### Physics Problem: Pulling a Cart of Kindergarteners**Problem Statement:**You are forced to pull a group of kindergarteners in a cart. You apply a horizontal force of \( F = 450 \, \text{N} \). The cart has a total mass of \( m = 500 \, \text{kg} \) with a center of mass at \( G \). Assume the wheels have negligible mass, negligible size (\( r \)) and no rolling resistance. The distances are given by \( d_A = 0.73 \, \text{m} \) and \( d_B = 1.2 \, \text{m} \). You apply the horizontal force at a height \( y = 0.4 \, \text{m} \) from the ground. The center of gravity \( G \) is located at a height \( h = 1.2 \, \text{m} \) from the ground.**Given Data:**- Horizontal force: \( F = 450 \, \text{N} \)- Mass of the cart: \( m = 500 \, \text{kg} \)- Distance from A to center of mass \( G \): \( d_A = 0.73 \, \text{m} \)- Distance from B to center of mass \( G \): \( d_B = 1.2 \, \text{m} \)- Height from application of force \( F \) to the ground: \( y = 0.4 \, \text{m} \)- Height of center of gravity \( G \) from the ground: \( h = 1.2 \, \text{m} \)**Determine:**1. **Acceleration of the Cart (a):** - \( a = 0.9 \, \frac{\text{m}}{\text{s}^2} \)2. **Normal Forces at A and B ( \( N_A \) and \( N_B \)):** - \( N_A = 3049.74 \, \text{N} \) - \( N_B = 1855.26 \, \text{N} \)**Visual Explanation:**The diagram shows a cart being pulled by a person. The cart contains kindergarteners and has two wheels denoted as points A and B.

Answered: Image /qna-images/answer/ec07c55c-b3f1-40ae-84d4-36fbc6bf6d35.jpg

h a = 0.9 on. NA 3049.74 dA NB 1855.26 .G Determine normal forces at A and B. You are forced to pull a group of kindergarteners in a cart. You apply a horizontal force of F = 450 N. The cart has a total mass of m= 500 kg with a center of mass at G. Assume the wheels have negligible mass, negligible size (r) and no rolling resistance. dA=0.73 m and dg = 1.2 m. You apply the horizontal force at a height y = 0.4 m from the ground. The center of gravity G is located at a height h = 1.2 m from the ground. Determine acceleration of the cart m XN XN da B y UBC Engineering

h a = 0.9 on. NA 3049.74 dA NB 1855.26 .G Determine normal forces at A and B. You are forced to pull a group of kindergarteners in a cart. You apply a horizontal force of F = 450 N. The cart has a total mass of m= 500 kg with a center of mass at G. Assume the wheels have negligible mass, negligible size (r) and no rolling resistance. dA=0.73 m and dg = 1.2 m. You apply the horizontal force at a height y = 0.4 m from the ground. The center of gravity G is located at a height h = 1.2 m from the ground. Determine acceleration of the cart m XN XN da B y UBC Engineering

