If a article discusses Dyson’s decision to terminate its business relationship with Malaysian supplier ATA IMS Berhad due to concerns over labor practices. Key points include: 1. Termination of Contracts – Dyson, which contributed nearly 80% of ATA’s revenue, ended all three contracts (tooling, goods & services, and contract manufacturing) after an audit revealed labor violations. ATA’s stock value dropped significantly following the news. 2. Labor Violations & Investigations – Allegations included excessive overtime, debt bondage through recruitment fees, forced labor, and mistreatment of workers, including reports of a former worker being taken to the police station and beaten. U.S. authorities were also investigating ATA, reflecting broader concerns over forced labor in Malaysia. 3. Impact & Reactions – The termination affects thousands of workers, most of whom are migrant laborers. Activists called for Dyson to take responsibility for worker remediation. The Malaysian government was also criticized for not addressing previous complaints. 4. Broader Industry Concerns – Social audits, while intended to monitor ethical supply chains, were noted as sometimes ineffective in detecting labor risks. Multiple firms in Malaysia had faced bans from selling products to the U.S. over forced labor concerns. 5. ATA’s Response – ATA denied the allegations, stating it was reviewing the validity of Dyson’s termination notice. The company planned to continue production for Dyson until June 2022 while engaging legal and business advisers to address the audit findings. my question is:
Q: Scientist of Organizational Behaviour (OB) recognize that organisations are not static but dynamic…
A: The question is asking for the term that best completes the sentence and accurately describes the…
Q: How would the critical path, float and project duration change if: Situation 1 2 3 Description D…
A: In summary, the critical path, project duration, total float, and free float would only change if…
Q: QUESTION 2“The findings pointed to a culture of complacency regarding safety at Boeing, raising…
A: Introduction:The relationship between ethics and corporate governance is fundamental to a company's…
Q: The Michael Porter Diamond of National Advantage is a framework that explains why countries foster…
A: a) True. The Michael Porter Diamond of National Advantage is indeed a model that explains why…
Q: 15 Specific Stakeholder Map State Gov Local Gov Foreign Govs Federal Gov Regulatory Agencies Local…
A: FEEL FREE TO ASK FOR CLARIFICATIONS.
Q: Finishers within teams are confident and controls the way the team moves towards accomplishing…
A: True. Finishers within teams are indeed confident and play a crucial role in controlling the way the…
Q: Professional development can benefit both the employee and organization. Analyze the value of…
A: Approach to solving the question:Freeform Detailed explanation: It answers your question absolutely…
Q: How can people (be it leaders in professional or personal contexts) leverage their current platform…
A: Leaders in both professional and personal contexts can leverage their platforms to inspire and…
Q: do fast
A: Given Sample size (n) = 50Population proportion (p) = 0.30 The standard error of the distribution of…
Q: How do you build a classroom culture in which all students feel valued?
A: Creating a safe and respectful environment is the first step in building a classroom culture where…
Q: How are companies using patents and copyrights to prevent rather than encourage innovations?
A: Patents and copyrights were actually created to incentivize innovation by giving creators temporary…
Q: a conclusion what is there to learn from chapter 13 Foundations of Business 7 Edition by william m.…
A: Understanding Marketing ChannelsThe chapter begins by explaining the concept of marketing channels,…
Q: Think of a team in which you have participated in a professional setting (the number of individuals…
A: **Tuckman's Model and My Team** 1. **Forming:** During the first week, we met to understand our…
Q: Question 1 RELEASED BY THE CI, MGMT2023, FEBRUARY 9, 2025 Toodles Inc. had sales of $1,840,000. Cost…
A: QUESTION 1:Income Statement Components:Sales = $1,840,000COGS = $1,180,000Admin & Selling =…
Q: Leaders play an important role in changing and developing organization culture. a) True b)False
A: a) True. Leaders play a crucial role in shaping, changing, and developing the culture of an…
Q: An insurance producer MUST report which of the following situations to the director of insurance…
A: Among the options given the one that requires the producer to report the situation to the director…
Q: Please original work Who owns a customer's information in United States and Europe? Who should…
A: Note: Hello, student. I sincerely hope I was able to answer your question, you are free to edit…
Q: Investigate how AI technologies, such as generative adversarial networks (GANs), are used to create…
A: Solution: 1. How AI Technologies, Such as Generative Adversarial Networks (GANs), Are Used To Create…
Q: Create a BIG 4 LIST with #Collaboration and #Communication. Context: I am a Business Management…
A: Before creating the BIG 4 LIST, it's important to understand the concepts of Collaboration and…
Q: DesJardins (2020) stated, "women who were engaged full-time with child care and homemaking were…
