In a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75 mm/rev is used in the operation. If cutting speed=9 m/s, the tool must be changed every 4 workparts; But if cutting speed=5 m/s, the tool can be used to produce 50 pieces between tool changes. Determine the Taylor tool life equation for this job. (use the equations given below for solution)

Q: A drilling operation is performed to create a through hole on a steel plate that is 20 mm thick.…

A:

Q: 3. A 50-mm-long, 30-mm-diameter hole in a steel rod is being enlarged in diameter to 31 mm by one…

A:

Q: a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75…

A:

Q: In an orthogonal cutting operation an 8 mm deep groove is to be turned on a 50 mm diameter steel…

A:

Q: Task : (Machining part) copy and draw the figure below, and describe the process of using CA6140…

A: Lathe machine A lathe machine is a machine tool that removes the undesired material from a rotating…

Q: A turning operation is performed using a rake angle of 15degree. Cutting conditions are, feed= 0.30…

A:

Q: The length, width and thickness of a steel sample are 400 mm, 40 mm and 20 mm, respectively Its…

A:

Q: Given that the length of a work-piece made from copper alloy to be face-milled is 250 mm and the…

A: Given : L = 250 mm D = 150 mm z = 10 To find : Cutting speed and feed

Q: A 16mm Solid carbide tool with two teeth is used to machine Aluminium using the cutting speed of…

A:

Q: The outside diameter of a cylinder made of steel is to be turned. The starting diameter is 120 mm…

A: we know that, Taylor’s tool life equation is given by, VTn = C where, V= Cutting speed (m/min) T=…

Q: Find the machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm…

A: Given data: - The initial diameter of the rod is D = 65 mm. The final diameter of the rod is d = 58…

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: In a turning operation, the workpiece diameter is Dm-40.00 mm and the diameter after the operation…

A: GIVEN DATA - D=40mm D2=24mm V=132m/min f=0.03mm/rev WE HAVE TO CALCULATE MRR

Q: A job has to be machined in shaping and the process parameters are given below: a.      Length of…

A:

Q: Determine time required for machining?

A: Given data;  A 600mm×30mm flat surface of a plate is to be finsih machined on a shaper. Plate is…

Q: e. What are the programmed feed material removal rate.

A: Given data; d=155 mmf=0.15 mm/revcutting speed(v)=150 m/min=150×103 mm/minfind the programmed feed…

Q: The length, width and thickness of a steel sar Its thickness needs to be uniformly reduced milling.…

A: GivenD=100mmw=50mmz=20toothN=1200rpmft=0.05mm/tooth revf=z×ftf=20×0.05f=1mm/rev

Q: Figure A. Rectangular block of steel. Adapted from: https://media.wdscomponents.com/ri-…

A: Given: MRR : 2250 mm3/min l = 150 mm w = 30 mm To find : Feed rate, v

Q: What is the recommended feed for the turning operation above?

A:

Q: over-travel distance is the same as the approach distance, the approach distance and time taken to…

A: Given data; Depth of cut (d) =2mm Milling cutter diameter(D) =100mm   over travel distance is the…

Q: In orthogonal cutting of steel tube of 150 mm diameter and 2 mm thick, the cutting force was 130 kg…

A:

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.