Gaseous hydrogen at a constant pressure is to flow within the inside of a thin-walled cylindrical tube of nickel. Consider the steady-state diffusion of hydrogen through the walls of this cylindrical nickel tube. One design calls for a diffusion flux of 5 x 10-8 mol/m2.s, a tube radius of 0.125 m, and inside and outside pressures of 0.5065 MPa (5 atm) and 0.0203 MPa (0.2 atm), respectively; the maximum allowable temperature is 450°C. In case the wall thickness is 2 mm and the yield strength is greater than twice the circumferential stress, what would be the temperature to give this diffusion flux and yet ensure that the tube walls will not experience any permanent deformation?

Gaseous hydrogen at a constant pressure is to flow within the inside of a thin-walled cylindrical tube of nickel. Consider the steady-state diffusion of hydrogen through the walls of this cylindrical nickel tube. One design calls for a diffusion flux of 5 x 10-8 mol/m2.s, a tube radius of 0.125 m, and inside and outside pressures of 0.5065 MPa (5 atm) and 0.0203 MPa (0.2 atm), respectively; the maximum allowable temperature is 450°C. In case the wall thickness is 2 mm and the yield strength is greater than twice the circumferential stress, what would be the temperature to give this diffusion flux and yet ensure that the tube walls will not experience any permanent deformation?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

6. A sheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200C and is permitted to achieve a steady-state diffusion condition. The diffusion coefficient for nitrogen in steel at this temperature is 6  10-11 m2/s, and the diffusion flux is found to be 1.2  10-7 kg/m2-s. Also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3. How far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3? Assume a linear concentration profile.
• Consider the radial diffusion of a gaseous species (A) through the wall of a plastic tube (B), and allow for chemical reactions that provide for the depletion of A at a rate N' A (kmol · s-1. m-3 ). Derive a differential equation that governs the molar concentration of species A in the plastic.
A thin plastic membrane is used to separate helium from a current.gaseous. Under steady-state conditions, a concentration of helium in the membrane is known to be 0.02 and 0.005 kmol/m³ on the inner and outer surfaces, respectively. If the membrane has a thickness of 1 mm and the coefficient ofbinary diffusion of helium to plastic is 10^(-9) m²/ s, what is the value of the flow diffusive?
A l-mm sheet of FCC iron is used to contain nitrogen in a heat exchanger at 1200°C. The concentration of N at one surface is 0.04 atomic percent and the concentration at the second surface is 0.005 atomic percent. Determine the flux of nitrogen through the foil in N atoms/cm2's. Hint: The diffusion coefficient D is related to temperature by an Arrhenius-type еquation D = Doexp(-) RT For the diffusion couple N in FCC iron, the activation energy Q is 8.269 kJ/mol and Do is 0.34 mm²/s. R is the gas constant 8.314 J/mol·K.
You are asked to determine the concentration of a diffusing gas at a given depth on a metal surface after a given time. If you know the temperature of the metal, the surface concentration of the gas, and the diffusion coefficient, describe how you would approach this problem.
A plate of iron is exposed to a carburizing atmosphere on one side and a decarburizing atmosphere on the other side at 850 oC. If a condition of steady state is achieved, calculate the diffusion flux of carbon through the plate if the concentrations of carbon at positions of 5 and 10 mm beneath the carburizing surface are 1.4 and 0.8 kg/m3, respectively. Assume a diffusion coefficient of 3 x 10 -11 m2/s at this temperature.
Give me right solution according to the question... Careful with given units
The diffusion coefficient of Ni in Cu at 1025 C is 10-9 cm2 s-1. How long does it take for the mean square root of the distance to be 1 cm?
Consider a sheet of Iron which is maintained in an atmosphere filled with nitrogen and is permitted to achieve and steady state diffuseion. The thickness of the sheet is 6.5mm. The diffusion coefficient of nitrogen in iron is 1.9 × 10-11 m2/s at 6750C. If the concentration on the high-pressure side of the plate is 3kg/m3 and the diffusion flux is 1.7 × 10-8 kg/m2 s . Determine the concentration on the low-pressure side of the plate if the depth of concentration of low-pressure side is 0.001 m. A) 3.2 kg/m3 B) -3 kg/m3 C) 2.1 kg/m3 D) 0.001 kg/m3
Solve with me time 40 minutes
Problem 1. A sheet of BCC iron 1 mm thick was exposed to a carburizing gas atmosphere on one side and a decarburizing atmosphere on the other side at 725°C. After having reached steady state, the iron was quickly cooled to room temperature. The carbon concentrations at the two surfaces of the sheet were determined to be 0.012 and 0.0075 wt%, respectively. Compute the diffusion coefficient if the diffusion flux is 1.4 × 10 -³ kg/m²-s.
I need it fast handwritten only