A: Approach to solving the question:Step 1: Figure out what the question isTo answer the question, you…
Q: 9-18. Evaluate the other performance appraisal methods mentioned in this case. Which would you…
A: The case discusses several performance appraisal methods, including the Graphic Rating Scale, Forced…
Q: Explain base pay, premium pay, and types of variable pay as parts of a compensation program. Exa
A: Approach to solving the question:Freeform Detailed explanation: 1. Defining the three components:It…
Q: the government is about to build a coop housing project in an open land where rich elites are…
A: These questions were designed to gather a balanced understanding of the residents' perspectives on…
Q: Develop a plan to evaluate future engagements by yourself and other CoffeeVille team members in…
A: The process-related criteria for evaluation will include: problem identification, data gathering,…
Q: The Oaks Academy highly values diversity and actively seeks it in its student body, faculty, and…
A: Firstly, reflect on your past experiences in diverse environments. This could be in your previous…
Q: do fast all
A: 37.Correct answer: d. a severe hurricane in FloridaReason: A severe hurricane could damage orange…
Q: Ans
A: Explanation of Sales:Sales represent the total revenue generated by a company from selling its goods…
Q: How can organizations assess whether their PRM system effectively aligns with and supports their CRM…
A: Organizations can assess the alignment of their Partner Relationship Management (PRM) system with…
Q: derive the expression step by step for cycle thermal efficiency of gas turbine in terms of turbine…
A: Detailed explanation:
Q: Here's the authentic insight on the article that my classmate just wrote. Please give a brief…
A: Comprehensive Comment on Ian Flores' Insight on the ArticleIntroductionIan Flores provides an…
Q: I have just started out as a junior executive in the purchasing department of my organization. My…
A: Prior to hearing my boss's explanation of the envelope, I had several choices, each reflecting…
Q: Using a cartoon explain why is antigen presentation important and what cells of the immune system…
A: Antigen presentation is a very important process in the immune system. It involves specialized cells…
Q: Is Collaboration and project management skills are critically important in Professionals in HRIS?
A: **1. Collaboration in HRIS**HRIS professionals often work across multiple departments, including HR,…
Q: I need help answering the following questions listed below Much attention is given to the…
A: Answer well explained above
Q: Home Page - JagApp Week 13 - Homework #8 (100 points) i 10 1 points eBook Print ☑ Oli M Question 1 -…
A: The income statement for the year ended on December 31, 2024 is prepared by using the following…
Q: Jack Welch, former CEO of GE, believes that all internal and external organizational boundaries…
A: Detailed Explanation: Jack Welch, who served as the CEO of General Electric (GE) from 1981 to 2001,…
Q: Mc Graw Hill Home Page - JagApp Week 12 - Midterm #2 (100 points) i 17 Consider the following list…
A: Hello student! An account's normal balance is the side (debit or credit) which will increase the…
Q: Please reconstruct and suggest a new organizational chart for NESLE. State the reason for new…
A: Reason for the New Organizational ChartThe new organizational chart is designed to handle the…
Q: Business pls quick
A: The strategic management process is a comprehensive approach that organizations use to achieve…
Q: Why do most companies use workday as human resource information system (HRIS)? pros and cons?
A: Pros of Workday HRIS:Unified Platform: Workday integrates HR, payroll, finance, and planning in a…
Q: The linkage between HRM and the strategic management process is critical to the success of any…
A: 1. Introduction to Strategic Management and HRMThe strategic management process involves analyzing…
Q: For this case, assume that your position is that of a consultant to the CEO. Your goal is to focus…
A: Analysis of the Strategic Issue in "Amazon Goes Global 2020"When advising Amazon's CEO on global…
Q: https://web.p.ebscohost.com/bsi/pdfviewer/pdfviewer?vid=1&sid=893c3f08-cf0a-4524-bfec-e7d61e03aa…
A: 1. Characteristics of an Engaged EmployeeAn engaged employee in healthcare is deeply connected to…
Q: do fast
A:
Q: Discuss 2 factors which influence an individual’s personality, describing how the concept of…
A: 2. **Environment (Social and Cultural Influences)** - Social interactions, **family upbringing,…
Q: A corpus is a technical term for a collection of texts used to analyze a language and verify its…
A: Step 1: Find the missing Frequency for Word "and"∑Total = Frequency for "a" + Frequency for "to" +…
Q: How can we improve media literacy among different age groups to better combat fake news? What role…
A: Improving media literacy among different age groups involves educating individuals on how to…
Q: Why does a dietitian manager need to know about the importance of ordering and supply restocking as…
A: A dietitian manager's understanding of ordering and supply restocking is crucial for their work…
Q: Subject: accounting sum
A: Friday:Ticket price: $12 + (25% of $12) = $12 + $3 = $15 Saturday:Ticket price: $12 + (35% of $12) =…
Q: Do you think it is a good idea for a leader to seek feedback from followers? Why?
