, the mixture exits from the outlet. Thetemperature and the pressure of air at the inlet are 305 K and 0.1 MPa and the volumetric flowrate of air is 2 m/s. The temperature and the pressure of CO2 are 400 K and 0.1 MPa. Thetemperature and the pressure of the mixture at the outlet are 320 K and 0.1 MPa. Determine,a) The mass flow rates of air and CO2 at the inletb) The rate of entropy generation

Write the given values along with suitable variables.

In an adiabatic steady state control volume with two inlets and one outlet, air and CO2 enter separately and are mixed; then, the mixture exits from the outlet. The temperature and the pressure of air at the inlet are 305 K and 0.1 MPa and the volumetric flow rate of air is 2 m³/s. The temperature and the pressure of CO2 are 400 K and 0.1 MPa. The temperature and the pressure of the mixture at the outlet are 320 K and 0.1 MPa. Determine, a) The mass flow rates of air and CO2 at the inlet b) The rate of entropy generation

In an adiabatic steady state control volume with two inlets and one outlet, air and CO2 enter separately and are mixed; then, the mixture exits from the outlet. The temperature and the pressure of air at the inlet are 305 K and 0.1 MPa and the volumetric flow rate of air is 2 m³/s. The temperature and the pressure of CO2 are 400 K and 0.1 MPa. The temperature and the pressure of the mixture at the outlet are 320 K and 0.1 MPa. Determine, a) The mass flow rates of air and CO2 at the inlet b) The rate of entropy generation

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A stream of water at 300 kPa and specific volume of 0.2 m³/kg is mixed with another stream (water)…

A: Given Data: The volumetric flow rate of the cold stream, v2=0.3 m3/s

Q: 4-A rigid tank is divided into two compartments by a partition. One compartment contains 3 kmol of…

Q: 6) A mole of monatomic gas initially at 0.83 atm and in thermal contact with the surroundings at 294…

Q: The mass of CO2 is 0.066 kg in a system (with molar mass 44 kg/kmol), occupying a volume of 0.026 m3…

Q: A mixture of gases contains 30% N2, 60% O2, and 10 % CO2 on a mass basics. Mixture pressure and…

A: For solution refer below images

Q: An ideal-gas mixture with 20 kmol of oxygen, 75 kmol of nitrogen and 5 kmol of carbon dioxide enters…

Q: A stream of 50 m3/min of outdoor air at 27°C dry-bulb temperature and 30%RH is adiabatically mixed…

Q: wo streams of air, one at 1 bar, 27°C and velocity of 30 m/s and the other at 5 bar, 227°C and 50…

A: Write the energy balance equation: h1+12v12+h2+12v22-Q=h3+12v32 Rearranging the terms we get,…

Q: An efficiency consultant is studying the power stroke of a four-stroke engine and determines the…

Q: A rigid, well-insulated tank contains a two-phase mixture of ammonia with 0.0025 ft of saturated…

A: The given information in the problem is listed in the following attached image:

Q: The conservation of mass principle for a mixing chamber requires that the sum of the incoming mass…

A: Solution → According to mass conservation principle, mass can not be created…

Q: An industrial dehumidifier accepts 50 kmol/hour of moist air with a dewpoint of 20 degrees Celsius.…

A: From psychrometric chart we have :Inlet air humidity, Y1 = 0.015 Kg water /Kg dry airOutlet air…

Q: In below figure wet air at 30°C and 50% relative humidity enters a dehumidifier operating at steady…

A: The mass of water vapour divided by the mass of dry air in a volume of air at a particular…

Q: Consider 0.75 kg of N2 at 300 K, 1 bar contained in a rigid tank connected by a valve to another…

Q: 1.2 L car engine has four individual cylinders, each one of which holds 0.3 L of fuel + air gas…

Q: An ideal-gas mixture with a mass fraction of 5% hydrogen, 15% helium and 80% nitrogen enters an…

Q: The volumetric analysis of a mixture of gases is 35 percent ethylene and 65 percent ethane.This…

Q: Cp(T):=24.108+2.091 •10¬1.T+2.166•10¬ª.T² – 3.372 • 10-7.T³ (J/mol K)

A: here dh = CpdT, so for h2-h1 take integration of CpdT term from T=350K to T= 450K.for solution refer…

Q: 12. 4 kg/s of a mixture of oxygen and carbon dioxide containing 80% of oxygen by mole, undergoes a…

Q: A perfect gas mixture consists of 4 kg of N2 and 6 kg of CO2 at a pressure of 4 bar and a…

A: Given:mn=4 kgmc=6 kgP=4 barT=25o C

Q: During a mixing process at steady-state, two superheated streams are mixed continuously at a normal…

Q: 13–38 A rigid tank that contains 1 kg of N, at 25°C and 300 kPa is connected to another rigid tank…

Q: Problem 13.067 Piston NOTE: This is a multi-part question. Once an answer is submitted, you will be…

Q: An ideal gas mixture has the following mass analysis is expand adiabatically in a gas turbine from…

Q: Saturated vapor R134a flows through a channel with a volumetric flow rate of 145 m/min at a pressure…

A: Given data: The volumetric flow rate of R134a saturated vapor is 145 m3/min The volumetric flow rate…