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q 40/A homogeneous bar of length / and weight w lb rests horizontally as shown in Fig. 40 with its free endon a block of weight W. the block W is at rest on a plane inclined at the angle a with the horizontal. Determine the necessary coefficient of friction u between the block and the plane for equilibrium. Assume no friction between the bar and the block.
Lm. mL 600 Problem 56. Two rods, each of length 1-0.5m and mass m₁ = 1 kg, are joined together by hinges as shown. The bottom end of the left rod is connected to the ground, while the bottom end of the right one is connected to a block of mass m₂ = 2 kg. The block is then released to a position where the rods form a 60° angle with the horizontal plane. Friction is negligible. a) Find the velocity of point A as it hits the ground. b) Find the acceleration of mass my at that moment.
A 150lb man stands on a 60lb bar to which a cable is fixed at B. The cable passes over two fixed pegs with coefficients of friction indicated. Assume that the arrangement of the pegs permits the cable to contact each peg over a total angle of 90-degrees (90-degrees per peg). Assume that the normal force exerted by the man on the bar acts downward through A. Find the largest force the man can exert on the cable and maintain the bar horizontal.
Fig. 1 shows a simple six bar linkage held in static equilibrium while a torque Tin = 250 N mm is applied. Determine the reaction forces at each joint and the holding force P by considering the free-body diagrams of each member. Each small square on the grid is 50 mm by 50 mm. H E Figure 1 Simple Six Bar Linkage B Tin
A sled of mass 500kg sits at rest on a rough slope that is inclined at 10* to the horizontal. The coefficient of friction between the slope and the sled is 0.3. The sled is held in place by a wire attached to a winch. The tension in the wire is TN. a) Find the maximum possible value of T. A load of mass mkg is added to the sled, and tension in the wire is increased to 5000N in order to pull the sled and load up the slop. Given that the sled and load are pulled a distance of 100m in 80seconds, b) Work out the value of m
3) The cart shown below weighs 45o lb (weight located at CG, at geometric center of cart). If the wheels are locked, and the coefficient of static friction between the wheels and the ground is o.4 (), will the cart slide down the hill? Yes/No: 8 ft 3 ft CG 1 ft 6 ft 15
3.2 Sliding blocks with friction* Mass MA = 4kg rests on top of mass Mg = 5 kg that rests on a fric- tionless table. The coefficient of friction between the two blocks is such that the blocks just start to slip when the horizontal force F applied to the lower block is 27 N. Suppose that now a horizontal force is applied to the upper block. What is its maximum value for the blocks to slide without slipping relative to each other?
%£9 l. 4G 11:9 1st class / 2021- 2022 PROBLEMS 1- A ( 200 N) weight of the block shown in fig. is supported by a pin and bracket at ( A ) and by a cable (BC ). Determine the reaction at ( A ) and the tension 30 in the cable 0.75 a 2 - The 200-N force produces a torque (moment) of 40 N.m about the axis of the bolt in order to tighten the hexagonal nut . Find the forces 2mm between the smooth jaws of the wrench and the nut if contact occurs at the corners A and B of the hexagon. 3 - The pin at A can support a maximum force of 3.2 KN . What is the coresponding maximum load L which can be supported by the bracket ? 4 - A block placed under the head , of the claw hammer as shown greatly facilitates the extraction of the nail. If the 200-N pull on the handle is required to pull the nail calculate the tension T in the nail and the magnitude A ne me of the force exerted by the hammer head on the block The contacting surfaces at A are sufficiently rough to prevent slipping Alamarah University…
In the old-fashioned printing press of Fig. square-threaded screw is used to press the paper against the type bed. The single-threaded screw has a mean radius of 20 mm and a lead of 100 mm. The coefficient of friction is 0.15, and the clamping force necessary to guarantee clear printing on all parts of the paper is 400 N. Determine the twisting moment necessary to operate the press and whether or not a moment must be applied to release the press. P
A block and sphere are connected by a cord that passes over a pulley as shown. Neglect friction and assume the cord is massless. Take m1 = 2.00 kg, m2 = 7.65 kg, and ? = 49.0°. A triangular structure is oriented such that its base rests upon a horizontal surface, its left side is perpendicular to its base, and its right side forms an incline of angle ?. A pulley is attached to the structure's apex. Two objects are connected by a cord that passes over the pulley. A circular object labeled m1 is attached to the to the left end of the cord and hangs freely. A rectangular object labeled m2 is attached to the end of the cord and rests upon the incline. (a) What are the magnitude of acceleration (in m/s2) of the block and sphere? _____m/s2 (b) What is the tension (in N) in the cord? (Enter the magnitude.) ____N (c) What is the speed (in m/s) of each object 2.25 s after being released from rest? ____m/s (d)What If? If the incline under m2 is rough, what is the minimum value…
The figure below shows a cylinder, which is rotating in clockwise direction. A lever is pushing onto the cylinder, thus exerting a braking torque. The lever itself is loaded by a force FE . a) Draw the free-body diagram of the lever, determine the direction of the kinetic friction force.
b = 2.05 m Submit Previous Answers With its engine removed, the mass of the car shown in ( Figure 1) is 1400 kg and its center of mass is at C. The mass of the engine is 300 kg. ✓ Correct Figure T 0.45 m > 1 of 1 Part B Review If the car is parked on a 15° slope facing up the slope, what total normal force is exerted by the road on the rear wheels B? Express your answer using three significant figures and include the appropriate units. ? UA 0.6 m A-1.14 m- B B = Value Units b. -2.60 m- ་ Submit Previous Answers Request Answer × Incorrect; Try Again