A: Yes, it is a very good idea for a leader to seek feedback from followers. Here's why:Improved…
If a article discusses Dyson’s decision to terminate its business relationship with Malaysian supplier ATA IMS Berhad due to concerns over labor practices. Key points include:
1. Termination of Contracts – Dyson, which contributed nearly 80% of ATA’s revenue, ended all three contracts (tooling, goods & services, and contract manufacturing) after an audit revealed labor violations. ATA’s stock value dropped significantly following the news.
2. Labor Violations & Investigations – Allegations included excessive overtime, debt bondage through recruitment fees, forced labor, and mistreatment of workers, including reports of a former worker being taken to the police station and beaten. U.S. authorities were also investigating ATA, reflecting broader concerns over forced labor in Malaysia.
3. Impact & Reactions – The termination affects thousands of workers, most of whom are migrant laborers. Activists called for Dyson to take responsibility for worker remediation. The Malaysian government was also criticized for not addressing previous complaints.
4. Broader Industry Concerns – Social audits, while intended to monitor ethical supply chains, were noted as sometimes ineffective in detecting labor risks. Multiple firms in Malaysia had faced bans from selling products to the U.S. over forced labor concerns.
5. ATA’s Response – ATA denied the allegations, stating it was reviewing the validity of Dyson’s termination notice. The company planned to continue production for Dyson until June 2022 while engaging legal and business advisers to address the audit findings.
my question is:
Step by step
Solved in 2 steps
- Avion, Inc. Susan Dey and Bill Mifflin, procurement managers at Avion, Inc., sat across from each other and reviewed a troubling performance report concerning a key supplier, Foster Technologies. The report detailed the deteriorating performance of Foster Technologies in the areas of material quality and on-time delivery. At this point, Kevin ODonnell, another procurement manager, entered the room. Explain the role of performance measurement in managing supply chain activities.Avion, Inc. Susan Dey and Bill Mifflin, procurement managers at Avion, Inc., sat across from each other and reviewed a troubling performance report concerning a key supplier, Foster Technologies. The report detailed the deteriorating performance of Foster Technologies in the areas of material quality and on-time delivery. At this point, Kevin ODonnell, another procurement manager, entered the room. What parts of the supply chain are most closely involved with the situation in this case? What is the responsibility of each part in order to maintain a smooth flow of material?Scenario 4 Sharon Gillespie, a new buyer at Visionex, Inc., was reviewing quotations for a tooling contract submitted by four suppliers. She was evaluating the quotes based on price, target quality levels, and delivery lead time promises. As she was working, her manager, Dave Cox, entered her office. He asked how everything was progressing and if she needed any help. She mentioned she was reviewing quotations from suppliers for a tooling contract. Dave asked who the interested suppliers were and if she had made a decision. Sharon indicated that one supplier, Apex, appeared to fit exactly the requirements Visionex had specified in the proposal. Dave told her to keep up the good work. Later that day Dave again visited Sharons office. He stated that he had done some research on the suppliers and felt that another supplier, Micron, appeared to have the best track record with Visionex. He pointed out that Sharons first choice was a new supplier to Visionex and there was some risk involved with that choice. Dave indicated that it would please him greatly if she selected Micron for the contract. The next day Sharon was having lunch with another buyer, Mark Smith. She mentioned the conversation with Dave and said she honestly felt that Apex was the best choice. When Mark asked Sharon who Dave preferred, she answered, Micron. At that point Mark rolled his eyes and shook his head. Sharon asked what the body language was all about. Mark replied, Look, I know youre new but you should know this. I heard last week that Daves brother-in-law is a new part owner of Micron. I was wondering how soon it would be before he started steering business to that company. He is not the straightest character. Sharon was shocked. After a few moments, she announced that her original choice was still the best selection. At that point Mark reminded Sharon that she was replacing a terminated buyer who did not go along with one of Daves previous preferred suppliers. What does the Institute of Supply Management code of ethics say about financial conflicts of interest?