Q: 1. A rigid insulated tank is divided into two sections by a membrane. One side contains 1.5 kg-of…

A: As per expert Guidelines, we are supposed to solve only the first three parts of the given…

Q: A perfect gas mixture consists of 4 kg of N2 and 6 kg of CO2 at a pressure of 4 bar and a…

Q: 1. Two tanks are connected by a valve. Tank A contains 2 kg of carbon monoxide gas at 77°C and 0.7…

A: Given, Initially Tank A m1=2 kgT1=770C=350 KP1=0.7 bar=70000 Pa Tank B m2=8 kgT2=270C=300 KP2=1.2…

Q: ure at 21

A: given:

Q: O0158kg. If the specific v 4.Consider a liquid-vapor mixture system, where the specific volume of…

Q: ● What are the LD50 and ED50 for a substance? What do they indicate? I

A: To explain: The LD50 and ED50. Explanation: LD50 and ED50 are terms used in toxicology to describe…

Q: From a conditioned space 6000 cfm of air at 75 F(db) and O =50% are recirculated and mix with 2000…

Question

In an adiabatic steady state control volume with two inlets and one outlet,
air and CO2 enter separately and are mixed; then, the mixture exits from the outlet. The
temperature and the pressure of air at the inlet are 305 K and 0.1 MPa and the volumetric flow
rate of air is 2 m/s. The temperature and the pressure of CO2 are 400 K and 0.1 MPa. The
temperature and the pressure of the mixture at the outlet are 320 K and 0.1 MPa. Determine,
a) The mass flow rates of air and CO2 at the inlet
b) The rate of entropy generation

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step by step

Solved in 8 steps with 10 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Heat added in the process ?
Thermodynamics. Please answer it in 1 hr.
In a heat-treating process, a 10-kg metal part, initially at 1100 K, is quenched in a closed tank containing 100 kg of water, initially at 295 K.There is negligible heat transfer between the contents of the tank and their surroundings. Modeling the metal part and water as incompressible with constant specific heats 0.5 kJ/kg . K and 4.4 kJ/kg • K, respectively, determine the final equilibrium temperature after quenching, in K.
Q1 : CSpace air at 20 ° C DBT and 50 % RH is mixed with outdoor air at 45 ° C DBT and 28 ° C WBT in the ratio of 4 : 1 . The mixture is passed through a cooling coil whose temperature is maintained at 8 ° C and whose bypass factor is 0.25 . Find the following : ( a ) Condition of air entering the coil . ( b ) Condition of air leaving the coil . ( c ) If 200 kg / min of air is supplied to the room , find the cooling load of the coil .
4-A rigid tank is divided into two compartments by a partition. One compartment contains 3 kmol of N₂ at 600 kPa pressure and the other compartment contains 7 kmol of CO₂ at 200 kPa. Now the partition is removed, and the two gases form a homogeneous mixture at 300 kPa. The partial pressure of N₂ in the mixture is (a) 75 kPa (b) 90 kPa (c) 150 kPa (d) 175 kPa
Use the following Data for Nitrogen gas: R= 0.2968 kJ/kg.K, C,=1.0418 kJ/kg.K, C,=0.745 kJ/kg.K, Required: Draw consistent, clear and standard schematic for the problem representing the inlet and outlet conditions and label your schematic with the given operating conditions. Analyze the problem systematically using step-by-step CV energy and mass analyses, state your assumptions (wherever applicable), and determine the following (circle your final answers): (a) The specific volume and density at the inlet and exit of the compressor; (b) The difference in the specific enthalpy between the exit and inlet of the compressor assuming a constant specific heat Cp; (c) The specific heat loss from the compressor;
Hydrogen is mixed with oxygen in an adiabatic mixing chamber at 100 kPa, 25 ∘C. The flow rate of hydrogen is 4 kmol/s and that of oxygen is 1 kmol/s. The mixture leaves the chamber at 100 kPa. Assume no chemical reaction and use the PG mixture model. Part A Determine the temperature at the exit (T2). Express your answer to three significant figures. Part B Determine the rate of entropy generation (S˙gen) in the device. Express your answer to four significant figures in kW/K.
Consider a reactor (combustor) in which fuel (CO) and oxidizer (H₂O) flow steadily. Both streams are separate and at standard conditions. The products CO₂ and H₂, a gaseous mixture, leaves at 500 K and 100 kPa. Both CO and H20 at inlet are in gaseous phase. The mass flow rate of CO is 2.8 kg/sec. The magnitude of heat transfer is (in MJ/sec) O 5.7 O 4.7 O 3.7 O 2.7 O 1.7
By hand
D Question 1 Use this figure for Questions 1 to 5. A hot-water stream at 90 °℃ enters an insulated mixing chamber with a mass flow rate of mh=0.75 kg/s where it is mixed with a stream of cold water at 25°℃ in a steady state steady flow process. It is desired that the mixture leaves the chamber at 45°℃ as shown in the Figure Hot water P₁=300 kPa T₁=90°C m=0.75 kg/s Cold water P-300 kPa T: 25% m=? 1 2 Mixing Chamber Mixed warm water Ps-300 kPa T=45°C m3 For Question 1: The specific enthalpy of the hot water, h1, in kJ/kg is
Which is the correct answer