- Scenario 4 Sharon Gillespie, a new buyer at Visionex, Inc., was reviewing quotations for a tooling contract submitted by four suppliers. She was evaluating the quotes based on price, target quality levels, and delivery lead time promises. As she was working, her manager, Dave Cox, entered her office. He asked how everything was progressing and if she needed any help. She mentioned she was reviewing quotations from suppliers for a tooling contract. Dave asked who the interested suppliers were and if she had made a decision. Sharon indicated that one supplier, Apex, appeared to fit exactly the requirements Visionex had specified in the proposal. Dave told her to keep up the good work. Later that day Dave again visited Sharons office. He stated that he had done some research on the suppliers and felt that another supplier, Micron, appeared to have the best track record with Visionex. He pointed out that Sharons first choice was a new supplier to Visionex and there was some risk involved with that choice. Dave indicated that it would please him greatly if she selected Micron for the contract. The next day Sharon was having lunch with another buyer, Mark Smith. She mentioned the conversation with Dave and said she honestly felt that Apex was the best choice. When Mark asked Sharon who Dave preferred, she answered, Micron. At that point Mark rolled his eyes and shook his head. Sharon asked what the body language was all about. Mark replied, Look, I know youre new but you should know this. I heard last week that Daves brother-in-law is a new part owner of Micron. I was wondering how soon it would be before he started steering business to that company. He is not the straightest character. Sharon was shocked. After a few moments, she announced that her original choice was still the best selection. At that point Mark reminded Sharon that she was replacing a terminated buyer who did not go along with one of Daves previous preferred suppliers. Ethical decisions that affect a buyers ethical perspective usually involve the organizational environment, cultural environment, personal environment, and industry environment. Analyze this scenario using these four variables.Scenario 4 Sharon Gillespie, a new buyer at Visionex, Inc., was reviewing quotations for a tooling contract submitted by four suppliers. She was evaluating the quotes based on price, target quality levels, and delivery lead time promises. As she was working, her manager, Dave Cox, entered her office. He asked how everything was progressing and if she needed any help. She mentioned she was reviewing quotations from suppliers for a tooling contract. Dave asked who the interested suppliers were and if she had made a decision. Sharon indicated that one supplier, Apex, appeared to fit exactly the requirements Visionex had specified in the proposal. Dave told her to keep up the good work. Later that day Dave again visited Sharons office. He stated that he had done some research on the suppliers and felt that another supplier, Micron, appeared to have the best track record with Visionex. He pointed out that Sharons first choice was a new supplier to Visionex and there was some risk involved with that choice. Dave indicated that it would please him greatly if she selected Micron for the contract. The next day Sharon was having lunch with another buyer, Mark Smith. She mentioned the conversation with Dave and said she honestly felt that Apex was the best choice. When Mark asked Sharon who Dave preferred, she answered, Micron. At that point Mark rolled his eyes and shook his head. Sharon asked what the body language was all about. Mark replied, Look, I know youre new but you should know this. I heard last week that Daves brother-in-law is a new part owner of Micron. I was wondering how soon it would be before he started steering business to that company. He is not the straightest character. Sharon was shocked. After a few moments, she announced that her original choice was still the best selection. At that point Mark reminded Sharon that she was replacing a terminated buyer who did not go along with one of Daves previous preferred suppliers. What should Sharon do in this situation?The Global Sourcing Wire Harness Decision Sheila Austin, a buyer at Autolink, a Detroit-based producer of subassemblies for the automotive market, has sent out requests for quotations for a wiring harness to four prospective suppliers. Only two of the four suppliers indicated an interest in quoting the business: Original Wire (Auburn Hills, MI) and Happy Lucky Assemblies (HLA) of Guangdong Province, China. The estimated demand for the harnesses is 5,000 units a month. Both suppliers will incur some costs to retool for this particular harness. The harnesses will be prepackaged in 24 12 6-inch cartons. Each packaged unit weighs approximately 10 pounds. Quote 1 The first quote received is from Original Wire. Auburn Hills is about 20 miles from Autolinks corporate headquarters, so the quote was delivered in person. When Sheila went down to the lobby, she was greeted by the sales agent and an engineering representative. After the quote was handed over, the sales agent noted that engineering would be happy to work closely with Autolink in developing the unit and would also be interested in future business that might involve finding ways to reduce costs. The sales agent also noted that they were hungry for business, as they were losing a lot of customers to companies from China. The quote included unit price, tooling, and packaging. The quoted unit price does not include shipping costs. Original Wire requires no special warehousing of inventory, and daily deliveries from its manufacturing site directly to Autolinks assembly operations are possible. Original Wire Quote: Unit price = 30 Packing costs = 0.75 per unit Tooling = 6,000 one-time fixed charge Freight cost = 5.20 per hundred pounds Quote 2 The second quote received is from Happy Lucky Assemblies of Guangdong Province, China. The supplier must pack the harnesses in a container and ship via inland transportation to the port of Shanghai in China, have the shipment transferred to a container ship, ship material to Seattle, and then have material transported inland to Detroit. The quoted unit price does not include international shipping costs, which the buyer will assume. HLA Quote: Unit price = 19.50 Shipping lead time = Eight weeks Tooling = 3,000 In addition to the suppliers quote, Sheila must consider additional costs and information before preparing a comparison of the Chinese suppliers quotation: Each monthly shipment requires three 40-foot containers. Packing costs for containerization = 2 per unit. Cost of inland transportation to port of export = 200 per container. Freight forwarders fee = 100 per shipment (letter of credit, documentation, etc.). Cost of ocean transport = 4,000 per container. This has risen significantly in recent years due to a shortage of ocean freight capacity. Marine insurance = 0.50 per 100 of shipment. U.S. port handling charges = 1,200 per container. This fee has also risen considerably this year, due to increased security. Ports have also been complaining that the charges may increase in the future. Customs duty = 5% of unit cost. Customs broker fees per shipment = 300. Transportation from Seattle to Detroit = 18.60 per hundred pounds. Need to warehouse at least four weeks of inventory in Detroit at a warehousing cost of 1.00 per cubic foot per month, to compensate for lead time uncertainty. Sheila must also figure the costs associated with committing corporate capital for holding inventory. She has spoken to some accountants, who typically use a corporate cost of capital rate of 15%. Cost of hedging currencybroker fees = 400 per shipment Additional administrative time due to international shipping = 4 hours per shipment 25 per hour (estimated) At least two five-day visits per year to travel to China to meet with supplier and provide updates on performance and shipping = 20,000 per year (estimated) The international sourcing costs must be absorbed by Sheila, as the supplier does not assume any of the additional estimated costs and invoice Sheila later, or build the costs into a revised unit price. Sheila feels that the U.S. supplier is probably less expensive, even though it quoted a higher price. Sheila also knows that this is a standard technology that is unlikely to change during the next three years, but which could be a contract that extends multiple years out. There is also a lot of hall talk amongst the engineers on her floor about next-generation automotive electronics, which will completely eliminate the need for wire harnesses, which will be replaced by electronic components that are smaller, lighter, and more reliable. She is unsure about how to calculate the total costs for each option, and she is even more unsure about how to factor these other variables into the decision. Calculate the total cost per unit of purchasing from Original Wire.
- The Global Sourcing Wire Harness Decision Sheila Austin, a buyer at Autolink, a Detroit-based producer of subassemblies for the automotive market, has sent out requests for quotations for a wiring harness to four prospective suppliers. Only two of the four suppliers indicated an interest in quoting the business: Original Wire (Auburn Hills, MI) and Happy Lucky Assemblies (HLA) of Guangdong Province, China. The estimated demand for the harnesses is 5,000 units a month. Both suppliers will incur some costs to retool for this particular harness. The harnesses will be prepackaged in 24 12 6-inch cartons. Each packaged unit weighs approximately 10 pounds. Quote 1 The first quote received is from Original Wire. Auburn Hills is about 20 miles from Autolinks corporate headquarters, so the quote was delivered in person. When Sheila went down to the lobby, she was greeted by the sales agent and an engineering representative. After the quote was handed over, the sales agent noted that engineering would be happy to work closely with Autolink in developing the unit and would also be interested in future business that might involve finding ways to reduce costs. The sales agent also noted that they were hungry for business, as they were losing a lot of customers to companies from China. The quote included unit price, tooling, and packaging. The quoted unit price does not include shipping costs. Original Wire requires no special warehousing of inventory, and daily deliveries from its manufacturing site directly to Autolinks assembly operations are possible. Original Wire Quote: Unit price = 30 Packing costs = 0.75 per unit Tooling = 6,000 one-time fixed charge Freight cost = 5.20 per hundred pounds Quote 2 The second quote received is from Happy Lucky Assemblies of Guangdong Province, China. The supplier must pack the harnesses in a container and ship via inland transportation to the port of Shanghai in China, have the shipment transferred to a container ship, ship material to Seattle, and then have material transported inland to Detroit. The quoted unit price does not include international shipping costs, which the buyer will assume. HLA Quote: Unit price = 19.50 Shipping lead time = Eight weeks Tooling = 3,000 In addition to the suppliers quote, Sheila must consider additional costs and information before preparing a comparison of the Chinese suppliers quotation: Each monthly shipment requires three 40-foot containers. Packing costs for containerization = 2 per unit. Cost of inland transportation to port of export = 200 per container. Freight forwarders fee = 100 per shipment (letter of credit, documentation, etc.). Cost of ocean transport = 4,000 per container. This has risen significantly in recent years due to a shortage of ocean freight capacity. Marine insurance = 0.50 per 100 of shipment. U.S. port handling charges = 1,200 per container. This fee has also risen considerably this year, due to increased security. Ports have also been complaining that the charges may increase in the future. Customs duty = 5% of unit cost. Customs broker fees per shipment = 300. Transportation from Seattle to Detroit = 18.60 per hundred pounds. Need to warehouse at least four weeks of inventory in Detroit at a warehousing cost of 1.00 per cubic foot per month, to compensate for lead time uncertainty. Sheila must also figure the costs associated with committing corporate capital for holding inventory. She has spoken to some accountants, who typically use a corporate cost of capital rate of 15%. Cost of hedging currencybroker fees = 400 per shipment Additional administrative time due to international shipping = 4 hours per shipment 25 per hour (estimated) At least two five-day visits per year to travel to China to meet with supplier and provide updates on performance and shipping = 20,000 per year (estimated) The international sourcing costs must be absorbed by Sheila, as the supplier does not assume any of the additional estimated costs and invoice Sheila later, or build the costs into a revised unit price. Sheila feels that the U.S. supplier is probably less expensive, even though it quoted a higher price. Sheila also knows that this is a standard technology that is unlikely to change during the next three years, but which could be a contract that extends multiple years out. There is also a lot of hall talk amongst the engineers on her floor about next-generation automotive electronics, which will completely eliminate the need for wire harnesses, which will be replaced by electronic components that are smaller, lighter, and more reliable. She is unsure about how to calculate the total costs for each option, and she is even more unsure about how to factor these other variables into the decision. Calculate the total cost per unit of purchasing from Happy Lucky Assemblies.The Global Sourcing Wire Harness Decision Sheila Austin, a buyer at Autolink, a Detroit-based producer of subassemblies for the automotive market, has sent out requests for quotations for a wiring harness to four prospective suppliers. Only two of the four suppliers indicated an interest in quoting the business: Original Wire (Auburn Hills, MI) and Happy Lucky Assemblies (HLA) of Guangdong Province, China. The estimated demand for the harnesses is 5,000 units a month. Both suppliers will incur some costs to retool for this particular harness. The harnesses will be prepackaged in 24 12 6-inch cartons. Each packaged unit weighs approximately 10 pounds. Quote 1 The first quote received is from Original Wire. Auburn Hills is about 20 miles from Autolinks corporate headquarters, so the quote was delivered in person. When Sheila went down to the lobby, she was greeted by the sales agent and an engineering representative. After the quote was handed over, the sales agent noted that engineering would be happy to work closely with Autolink in developing the unit and would also be interested in future business that might involve finding ways to reduce costs. The sales agent also noted that they were hungry for business, as they were losing a lot of customers to companies from China. The quote included unit price, tooling, and packaging. The quoted unit price does not include shipping costs. Original Wire requires no special warehousing of inventory, and daily deliveries from its manufacturing site directly to Autolinks assembly operations are possible. Original Wire Quote: Unit price = 30 Packing costs = 0.75 per unit Tooling = 6,000 one-time fixed charge Freight cost = 5.20 per hundred pounds Quote 2 The second quote received is from Happy Lucky Assemblies of Guangdong Province, China. The supplier must pack the harnesses in a container and ship via inland transportation to the port of Shanghai in China, have the shipment transferred to a container ship, ship material to Seattle, and then have material transported inland to Detroit. The quoted unit price does not include international shipping costs, which the buyer will assume. HLA Quote: Unit price = 19.50 Shipping lead time = Eight weeks Tooling = 3,000 In addition to the suppliers quote, Sheila must consider additional costs and information before preparing a comparison of the Chinese suppliers quotation: Each monthly shipment requires three 40-foot containers. Packing costs for containerization = 2 per unit. Cost of inland transportation to port of export = 200 per container. Freight forwarders fee = 100 per shipment (letter of credit, documentation, etc.). Cost of ocean transport = 4,000 per container. This has risen significantly in recent years due to a shortage of ocean freight capacity. Marine insurance = 0.50 per 100 of shipment. U.S. port handling charges = 1,200 per container. This fee has also risen considerably this year, due to increased security. Ports have also been complaining that the charges may increase in the future. Customs duty = 5% of unit cost. Customs broker fees per shipment = 300. Transportation from Seattle to Detroit = 18.60 per hundred pounds. Need to warehouse at least four weeks of inventory in Detroit at a warehousing cost of 1.00 per cubic foot per month, to compensate for lead time uncertainty. Sheila must also figure the costs associated with committing corporate capital for holding inventory. She has spoken to some accountants, who typically use a corporate cost of capital rate of 15%. Cost of hedging currencybroker fees = 400 per shipment Additional administrative time due to international shipping = 4 hours per shipment 25 per hour (estimated) At least two five-day visits per year to travel to China to meet with supplier and provide updates on performance and shipping = 20,000 per year (estimated) The international sourcing costs must be absorbed by Sheila, as the supplier does not assume any of the additional estimated costs and invoice Sheila later, or build the costs into a revised unit price. Sheila feels that the U.S. supplier is probably less expensive, even though it quoted a higher price. Sheila also knows that this is a standard technology that is unlikely to change during the next three years, but which could be a contract that extends multiple years out. There is also a lot of hall talk amongst the engineers on her floor about next-generation automotive electronics, which will completely eliminate the need for wire harnesses, which will be replaced by electronic components that are smaller, lighter, and more reliable. She is unsure about how to calculate the total costs for each option, and she is even more unsure about how to factor these other variables into the decision. Based on the total cost per unit, which supplier should Sheila recommend?The Global Sourcing Wire Harness Decision Sheila Austin, a buyer at Autolink, a Detroit-based producer of subassemblies for the automotive market, has sent out requests for quotations for a wiring harness to four prospective suppliers. Only two of the four suppliers indicated an interest in quoting the business: Original Wire (Auburn Hills, MI) and Happy Lucky Assemblies (HLA) of Guangdong Province, China. The estimated demand for the harnesses is 5,000 units a month. Both suppliers will incur some costs to retool for this particular harness. The harnesses will be prepackaged in 24 12 6-inch cartons. Each packaged unit weighs approximately 10 pounds. Quote 1 The first quote received is from Original Wire. Auburn Hills is about 20 miles from Autolinks corporate headquarters, so the quote was delivered in person. When Sheila went down to the lobby, she was greeted by the sales agent and an engineering representative. After the quote was handed over, the sales agent noted that engineering would be happy to work closely with Autolink in developing the unit and would also be interested in future business that might involve finding ways to reduce costs. The sales agent also noted that they were hungry for business, as they were losing a lot of customers to companies from China. The quote included unit price, tooling, and packaging. The quoted unit price does not include shipping costs. Original Wire requires no special warehousing of inventory, and daily deliveries from its manufacturing site directly to Autolinks assembly operations are possible. Original Wire Quote: Unit price = 30 Packing costs = 0.75 per unit Tooling = 6,000 one-time fixed charge Freight cost = 5.20 per hundred pounds Quote 2 The second quote received is from Happy Lucky Assemblies of Guangdong Province, China. The supplier must pack the harnesses in a container and ship via inland transportation to the port of Shanghai in China, have the shipment transferred to a container ship, ship material to Seattle, and then have material transported inland to Detroit. The quoted unit price does not include international shipping costs, which the buyer will assume. HLA Quote: Unit price = 19.50 Shipping lead time = Eight weeks Tooling = 3,000 In addition to the suppliers quote, Sheila must consider additional costs and information before preparing a comparison of the Chinese suppliers quotation: Each monthly shipment requires three 40-foot containers. Packing costs for containerization = 2 per unit. Cost of inland transportation to port of export = 200 per container. Freight forwarders fee = 100 per shipment (letter of credit, documentation, etc.). Cost of ocean transport = 4,000 per container. This has risen significantly in recent years due to a shortage of ocean freight capacity. Marine insurance = 0.50 per 100 of shipment. U.S. port handling charges = 1,200 per container. This fee has also risen considerably this year, due to increased security. Ports have also been complaining that the charges may increase in the future. Customs duty = 5% of unit cost. Customs broker fees per shipment = 300. Transportation from Seattle to Detroit = 18.60 per hundred pounds. Need to warehouse at least four weeks of inventory in Detroit at a warehousing cost of 1.00 per cubic foot per month, to compensate for lead time uncertainty. Sheila must also figure the costs associated with committing corporate capital for holding inventory. She has spoken to some accountants, who typically use a corporate cost of capital rate of 15%. Cost of hedging currencybroker fees = 400 per shipment Additional administrative time due to international shipping = 4 hours per shipment 25 per hour (estimated) At least two five-day visits per year to travel to China to meet with supplier and provide updates on performance and shipping = 20,000 per year (estimated) The international sourcing costs must be absorbed by Sheila, as the supplier does not assume any of the additional estimated costs and invoice Sheila later, or build the costs into a revised unit price. Sheila feels that the U.S. supplier is probably less expensive, even though it quoted a higher price. Sheila also knows that this is a standard technology that is unlikely to change during the next three years, but which could be a contract that extends multiple years out. There is also a lot of hall talk amongst the engineers on her floor about next-generation automotive electronics, which will completely eliminate the need for wire harnesses, which will be replaced by electronic components that are smaller, lighter, and more reliable. She is unsure about how to calculate the total costs for each option, and she is even more unsure about how to factor these other variables into the decision. Are there any other issues besides cost that Sheila should evaluate?
- The Global Sourcing Wire Harness Decision Sheila Austin, a buyer at Autolink, a Detroit-based producer of subassemblies for the automotive market, has sent out requests for quotations for a wiring harness to four prospective suppliers. Only two of the four suppliers indicated an interest in quoting the business: Original Wire (Auburn Hills, MI) and Happy Lucky Assemblies (HLA) of Guangdong Province, China. The estimated demand for the harnesses is 5,000 units a month. Both suppliers will incur some costs to retool for this particular harness. The harnesses will be prepackaged in 24 12 6-inch cartons. Each packaged unit weighs approximately 10 pounds. Quote 1 The first quote received is from Original Wire. Auburn Hills is about 20 miles from Autolinks corporate headquarters, so the quote was delivered in person. When Sheila went down to the lobby, she was greeted by the sales agent and an engineering representative. After the quote was handed over, the sales agent noted that engineering would be happy to work closely with Autolink in developing the unit and would also be interested in future business that might involve finding ways to reduce costs. The sales agent also noted that they were hungry for business, as they were losing a lot of customers to companies from China. The quote included unit price, tooling, and packaging. The quoted unit price does not include shipping costs. Original Wire requires no special warehousing of inventory, and daily deliveries from its manufacturing site directly to Autolinks assembly operations are possible. Original Wire Quote: Unit price = 30 Packing costs = 0.75 per unit Tooling = 6,000 one-time fixed charge Freight cost = 5.20 per hundred pounds Quote 2 The second quote received is from Happy Lucky Assemblies of Guangdong Province, China. The supplier must pack the harnesses in a container and ship via inland transportation to the port of Shanghai in China, have the shipment transferred to a container ship, ship material to Seattle, and then have material transported inland to Detroit. The quoted unit price does not include international shipping costs, which the buyer will assume. HLA Quote: Unit price = 19.50 Shipping lead time = Eight weeks Tooling = 3,000 In addition to the suppliers quote, Sheila must consider additional costs and information before preparing a comparison of the Chinese suppliers quotation: Each monthly shipment requires three 40-foot containers. Packing costs for containerization = 2 per unit. Cost of inland transportation to port of export = 200 per container. Freight forwarders fee = 100 per shipment (letter of credit, documentation, etc.). Cost of ocean transport = 4,000 per container. This has risen significantly in recent years due to a shortage of ocean freight capacity. Marine insurance = 0.50 per 100 of shipment. U.S. port handling charges = 1,200 per container. This fee has also risen considerably this year, due to increased security. Ports have also been complaining that the charges may increase in the future. Customs duty = 5% of unit cost. Customs broker fees per shipment = 300. Transportation from Seattle to Detroit = 18.60 per hundred pounds. Need to warehouse at least four weeks of inventory in Detroit at a warehousing cost of 1.00 per cubic foot per month, to compensate for lead time uncertainty. Sheila must also figure the costs associated with committing corporate capital for holding inventory. She has spoken to some accountants, who typically use a corporate cost of capital rate of 15%. Cost of hedging currencybroker fees = 400 per shipment Additional administrative time due to international shipping = 4 hours per shipment 25 per hour (estimated) At least two five-day visits per year to travel to China to meet with supplier and provide updates on performance and shipping = 20,000 per year (estimated) The international sourcing costs must be absorbed by Sheila, as the supplier does not assume any of the additional estimated costs and invoice Sheila later, or build the costs into a revised unit price. Sheila feels that the U.S. supplier is probably less expensive, even though it quoted a higher price. Sheila also knows that this is a standard technology that is unlikely to change during the next three years, but which could be a contract that extends multiple years out. There is also a lot of hall talk amongst the engineers on her floor about next-generation automotive electronics, which will completely eliminate the need for wire harnesses, which will be replaced by electronic components that are smaller, lighter, and more reliable. She is unsure about how to calculate the total costs for each option, and she is even more unsure about how to factor these other variables into the decision. Based on this case, do you think international purchasing is more or less complex than domestic purchasing? Why? Is it worth the additional effort?In the summer of 2017, Transport of London (TfL) began proceedings to revoke Ubers permit to operate in London. How do think Ubers poor corporate reputation may have been a factor in TfLs thinking?
